bgp4-mib.txt

大名鼎鼎的路由器源码。程序分ZEBRA、OSPFRIP等3个包。程序框架采用一个路由协议一个进程的方式

    BGP4-MIB DEFINITIONS ::= BEGIN

        IMPORTS
            MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE,
            IpAddress, Integer32, Counter32, Gauge32, mib-2
                FROM SNMPv2-SMI
            MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP
                FROM SNMPv2-CONF;

        bgp MODULE-IDENTITY
            LAST-UPDATED "9902100000Z"
            ORGANIZATION "IETF IDR Working Group"
            CONTACT-INFO "E-mail:  [e-mail]

                          Susan Hares  (Editor)
                          Merit Network
                          4251 Plymouth Road
                          Suite C
                          Ann Arbor, MI 48105-2785
                          Tel: [phone]
                          Fax: [phone]
                          E-mail: [e-mail]

                          Jeff Johnson (Editor)
                          RedBack Networks, Inc.
                          1389 Moffett Park Drive
                          Sunnyvale, CA  94089-1134
                          Tel: [phone]
                          Fax: [phone]
                          E-mail: [e-mail]"
            DESCRIPTION
                    "The MIB module for BGP-4."
            REVISION    "9902100000Z"
            DESCRIPTION
                    "Corrected duplicate OBJECT IDENTIFIER
                     assignment in the conformance information."
            REVISION    "9601080000Z"
            DESCRIPTION
                    "1) Fixed the definitions of the traps to
                     make them equivalent to their initial
                     definition in RFC 1269.
                     2) Added compliance and conformance info."
            ::= { mib-2 15 }

        bgpVersion OBJECT-TYPE
            SYNTAX     OCTET STRING (SIZE (1..255))
            MAX-ACCESS read-only
            STATUS     current
            DESCRIPTION
                    "Vector of supported BGP protocol version
                    numbers.  Each peer negotiates the version
                    from this vector.  Versions are identified
                    via the string of bits contained within this
                    object.  The first octet contains bits 0 to
                    7, the second octet contains bits 8 to 15,
                    and so on, with the most significant bit
                    referring to the lowest bit number in the
                    octet (e.g., the MSB of the first octet
                    refers to bit 0).  If a bit, i, is present
                    and set, then the version (i+1) of the BGP
                    is supported."
            ::= { bgp 1 }

        bgpLocalAs OBJECT-TYPE
            SYNTAX     INTEGER (0..65535)
            MAX-ACCESS read-only
            STATUS     current
            DESCRIPTION
                    "The local autonomous system number."
            ::= { bgp 2 }



        -- BGP Peer table.  This table contains, one entry per BGP
        -- peer, information about the BGP peer.

        bgpPeerTable OBJECT-TYPE
            SYNTAX     SEQUENCE OF BgpPeerEntry
            MAX-ACCESS not-accessible
            STATUS     current
            DESCRIPTION
                    "BGP peer table.  This table contains,
                    one entry per BGP peer, information about the
                    connections with BGP peers."
            ::= { bgp 3 }

        bgpPeerEntry OBJECT-TYPE
            SYNTAX     BgpPeerEntry
            MAX-ACCESS not-accessible
            STATUS     current
            DESCRIPTION
                    "Entry containing information about the
                    connection with a BGP peer."
            INDEX { bgpPeerRemoteAddr }
            ::= { bgpPeerTable 1 }

        BgpPeerEntry ::= SEQUENCE {
                bgpPeerIdentifier
                    IpAddress,
                bgpPeerState
                    INTEGER,
                bgpPeerAdminStatus
                    INTEGER,
                bgpPeerNegotiatedVersion
                    Integer32,
                bgpPeerLocalAddr
                    IpAddress,
                bgpPeerLocalPort
                    INTEGER,
                bgpPeerRemoteAddr
                    IpAddress,
                bgpPeerRemotePort
                    INTEGER,
                bgpPeerRemoteAs
                    INTEGER,
                bgpPeerInUpdates
                    Counter32,
                bgpPeerOutUpdates
                    Counter32,
                bgpPeerInTotalMessages
                    Counter32,
                bgpPeerOutTotalMessages
                    Counter32,
                bgpPeerLastError
                    OCTET STRING,
                bgpPeerFsmEstablishedTransitions
                    Counter32,
                bgpPeerFsmEstablishedTime
                    Gauge32,
                bgpPeerConnectRetryInterval
                    INTEGER,
                bgpPeerHoldTime
                    INTEGER,
                bgpPeerKeepAlive
                    INTEGER,
                bgpPeerHoldTimeConfigured
                    INTEGER,
                bgpPeerKeepAliveConfigured
                    INTEGER,
                bgpPeerMinASOriginationInterval
                    INTEGER,
                bgpPeerMinRouteAdvertisementInterval
                    INTEGER,
                bgpPeerInUpdateElapsedTime
                    Gauge32
                }

        bgpPeerIdentifier OBJECT-TYPE
            SYNTAX     IpAddress
            MAX-ACCESS read-only
            STATUS     current
            DESCRIPTION
                    "The BGP Identifier of this entry's BGP peer."
            ::= { bgpPeerEntry 1 }

        bgpPeerState OBJECT-TYPE
            SYNTAX     INTEGER {
                                idle(1),
                                connect(2),
                                active(3),
                                opensent(4),
                                openconfirm(5),
                                established(6)
                       }
            MAX-ACCESS read-only
            STATUS     current
            DESCRIPTION
                    "The BGP peer connection state."
            ::= { bgpPeerEntry 2 }

        bgpPeerAdminStatus OBJECT-TYPE
            SYNTAX     INTEGER {
                                stop(1),
                                start(2)
                       }
            MAX-ACCESS read-write
            STATUS     current
            DESCRIPTION
                    "The desired state of the BGP connection.  A
                    transition from 'stop' to 'start' will cause
                    the BGP Start Event to be generated.  A
                    transition from 'start' to 'stop' will cause
                    the BGP Stop Event to be generated.  This
                    parameter can be used to restart BGP peer
                    connections.  Care should be used in providing
                    write access to this object without adequate
                    authentication."
            ::= { bgpPeerEntry 3 }

        bgpPeerNegotiatedVersion OBJECT-TYPE
            SYNTAX     Integer32
            MAX-ACCESS read-only
            STATUS     current
            DESCRIPTION
                    "The negotiated version of BGP running between
                    the two peers."
            ::= { bgpPeerEntry 4 }

        bgpPeerLocalAddr OBJECT-TYPE
            SYNTAX     IpAddress
            MAX-ACCESS read-only
            STATUS     current
            DESCRIPTION
                    "The local IP address of this entry's BGP
                    connection."
            ::= { bgpPeerEntry 5 }

        bgpPeerLocalPort OBJECT-TYPE
            SYNTAX     INTEGER (0..65535)
            MAX-ACCESS read-only
            STATUS     current
            DESCRIPTION
                    "The local port for the TCP connection between
                    the BGP peers."
            ::= { bgpPeerEntry 6 }

        bgpPeerRemoteAddr OBJECT-TYPE
            SYNTAX     IpAddress
            MAX-ACCESS read-only
            STATUS     current
            DESCRIPTION
                    "The remote IP address of this entry's BGP
                    peer."
            ::= { bgpPeerEntry 7 }

        bgpPeerRemotePort OBJECT-TYPE
            SYNTAX     INTEGER (0..65535)
            MAX-ACCESS read-only
            STATUS     current
            DESCRIPTION
                    "The remote port for the TCP connection between
                    the BGP peers.  Note that the objects
                    bgpPeerLocalAddr, bgpPeerLocalPort,
                    bgpPeerRemoteAddr and bgpPeerRemotePort
                    provide the appropriate reference to the
                    standard MIB TCP connection table."
            ::= { bgpPeerEntry 8 }

        bgpPeerRemoteAs OBJECT-TYPE
            SYNTAX     INTEGER (0..65535)
            MAX-ACCESS read-only
            STATUS     current
            DESCRIPTION
                    "The remote autonomous system number."
            ::= { bgpPeerEntry 9 }

        bgpPeerInUpdates OBJECT-TYPE
            SYNTAX     Counter32
            MAX-ACCESS read-only
            STATUS     current
            DESCRIPTION
                    "The number of BGP UPDATE messages received on
                    this connection.  This object should be
                    initialized to zero (0) when the connection is
                    established."
            ::= { bgpPeerEntry 10 }

        bgpPeerOutUpdates OBJECT-TYPE
            SYNTAX     Counter32
            MAX-ACCESS read-only
            STATUS     current
            DESCRIPTION
                    "The number of BGP UPDATE messages transmitted
                    on this connection.  This object should be
                    initialized to zero (0) when the connection is
                    established."
            ::= { bgpPeerEntry 11 }

        bgpPeerInTotalMessages OBJECT-TYPE
            SYNTAX     Counter32
            MAX-ACCESS read-only
            STATUS     current
            DESCRIPTION
                    "The total number of messages received from the
                    remote peer on this connection.  This object
                    should be initialized to zero when the
                    connection is established."
            ::= { bgpPeerEntry 12 }

        bgpPeerOutTotalMessages OBJECT-TYPE
            SYNTAX     Counter32
            MAX-ACCESS read-only
            STATUS     current
            DESCRIPTION
                    "The total number of messages transmitted to
                    the remote peer on this connection.  This object
                    should be initialized to zero when the
                    connection is established."
            ::= { bgpPeerEntry 13 }

        bgpPeerLastError OBJECT-TYPE
            SYNTAX     OCTET STRING (SIZE (2))
            MAX-ACCESS read-only
            STATUS     current
            DESCRIPTION
                    "The last error code and subcode seen by this
                    peer on this connection.  If no error has
                    occurred, this field is zero.  Otherwise, the
                    first byte of this two byte OCTET STRING
                    contains the error code, and the second byte
                    contains the subcode."
            ::= { bgpPeerEntry 14 }

        bgpPeerFsmEstablishedTransitions OBJECT-TYPE
            SYNTAX     Counter32
            MAX-ACCESS read-only
            STATUS     current
            DESCRIPTION
                    "The total number of times the BGP FSM
                    transitioned into the established state."