makefile.in

linux集群服务器软件代码包

#	If your version of lex or yacc is broken, then work around	
#	it.  This has been done for the current Linux lex/yacc
#	(bison version 1.875  and flex version 2.5.4 and others)
#
#	Setting CFLAGS here is specifically disallowed by automake
#	and causes a warning.
#
#	So, I reverted an incorrect  CFLAGS change and restored the comments
#	above which used to be here for these two reasons.  Before you remove
#	these comments or turn off warnings *again*, let's discuss this.
#
AM_CFLAGS = -DPIDFILE='"$(PIDFILE)"'
AM_YFLAGS = -d
recoverymgrd_SOURCES = conf_yacc.y conf_lex.l recoverymgrd.c
noinst_HEADERS = recoverymgrd.h configfile.h conf_yacc.h
recoverymgrd_CFLAGS = -DHA_VARLIBDIR='"@HA_VARLIBDIR@"'
recoverymgrd_LDADD = $(COMMONLIBS) 				\
			$(top_builddir)/lib/pils/libpils.la		\
			$(top_builddir)/lib/apphb/libapphb.la		\
			$(LIBRT)

recoverymgrd_LDFLAGS = @LIBADD_DL@ @LIBLTDL@ -export-dynamic		\
			-dlpreopen-force 				\
			-dlopen-self

all: all-am

.SUFFIXES:
.SUFFIXES: .c .l .lo .o .obj .y
$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
	@for dep in $?; do \
	  case '$(am__configure_deps)' in \
	    *$$dep*) \
	      cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
		&& exit 0; \
	      exit 1;; \
	  esac; \
	done; \
	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu  telecom/recoverymgrd/Makefile'; \
	cd $(top_srcdir) && \
	  $(AUTOMAKE) --gnu  telecom/recoverymgrd/Makefile
.PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
	@case '$?' in \
	  *config.status*) \
	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
	  *) \
	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
	esac;

$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh

$(top_srcdir)/configure:  $(am__configure_deps)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
install-halibPROGRAMS: $(halib_PROGRAMS)
	@$(NORMAL_INSTALL)
	test -z "$(halibdir)" || $(mkdir_p) "$(DESTDIR)$(halibdir)"
	@list='$(halib_PROGRAMS)'; for p in $$list; do \
	  p1=`echo $$p|sed 's/$(EXEEXT)$$//'`; \
	  if test -f $$p \
	     || test -f $$p1 \
	  ; then \
	    f=`echo "$$p1" | sed 's,^.*/,,;$(transform);s/$$/$(EXEEXT)/'`; \
	   echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) --mode=install $(halibPROGRAMS_INSTALL) '$$p' '$(DESTDIR)$(halibdir)/$$f'"; \
	   $(INSTALL_PROGRAM_ENV) $(LIBTOOL) --mode=install $(halibPROGRAMS_INSTALL) "$$p" "$(DESTDIR)$(halibdir)/$$f" || exit 1; \
	  else :; fi; \
	done

uninstall-halibPROGRAMS:
	@$(NORMAL_UNINSTALL)
	@list='$(halib_PROGRAMS)'; for p in $$list; do \
	  f=`echo "$$p" | sed 's,^.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/'`; \
	  echo " rm -f '$(DESTDIR)$(halibdir)/$$f'"; \
	  rm -f "$(DESTDIR)$(halibdir)/$$f"; \
	done

clean-halibPROGRAMS:
	@list='$(halib_PROGRAMS)'; for p in $$list; do \
	  f=`echo $$p|sed 's/$(EXEEXT)$$//'`; \
	  echo " rm -f $$p $$f"; \
	  rm -f $$p $$f ; \
	done
conf_yacc.h: conf_yacc.c
	@if test ! -f $@; then \
	  rm -f conf_yacc.c; \
	  $(MAKE) conf_yacc.c; \
	else :; fi
recoverymgrd$(EXEEXT): $(recoverymgrd_OBJECTS) $(recoverymgrd_DEPENDENCIES) 
	@rm -f recoverymgrd$(EXEEXT)
	$(LINK) $(recoverymgrd_LDFLAGS) $(recoverymgrd_OBJECTS) $(recoverymgrd_LDADD) $(LIBS)

mostlyclean-compile:
	-rm -f *.$(OBJEXT)

distclean-compile:
	-rm -f *.tab.c

@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/recoverymgrd-conf_lex.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/recoverymgrd-conf_yacc.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/recoverymgrd-recoverymgrd.Po@am__quote@

.c.o:
@am__fastdepCC_TRUE@	if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ $<; \
@am__fastdepCC_TRUE@	then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi
@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@	$(COMPILE) -c $<

.c.obj:
@am__fastdepCC_TRUE@	if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ `$(CYGPATH_W) '$<'`; \
@am__fastdepCC_TRUE@	then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi
@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@	$(COMPILE) -c `$(CYGPATH_W) '$<'`

.c.lo:
@am__fastdepCC_TRUE@	if $(LTCOMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ $<; \
@am__fastdepCC_TRUE@	then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Plo"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi
@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@	$(LTCOMPILE) -c -o $@ $<

recoverymgrd-conf_yacc.o: conf_yacc.c
@am__fastdepCC_TRUE@	if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(recoverymgrd_CFLAGS) $(CFLAGS) -MT recoverymgrd-conf_yacc.o -MD -MP -MF "$(DEPDIR)/recoverymgrd-conf_yacc.Tpo" -c -o recoverymgrd-conf_yacc.o `test -f 'conf_yacc.c' || echo '$(srcdir)/'`conf_yacc.c; \
@am__fastdepCC_TRUE@	then mv -f "$(DEPDIR)/recoverymgrd-conf_yacc.Tpo" "$(DEPDIR)/recoverymgrd-conf_yacc.Po"; else rm -f "$(DEPDIR)/recoverymgrd-conf_yacc.Tpo"; exit 1; fi
@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='conf_yacc.c' object='recoverymgrd-conf_yacc.o' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(recoverymgrd_CFLAGS) $(CFLAGS) -c -o recoverymgrd-conf_yacc.o `test -f 'conf_yacc.c' || echo '$(srcdir)/'`conf_yacc.c

recoverymgrd-conf_yacc.obj: conf_yacc.c
@am__fastdepCC_TRUE@	if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(recoverymgrd_CFLAGS) $(CFLAGS) -MT recoverymgrd-conf_yacc.obj -MD -MP -MF "$(DEPDIR)/recoverymgrd-conf_yacc.Tpo" -c -o recoverymgrd-conf_yacc.obj `if test -f 'conf_yacc.c'; then $(CYGPATH_W) 'conf_yacc.c'; else $(CYGPATH_W) '$(srcdir)/conf_yacc.c'; fi`; \
@am__fastdepCC_TRUE@	then mv -f "$(DEPDIR)/recoverymgrd-conf_yacc.Tpo" "$(DEPDIR)/recoverymgrd-conf_yacc.Po"; else rm -f "$(DEPDIR)/recoverymgrd-conf_yacc.Tpo"; exit 1; fi
@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='conf_yacc.c' object='recoverymgrd-conf_yacc.obj' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(recoverymgrd_CFLAGS) $(CFLAGS) -c -o recoverymgrd-conf_yacc.obj `if test -f 'conf_yacc.c'; then $(CYGPATH_W) 'conf_yacc.c'; else $(CYGPATH_W) '$(srcdir)/conf_yacc.c'; fi`

recoverymgrd-conf_lex.o: conf_lex.c
@am__fastdepCC_TRUE@	if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(recoverymgrd_CFLAGS) $(CFLAGS) -MT recoverymgrd-conf_lex.o -MD -MP -MF "$(DEPDIR)/recoverymgrd-conf_lex.Tpo" -c -o recoverymgrd-conf_lex.o `test -f 'conf_lex.c' || echo '$(srcdir)/'`conf_lex.c; \
@am__fastdepCC_TRUE@	then mv -f "$(DEPDIR)/recoverymgrd-conf_lex.Tpo" "$(DEPDIR)/recoverymgrd-conf_lex.Po"; else rm -f "$(DEPDIR)/recoverymgrd-conf_lex.Tpo"; exit 1; fi
@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='conf_lex.c' object='recoverymgrd-conf_lex.o' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(recoverymgrd_CFLAGS) $(CFLAGS) -c -o recoverymgrd-conf_lex.o `test -f 'conf_lex.c' || echo '$(srcdir)/'`conf_lex.c

recoverymgrd-conf_lex.obj: conf_lex.c
@am__fastdepCC_TRUE@	if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(recoverymgrd_CFLAGS) $(CFLAGS) -MT recoverymgrd-conf_lex.obj -MD -MP -MF "$(DEPDIR)/recoverymgrd-conf_lex.Tpo" -c -o recoverymgrd-conf_lex.obj `if test -f 'conf_lex.c'; then $(CYGPATH_W) 'conf_lex.c'; else $(CYGPATH_W) '$(srcdir)/conf_lex.c'; fi`; \
@am__fastdepCC_TRUE@	then mv -f "$(DEPDIR)/recoverymgrd-conf_lex.Tpo" "$(DEPDIR)/recoverymgrd-conf_lex.Po"; else rm -f "$(DEPDIR)/recoverymgrd-conf_lex.Tpo"; exit 1; fi
@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='conf_lex.c' object='recoverymgrd-conf_lex.obj' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(recoverymgrd_CFLAGS) $(CFLAGS) -c -o recoverymgrd-conf_lex.obj `if test -f 'conf_lex.c'; then $(CYGPATH_W) 'conf_lex.c'; else $(CYGPATH_W) '$(srcdir)/conf_lex.c'; fi`

recoverymgrd-recoverymgrd.o: recoverymgrd.c
@am__fastdepCC_TRUE@	if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(recoverymgrd_CFLAGS) $(CFLAGS) -MT recoverymgrd-recoverymgrd.o -MD -MP -MF "$(DEPDIR)/recoverymgrd-recoverymgrd.Tpo" -c -o recoverymgrd-recoverymgrd.o `test -f 'recoverymgrd.c' || echo '$(srcdir)/'`recoverymgrd.c; \
@am__fastdepCC_TRUE@	then mv -f "$(DEPDIR)/recoverymgrd-recoverymgrd.Tpo" "$(DEPDIR)/recoverymgrd-recoverymgrd.Po"; else rm -f "$(DEPDIR)/recoverymgrd-recoverymgrd.Tpo"; exit 1; fi
@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='recoverymgrd.c' object='recoverymgrd-recoverymgrd.o' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(recoverymgrd_CFLAGS) $(CFLAGS) -c -o recoverymgrd-recoverymgrd.o `test -f 'recoverymgrd.c' || echo '$(srcdir)/'`recoverymgrd.c

recoverymgrd-recoverymgrd.obj: recoverymgrd.c
@am__fastdepCC_TRUE@	if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(recoverymgrd_CFLAGS) $(CFLAGS) -MT recoverymgrd-recoverymgrd.obj -MD -MP -MF "$(DEPDIR)/recoverymgrd-recoverymgrd.Tpo" -c -o recoverymgrd-recoverymgrd.obj `if test -f 'recoverymgrd.c'; then $(CYGPATH_W) 'recoverymgrd.c'; else $(CYGPATH_W) '$(srcdir)/recoverymgrd.c'; fi`; \
@am__fastdepCC_TRUE@	then mv -f "$(DEPDIR)/recoverymgrd-recoverymgrd.Tpo" "$(DEPDIR)/recoverymgrd-recoverymgrd.Po"; else rm -f "$(DEPDIR)/recoverymgrd-recoverymgrd.Tpo"; exit 1; fi
@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='recoverymgrd.c' object='recoverymgrd-recoverymgrd.obj' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(recoverymgrd_CFLAGS) $(CFLAGS) -c -o recoverymgrd-recoverymgrd.obj `if test -f 'recoverymgrd.c'; then $(CYGPATH_W) 'recoverymgrd.c'; else $(CYGPATH_W) '$(srcdir)/recoverymgrd.c'; fi`

.l.c:
	$(LEXCOMPILE) $<
	sed '/^#/ s|$(LEX_OUTPUT_ROOT)\.c|$@|' $(LEX_OUTPUT_ROOT).c >$@
	rm -f $(LEX_OUTPUT_ROOT).c

.y.c:
	$(YACCCOMPILE) $<
	if test -f y.tab.h; then \
	  to=`echo "$*_H" | sed \
                -e 'y/abcdefghijklmnopqrstuvwxyz/ABCDEFGHIJKLMNOPQRSTUVWXYZ/' \
                -e 's/[^ABCDEFGHIJKLMNOPQRSTUVWXYZ]/_/g'`; \
	  sed -e "/^#/!b" -e "s/Y_TAB_H/$$to/g" -e "s|y\.tab\.h|$*.h|" \
            y.tab.h >$*.ht; \
	  rm -f y.tab.h; \
	  if cmp -s $*.ht $*.h; then \
	    rm -f $*.ht ;\
	  else \
	    mv $*.ht $*.h; \
	  fi; \
	fi
	if test -f y.output; then \
	  mv y.output $*.output; \
	fi
	sed '/^#/ s|y\.tab\.c|$@|' y.tab.c >$@t && mv $@t $@
	rm -f y.tab.c

mostlyclean-libtool:
	-rm -f *.lo

clean-libtool:
	-rm -rf .libs _libs

distclean-libtool:
	-rm -f libtool
uninstall-info-am:

ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
	unique=`for i in $$list; do \
	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
	  done | \
	  $(AWK) '    { files[$$0] = 1; } \
	       END { for (i in files) print i; }'`; \
	mkid -fID $$unique
tags: TAGS

TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
		$(TAGS_FILES) $(LISP)
	tags=; \
	here=`pwd`; \
	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
	unique=`for i in $$list; do \
	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
	  done | \
	  $(AWK) '    { files[$$0] = 1; } \
	       END { for (i in files) print i; }'`; \
	if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
	  test -n "$$unique" || unique=$$empty_fix; \
	  $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
	    $$tags $$unique; \
	fi
ctags: CTAGS
CTAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
		$(TAGS_FILES) $(LISP)
	tags=; \
	here=`pwd`; \
	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
	unique=`for i in $$list; do \
	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
	  done | \
	  $(AWK) '    { files[$$0] = 1; } \
	       END { for (i in files) print i; }'`; \
	test -z "$(CTAGS_ARGS)$$tags$$unique" \
	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
	     $$tags $$unique

GTAGS:
	here=`$(am__cd) $(top_builddir) && pwd` \
	  && cd $(top_srcdir) \
	  && gtags -i $(GTAGS_ARGS) $$here

distclean-tags:
	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags

distdir: $(DISTFILES)
	@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
	list='$(DISTFILES)'; for file in $$list; do \
	  case $$file in \
	    $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
	    $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
	  esac; \
	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
	  dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
	  if test "$$dir" != "$$file" && test "$$dir" != "."; then \
	    dir="/$$dir"; \
	    $(mkdir_p) "$(distdir)$$dir"; \
	  else \
	    dir=''; \
	  fi; \
	  if test -d $$d/$$file; then \
	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
	    fi; \
	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
	  else \
	    test -f $(distdir)/$$file \
	    || cp -p $$d/$$file $(distdir)/$$file \
	    || exit 1; \
	  fi; \
	done
check-am: all-am
check: check-am
all-am: Makefile $(PROGRAMS) $(HEADERS)
installdirs:
	for dir in "$(DESTDIR)$(halibdir)"; do \
	  test -z "$$dir" || $(mkdir_p) "$$dir"; \
	done
install: install-am
install-exec: install-exec-am
install-data: install-data-am
uninstall: uninstall-am

install-am: all-am
	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am

installcheck: installcheck-am
install-strip:
	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
	  `test -z '$(STRIP)' || \
	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
mostlyclean-generic:

clean-generic:
	-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)

distclean-generic:
	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)

maintainer-clean-generic:
	@echo "This command is intended for maintainers to use"
	@echo "it deletes files that may require special tools to rebuild."
	-test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
	-rm -f conf_lex.c
	-rm -f conf_yacc.c
	-rm -f conf_yacc.h
clean: clean-am

clean-am: clean-generic clean-halibPROGRAMS clean-libtool \
	mostlyclean-am

distclean: distclean-am
	-rm -rf ./$(DEPDIR)
	-rm -f Makefile
distclean-am: clean-am distclean-compile distclean-generic \
	distclean-libtool distclean-tags

dvi: dvi-am

dvi-am:

html: html-am

info: info-am

info-am:

install-data-am: install-halibPROGRAMS

install-exec-am:

install-info: install-info-am

install-man:

installcheck-am:

maintainer-clean: maintainer-clean-am
	-rm -rf ./$(DEPDIR)
	-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-generic

mostlyclean: mostlyclean-am

mostlyclean-am: mostlyclean-compile mostlyclean-generic \
	mostlyclean-libtool

pdf: pdf-am

pdf-am:

ps: ps-am

ps-am:

uninstall-am: uninstall-halibPROGRAMS uninstall-info-am

.PHONY: CTAGS GTAGS all all-am check check-am clean clean-generic \
	clean-halibPROGRAMS clean-libtool ctags distclean \
	distclean-compile distclean-generic distclean-libtool \
	distclean-tags distdir dvi dvi-am html html-am info info-am \
	install install-am install-data install-data-am install-exec \
	install-exec-am install-halibPROGRAMS install-info \
	install-info-am install-man install-strip installcheck \
	installcheck-am installdirs maintainer-clean \
	maintainer-clean-generic mostlyclean mostlyclean-compile \
	mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
	tags uninstall uninstall-am uninstall-halibPROGRAMS \
	uninstall-info-am

# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT: