raid1.in

linux集群服务器软件代码包

#!/bin/sh
#
# $Id: Raid1.in,v 1.1 2004/08/27 09:34:14 lars Exp $
# 
# Raid1
#      Description: Manages a software Raid1 device on a shared storage medium.
#  Original Author: Eric Z. Ayers ([e-mail])
# Original Release: 25 Oct 2000
#          Support: [e-mail]
#     RAID patches: http://people.redhat.com/mingo/raid-patches/
# Word to the Wise: http://lwn.net/2000/0810/a/raid-faq.php3
#  Sympathetic Ear: mailto:[e-mail]
#
# usage: $0 <raidtab_config_file> <md_dev_name> {start|stop|status}
#
# in /etc/ha.d/haresources, use a line such as:
# nodea  10.0.0.170 Raid1::/etc/raidtab.md0::/dev/md0 Filesystem::/dev/md0::/data1::ext2
#
# This script assumes you are running the so-called RAID v.90 patches vs.
# the Linux 2.2 kernel (distributed with RedHat 6.2).   I have not used 
# kernel version 2.4.   
#
# The "start" arg starts up the raid device
# The "stop" arg stops it.  NOTE: all filesystems must be unmounted
#  and no processes should be accessing the device.
# The "status" arg just prints out whether the device is running or not
#
# 
# DISCLAIMER: Use at your own risk!
#
#  Besides all of the usual legalese that accompanies free software, 
#  I will warn you that I do not yet use this kind of setup (software RAID 
#  over shared storage) in production, and I have reservations about doing so.
#
#  The linux md driver/scsi drivers under Raid 0.90 and kernel version 2.2 
#  do not behave well when a drive is in the process of going bad.  
#  The kernel slows down, but doesn't completely crash.  This is about the 
#  worst possible thing that could happen in an un-attended HA type 
#  environment.  (Once the system is rebooted, the sofware raid stuff works 
#  like a champ.)  
#  My other reservation has to do with the interation of RAID recovery with 
#  journaling filesystems and other parts of the kernel.  Subscribe to 
#  [e-mail]  for other opinions and possible solutions.
#
#  -EZA 25 Oct 2000 
# 
# SETUP:
#
# You might need to pass the command line parameter: raid=noautodetect 
# in an HA environment so that the kernel doesn't automatically start
# up your raid partitions when you boot the node.  This means that it isn't
# going to work to use RAID for the system disks and the shared disks.
#
# 0) partition the disks to use for RAID.  Use normal Linux partition 
#     types, not the RAID autodetect type for your partitions.
# 1) Create /etc/raidtab.md?  on both systems (see example file below)
# 2) Initialize your raid partition with 
#     /sbin/mkraid --configfile /etc/raidtab.md? /dev/md?
# 3) Format your filesystem
#     mke2fs /dev/md0  # for ext2fs... a journaling filesystem would be nice
# 3) Create the mount point on both systems.
#     DO NOT add your raid filesystem to /etc/fstab
# 4) copy this script (to /etc/rc.d/init.d if you wish) and edit it to
#    reflect your desired settings.
# 5) Modify the heartbeat 'haresources' setup file
# 6) unmount the filesystem and stop the raid device with 'raidstop'
# 7) fire up heartbeat!
#
# 
# EXAMPLE config file /etc/raidtab.md0
# This file must exist on both machines!
#
#  raiddev		    /dev/md0
#  raid-level		    1
#  nr-raid-disks		    2
#  chunk-size		    64k
#  persistent-superblock	    1
#  #nr-spare-disks	    0
#    device	    /dev/sda1
#    raid-disk     0
#    device	    /dev/sdb1
#    raid-disk     1
#

unset LC_ALL; export LC_ALL
unset LANGUAGE; export LANGUAGE

prefix=@prefix@
exec_prefix=@exec_prefix@
. @sysconfdir@/ha.d/shellfuncs


# Utilities used by this script
MODPROBE=@MODPROBE@
FSCK=@FSCK@
FUSER=@FUSER@
RAIDSTART=@RAIDSTART@
MOUNT=@MOUNT@
UMOUNT=@UMOUNT@
RAIDSTOP=@RAIDSTOP@

check_util () {
    if [ ! -x "$1" ] ; then
	ha_log "ERROR: setup problem: Couldn't find utility $1"
	exit 1
    fi
}

usage() {
cat <<-EOT;
	usage: $0 <raidtab_config_file> <md_dev_name> {start|stop|status}

	<raidtab_config_file> : name of MD configuration file. e.g. /etc/raidtab
	<md_dev_name>         : of the form /dev/md?? (the block device to use)

	$Id: Raid1.in,v 1.1 2004/08/27 09:34:14 lars Exp $
EOT
}

# Check the arguments passed to this script
RAIDTAB_CONFIG=$1
MDDEV=$2

if [ ! -f "$1" ] ; then
	ha_log "ERROR: Couldn't open file $1"
	usage
	exit 1
fi

if [ ! -b "$MDDEV" ] ; then
	ha_log "ERROR: Couldn't find MD device $MDDEV. Expected /dev/md* to exist"
	usage
	exit 1
fi

# strip off the /dev/ prefix to get the name of the MD device
MD=`echo $MDDEV | sed -e 's/\/dev\///'`

# Check to make sure the utilites are found
check_util $MODPROBE
check_util $FUSER
check_util $RAIDSTART
check_util $MOUNT
check_util $UMOUNT
check_util $RAIDSTOP


# Look for the 'start' or 'stop' argument
case "$3" in

#
# START: Start up the RAID device
#
start)

# See if the md device is already mounted.
# NOTE: this will not work right if you have more than 10 md devices!
$MOUNT | grep -e "^$MDDEV" >/dev/null
if [ $? -ne 1 ] ; then
    ha_log "ERROR: Device $MDDEV is already mounted!"
    exit 1;
fi


# Insert SCSI module
$MODPROBE scsi_hostadapter
if [ $? -ne 0 ] ; then
    ha_log "WARNING: Couldn't insert SCSI module."
fi

# Insert raid personality module
$MODPROBE raid1
if [ $? -ne 0 ] ; then
    ha_log "ERROR: Couldn't insert RAID1 module"
    exit 1
fi

# Run raidstart to start up the RAID array
$RAIDSTART --configfile $RAIDTAB_CONFIG $MDDEV
if [ $? -ne 0 ] ; then
	ha_log "ERROR: Couldn't start RAID for $MDDEV"
	exit 1
fi

;;

#
# STOP: stop the RAID device
#
stop)

# See if the MD device is online
grep -e "^$MD" /proc/mdstat >/dev/null
if [ $? -ne 0 ] ; then
        ha_log "WARNING: device $MD is not online according to kernel"
	exit 0
fi

# See if the MD device is mounted
# NOTE: this will not work right if you have more than 10 md devices!
$MOUNT | grep -e "^$MDDEV" >/dev/null
if [ $? -ne 1 ] ; then

	# Kill all processes open on filesystem
	$FUSER -mk $MOUNTPOINT

	# the return from fuser doesn't tell us much
	#if [ $? -ne 0 ] ; then
	#	ha_log "ERROR: Couldn't kill processes on $MOUNTPOINT"
	#	exit 1;
	#fi

	# Unmount the filesystem
	$UMOUNT $MDDEV
	if [ $? -ne 0 ] ; then
		ha_log "ERROR: Couldn't unmount filesystem for $MDDEV"
		exit 1
	fi

	$MOUNT | grep -e "^$MDDEV" >/dev/null
	if [ $? -ne 1 ] ; then
	    ha_log "ERROR: filesystem for $MDDEV still mounted"
	    exit 1
	fi
fi

# Turn off raid
$RAIDSTOP --configfile /etc/raidtab.$MD $MDDEV
if [ $? -ne 0 ] ; then
	ha_log "ERROR: Couldn't stop RAID for $MDDEV"
	exit 1
fi

;;

#
# STATUS: is the raid device online or offline?
#
status) 

# See if the MD device is online
grep -e "^$MD" /proc/mdstat >/dev/null
if [ $? -ne 0 ] ; then
    echo "stopped"
else
    echo "running"
fi
    
;;

*)
    echo "This script should be run with the third argument 'start', 'stop', or 'status'"
    exit 1
;;
esac

# If you got to this point, chances are everything is O.K.
exit 0;