doprntx.c

Support is available from MIPS Technologies Inc. - problems should be addressed to [e-mail]

/************************************************************************
 *
 *  doprntx.c
 *
 *  Print formatting functions
 *
 * ######################################################################
 *
 * mips_start_of_legal_notice
 * 
 * Copyright (c) 2002 MIPS Technologies, Inc. All rights reserved.
 *
 *
 * Unpublished rights (if any) reserved under the Copyright Laws of the
 * United States of America.
 *
 * If this document is provided in source format (i.e., in a modifiable form
 * such as in FrameMaker or Microsoft Word format), then its use and
 * distribution is subject to a written agreement with MIPS Technologies,
 * Inc. ("MIPS Technologies"). UNDER NO CIRCUMSTANCES MAY A DOCUMENT
 * PROVIDED IN SOURCE FORMAT BE DISTRIBUTED TO A THIRD PARTY WITHOUT THE
 * EXPRESS WRITTEN CONSENT OF MIPS TECHNOLOGIES.
 *
 * This document contains information that is proprietary to MIPS
 * Technologies. Any copying, reproducing, modifying, or use of this
 * information (in whole or in part) which is not expressly permitted in
 * writing by MIPS Technologies or a contractually-authorized third party is
 * strictly prohibited. At a minimum, this information is protected under
 * unfair competition and copyright laws. Violations thereof may result in
 * criminal penalties and fines.
 *
 * MIPS Technologies or any contractually-authorized third party reserves
 * the right to change the information contained in this document to improve
 * function, design or otherwise. MIPS Technologies does not assume any
 * liability arising out of the application or use of this information, or
 * of any error of omission in such information. Any warranties, whether
 * express, statutory, implied or otherwise, including but not limited to
 * the implied warranties of merchantability or fitness for a particular
 * purpose, are excluded. Any license under patent rights or any other
 * intellectual property rights owned by MIPS Technologies or third parties
 * shall be conveyed by MIPS Technologies or any contractually-authorized
 * third party in a separate license agreement between the parties.
 *
 * The information contained in this document shall not be exported or
 * transferred for the purpose of reexporting in violation of any U.S. or
 * non-U.S. regulation, treaty, Executive Order, law, statute, amendment or
 * supplement thereto.
 *
 * The information contained in this document constitutes one or more of the
 * following: commercial computer software, commercial computer software
 * documentation or other commercial items. If the user of this information,
 * or any related documentation of any kind, including related technical
 * data or manuals, is an agency, department, or other entity of the United
 * States government ("Government"), the use, duplication, reproduction,
 * release, modification, disclosure, or transfer of this information, or
 * any related documentation of any kind, is restricted in accordance with
 * Federal Acquisition Regulation 12.212 for civilian agencies and Defense
 * Federal Acquisition Regulation Supplement 227.7202 for military agencies.
 * The use of this information by the Government is further restricted in
 * accordance with the terms of the license agreement(s) and/or applicable
 * contract terms and conditions covering this information from MIPS
 * 
 * mips_end_of_legal_notice
 * 
 *
 ************************************************************************/

#include <ctype.h>
#include <stdarg.h>
#include <yamon_api.h>

#define	BUF	32
#define CR      0x0D
#define LF      0x0A


#define	ARG()								\
            _ulong =							\
	        (flags & SHORTINT) ?					\
	            (UINT32)((INT16)((UINT16)va_arg(argp, UINT32))) :	\
		    (UINT32)va_arg(argp, UINT32);

#define	todigit(c)	((c) - '0')
#define	tochar(n)	((n) + '0')

/* have to deal with the negative buffer count kludge */
#define	NEGATIVE_COUNT_KLUDGE

#define	LONGINT		0x01		/* long integer 		*/
#define	LONGDBL		0x02		/* long double; unimplemented 	*/
#define	SHORTINT	0x04		/* short integer 		*/
#define	ALT		0x08		/* alternate form 		*/
#define	LADJUST		0x10		/* left adjustment 		*/
#define	ZEROPAD		0x20		/* zero (as opposed to blank) pad */
#define	HEXPREFIX	0x40		/* add 0x or 0X prefix 		*/


int _doprntx(
	char 		*fmt0,
	va_list 	argp,
	void		(*putc)(),
	char		**pca)
{
	UINT8 	*fmt;		/* format string 			*/
	int 	ch;		/* character from fmt 			*/
	int 	cnt;		/* return value accumulator 		*/
	int 	n;		/* random handy integer 		*/
	char 	*t;		/* buffer pointer */
	UINT32 	_ulong;		/* integer arguments %[diouxX] 		*/
	int 	base;		/* base for [diouxX] conversion 	*/
	int 	dprec;		/* decimal precision in [diouxX] 	*/
	int 	fieldsz;	/* field size expanded by sign, etc 	*/
	int 	flags;		/* flags as above 			*/
	int 	fpprec;		/* `extra' floating precision in [eEfgG]*/
	int 	prec;		/* precision from format (%.3d), or -1 	*/
	int 	realsz;		/* field size expanded by decimal precision */
	int 	size;		/* size of converted field or string 	*/
	int 	width;		/* width from format (%8d), or 0 	*/
	char	sign;		/* sign prefix (' ', '+', '-', or \0) 	*/
	char	*digs;		/* digits for [diouxX] conversion 	*/
	char 	buf[BUF];	/* space for %c, %[diouxX], %[eEfgG] 	*/

	fmt = (UINT8*)fmt0;
	digs = "0123456789abcdef";

	for (cnt = 0;; ++fmt) {
		for (; (ch = *fmt) && ch != '%';
		     ++cnt, ++fmt)
		    if(ch!='\n')
		      putc(ch, pca);
		    else
		    { putc(CR, pca); putc(LF, pca); ++cnt; };
		if (!ch)
			return (cnt);

		flags = 0; dprec = 0; fpprec = 0; width = 0;
		prec = -1;
		sign = '\0';

rflag:		switch (*++fmt) {
		case ' ':
			/*
			 * ``If the space and + flags both appear, the space
			 * flag will be ignored.''
			 *	-- ANSI X3J11
			 */
			if (!sign)
				sign = ' ';
			goto rflag;
		case '#':
			flags |= ALT;
			goto rflag;
		case '*':
			/*
			 * ``A negative field width argument is taken as a
			 * - flag followed by a  positive field width.''
			 *	-- ANSI X3J11
			 * They don't exclude field widths read from args.
			 */
			if ((width = va_arg(argp, int)) >= 0)
				goto rflag;
			width = -width;
			/* FALLTHROUGH */
		case '-':
			flags |= LADJUST;
			goto rflag;
		case '+':
			sign = '+';
			goto rflag;
		case '.':
			if (*++fmt == '*')
				n = va_arg(argp, int);
			else {
				n = 0;
				while (isascii(*fmt) && isdigit(*fmt))
					n = 10 * n + todigit(*fmt++);
				--fmt;
			}
			prec = n < 0 ? -1 : n;
			goto rflag;
		case '0':
			/*
			 * ``Note that 0 is taken as a flag, not as the
			 * beginning of a field width.''
			 *	-- ANSI X3J11
			 */
			flags |= ZEROPAD;
			goto rflag;
		case '1': case '2': case '3': case '4':
		case '5': case '6': case '7': case '8': case '9':
			n = 0;
			do {
				n = 10 * n + todigit(*fmt);
			} while (isascii(*++fmt) && isdigit(*fmt));
			width = n;
			--fmt;
			goto rflag;
		case 'L':
			flags |= LONGDBL;
			goto rflag;
		case 'h':
			flags |= SHORTINT;
			goto rflag;
		case 'l':
			flags |= LONGINT;
			goto rflag;
		case 'c':
			*(t = buf) = va_arg(argp, int);
			size = 1;
			sign = '\0';
			goto pforw;
		case 'D':
			flags |= LONGINT;
			/*FALLTHROUGH*/
		case 'd':
		case 'i':
			ARG();
			if ((long)_ulong < 0) {
				_ulong = -_ulong;
				sign = '-';
			}
			base = 10;
			goto number;
		case 'n':
			if (flags & LONGINT)
				*va_arg(argp, long *) = cnt;
			else if (flags & SHORTINT)
				*va_arg(argp, short *) = cnt;
			else
				*va_arg(argp, int *) = cnt;
			break;			
		case 'O':
			flags |= LONGINT;
			/*FALLTHROUGH*/
		case 'o':
			ARG();
			base = 8;
			goto nosign;
		case 'p':
			/*
			 * ``The argument shall be a pointer to void.  The
			 * value of the pointer is converted to a sequence
			 * of printable characters, in an implementation-
			 * defined manner.''
			 *	-- ANSI X3J11
			 */
			/* NOSTRICT */
			_ulong = (UINT32)va_arg(argp, void *);
			base = 16;
			goto nosign;
		case 's':
			if (!(t = va_arg(argp, char *)))
				t = "(null)";
			if (prec >= 0) {
				/*
				 * can't use strlen; can only look for the
				 * NUL in the first `prec' characters, and
				 * strlen() will go further.
				 */
				char *p, *memchr();

				if ((p = memchr(t, 0, prec))) {
					size = p - t;
					if (size > prec)
						size = prec;
				} else
					size = prec;
			} else
				size = strlen(t);
			sign = '\0';
			goto pforw;
		case 'U':
			flags |= LONGINT;
			/*FALLTHROUGH*/
		case 'u':
			ARG();
			base = 10;
			goto nosign;
		case 'X':
			digs = "0123456789ABCDEF";
			/* FALLTHROUGH */
		case 'x':
			ARG();
			base = 16;
			/* leading 0x/X only if non-zero */
			if (flags & ALT && _ulong != 0)
				flags |= HEXPREFIX;

			/* unsigned conversions */
nosign:			sign = '\0';
			/*
			 * ``... diouXx conversions ... if a precision is
			 * specified, the 0 flag will be ignored.''
			 *	-- ANSI X3J11
			 */
number:			if ((dprec = prec) >= 0)
				flags &= ~ZEROPAD;

			/*
			 * ``The result of converting a zero value with an
			 * explicit precision of zero is no characters.''
			 *	-- ANSI X3J11
			 */
			t = buf + BUF;
			if (_ulong != 0 || prec != 0) {
				do {
					*--t = digs[_ulong % base];
					_ulong /= base;
				} while (_ulong);
				digs = "0123456789abcdef";
				if (flags & ALT && base == 8 && *t != '0')
					*--t = '0'; /* octal leading 0 */
			}
			size = buf + BUF - t;

pforw:
			/*
			 * All reasonable formats wind up here.  At this point,
			 * `t' points to a string which (if not flags&LADJUST)
			 * should be padded out to `width' places.  If
			 * flags&ZEROPAD, it should first be prefixed by any
			 * sign or other prefix; otherwise, it should be blank
			 * padded before the prefix is emitted.  After any
			 * left-hand padding and prefixing, emit zeroes
			 * required by a decimal [diouxX] precision, then print
			 * the string proper, then emit zeroes required by any
			 * leftover floating precision; finally, if LADJUST,
			 * pad with blanks.
			 */

			/*
			 * compute actual size, so we know how much to pad
			 * fieldsz excludes decimal prec; realsz includes it
			 */
			fieldsz = size + fpprec;
			if (sign)
				fieldsz++;
			if (flags & HEXPREFIX)
				fieldsz += 2;
			realsz = dprec > fieldsz ? dprec : fieldsz;

			/* right-adjusting blank padding */
			if ((flags & (LADJUST|ZEROPAD)) == 0 && width)
				for (n = realsz; n < width; n++)
					putc(' ', pca);
			/* prefix */
			if (sign)
				putc(sign, pca);
			if (flags & HEXPREFIX) {
				putc('0', pca);
				putc((char)*fmt, pca);
			}
			/* right-adjusting zero padding */
			if ((flags & (LADJUST|ZEROPAD)) == ZEROPAD)
				for (n = realsz; n < width; n++)
					putc('0', pca);
			/* leading zeroes from decimal precision */
			for (n = fieldsz; n < dprec; n++)
				putc('0', pca);

			/* the string or number proper */
			n=size;
			while (--n >= 0)
			  putc(*t++, pca);
			/* trailing f.p. zeroes */
			while (--fpprec >= 0)
				putc('0', pca);
			/* left-adjusting padding (always blank) */
			if (flags & LADJUST)
				for (n = realsz; n < width; n++)
					putc(' ', pca);
			/* finally, adjust cnt */
			cnt += width > realsz ? width : realsz;
			break;
		case '\0':	/* "%?" prints ?, unless ? is NULL */
			return (cnt);
		default:
			putc((char)*fmt, pca);
			cnt++;
		}
	}
	/* NOTREACHED */
}