smartcard.h

STM32F103ZET6+UCOSII+UCGUI源码

/******************** (C) COPYRIGHT 2008 STMicroelectronics ********************
* File Name          : smartcard.h
* Author             : MCD Application Team
* Version            : V1.1.1
* Date               : 06/13/2008
* Description        : This file contains all the functions prototypes for the
*                      Smartcard firmware library.
********************************************************************************
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME.
* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT,
* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE
* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING
* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*******************************************************************************/

/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __SMARTCARD_H
#define __SMARTCARD_H

/* Includes ------------------------------------------------------------------*/
#include "stm32f10x_lib.h"

/* Exported constants --------------------------------------------------------*/
#define T0_PROTOCOL        0x00  /* T0 protocol */
#define DIRECT             0x3B  /* Direct bit convention */
#define INDIRECT           0x3F  /* Indirect bit convention */
#define SETUP_LENGTH       20
#define HIST_LENGTH        20
#define LCmax              20
#define SC_Receive_Timeout 0x4000  /* Direction to reader */

/* SC Tree Structure -----------------------------------------------------------
                              MasterFile
                           ________|___________
                          |        |           |
                        System   UserData     Note
------------------------------------------------------------------------------*/

/* SC ADPU Command: Operation Code -------------------------------------------*/
#define SC_CLA_GSM11       0xA0

/*------------------------ Data Area Management Commands ---------------------*/
#define SC_SELECT_FILE     0xA4
#define SC_GET_RESPONCE    0xC0
#define SC_STATUS          0xF2
#define SC_UPDATE_BINARY   0xD6
#define SC_READ_BINARY     0xB0
#define SC_WRITE_BINARY    0xD0
#define SC_UPDATE_RECORD   0xDC
#define SC_READ_RECORD     0xB2

/*-------------------------- Administrative Commands -------------------------*/ 
#define SC_CREATE_FILE     0xE0

/*-------------------------- Safety Management Commands ----------------------*/
#define SC_VERIFY          0x20
#define SC_CHANGE          0x24
#define SC_DISABLE         0x26
#define SC_ENABLE          0x28
#define SC_UNBLOCK         0x2C
#define SC_EXTERNAL_AUTH   0x82
#define SC_GET_CHALLENGE   0x84

/*-------------------------- Answer to reset Commands ------------------------*/ 
#define SC_GET_A2R         0x00


/* SC STATUS: Status Code ----------------------------------------------------*/
#define SC_EF_SELECTED     0x9F
#define SC_DF_SELECTED     0x9F
#define SC_OP_TERMINATED   0x9000

/* Smartcard Voltage */
#define SC_Voltage_5V      0
#define SC_Voltage_3V      1

/* Smartcard HW implementation on STM3210E_EVAL evaluation board */
#define SC_3_5V                  GPIO_Pin_0  /* GPIOB Pin 0 */
#define SC_RESET                 GPIO_Pin_11 /* GPIOB Pin 11 */
#define SC_CMDVCC                GPIO_Pin_6  /* GPIOC Pin 6  */
#define SC_OFF                   GPIO_Pin_7  /* GPIOC Pin 7 */ 
#define GPIO_3_5V                GPIOB
#define GPIO_RESET               GPIOB
#define GPIO_CMDVCC              GPIOC
#define GPIO_OFF                 GPIOC
#define RCC_APB2Periph_3_5V      RCC_APB2Periph_GPIOB
#define RCC_APB2Periph_RESET     RCC_APB2Periph_GPIOB
#define RCC_APB2Periph_CMDVCC    RCC_APB2Periph_GPIOC
#define RCC_APB2Periph_OFF       RCC_APB2Periph_GPIOC
#define SC_EXTI                  EXTI_Line7
#define SC_PortSource            GPIO_PortSourceGPIOC
#define SC_PinSource             GPIO_PinSource7
#define SC_EXTI_IRQ              EXTI9_5_IRQChannel
  
/* Exported types ------------------------------------------------------------*/
typedef enum
{
  SC_POWER_ON = 0x00,
  SC_RESET_LOW = 0x01,
  SC_RESET_HIGH = 0x02,
  SC_ACTIVE = 0x03,	 
  SC_ACTIVE_ON_T0 = 0x04,
  SC_POWER_OFF = 0x05
} SC_State;

/* ATR structure - Answer To Reset -------------------------------------------*/
typedef struct
{
  u8 TS;               /* Bit Convention */
  u8 T0;               /* High nibble = Number of setup byte; low nibble = Number of historical byte */
  u8 T[SETUP_LENGTH];  /* Setup array */
  u8 H[HIST_LENGTH];   /* Historical array */
  u8 Tlength;          /* Setup array dimension */
  u8 Hlength;          /* Historical array dimension */
} SC_ATR;

/* ADPU-Header command structure ---------------------------------------------*/
typedef struct
{
  u8 CLA;  /* Command class */
  u8 INS;  /* Operation code */
  u8 P1;   /* Selection Mode */
  u8 P2;   /* Selection Option */
} SC_Header;

/* ADPU-Body command structure -----------------------------------------------*/
typedef struct 
{
  u8 LC;           /* Data field length */
  u8 Data[LCmax];  /* Command parameters */
  u8 LE;           /* Expected length of data to be returned */
} SC_Body;

/* ADPU Command structure ----------------------------------------------------*/
typedef struct
{
  SC_Header Header;
  SC_Body Body;
} SC_ADPU_Commands;

/* SC response structure -----------------------------------------------------*/
typedef struct
{
  u8 Data[LCmax];  /* Data returned from the card */
  u8 SW1;          /* Command Processing status */
  u8 SW2;          /* Command Processing qualification */
} SC_ADPU_Responce;

/* Exported macro ------------------------------------------------------------*/
/* Exported functions ------------------------------------------------------- */
/* APPLICATION LAYER ---------------------------------------------------------*/
void SC_Handler(SC_State *SCState, SC_ADPU_Commands *SC_ADPU, SC_ADPU_Responce *SC_Response);
void SC_PowerCmd(FunctionalState NewState);
void SC_Reset(BitAction ResetState);
void SC_ParityErrorHandler(void);
void SC_PTSConfig(void);

#endif /* __SMARTCARD_H */

/******************* (C) COPYRIGHT 2008 STMicroelectronics *****END OF FILE****/