⭐ 欢迎来到虫虫下载站! | 📦 资源下载 📁 资源专辑 ℹ️ 关于我们
⭐ 虫虫下载站

📄 parse-gram.c

📁 bison 2.0 主要可以用来做语法分析用的
💻 C
📖 第 1 页 / 共 4 页
字号:
#endif#endif{  /* The look-ahead symbol.  */int yychar;/* The semantic value of the look-ahead symbol.  */YYSTYPE yylval;/* Number of syntax errors so far.  */int yynerrs;/* Location data for the look-ahead symbol.  */YYLTYPE yylloc;  register int yystate;  register int yyn;  int yyresult;  /* Number of tokens to shift before error messages enabled.  */  int yyerrstatus;  /* Look-ahead token as an internal (translated) token number.  */  int yytoken = 0;  /* Three stacks and their tools:     `yyss': related to states,     `yyvs': related to semantic values,     `yyls': related to locations.     Refer to the stacks thru separate pointers, to allow yyoverflow     to reallocate them elsewhere.  */  /* The state stack.  */  short int yyssa[YYINITDEPTH];  short int *yyss = yyssa;  register short int *yyssp;  /* The semantic value stack.  */  YYSTYPE yyvsa[YYINITDEPTH];  YYSTYPE *yyvs = yyvsa;  register YYSTYPE *yyvsp;  /* The location stack.  */  YYLTYPE yylsa[YYINITDEPTH];  YYLTYPE *yyls = yylsa;  YYLTYPE *yylsp;  /* The locations where the error started and ended. */  YYLTYPE yyerror_range[2];#define YYPOPSTACK   (yyvsp--, yyssp--, yylsp--)  YYSIZE_T yystacksize = YYINITDEPTH;  /* The variables used to return semantic value and location from the     action routines.  */  YYSTYPE yyval;  YYLTYPE yyloc;  /* When reducing, the number of symbols on the RHS of the reduced     rule.  */  int yylen;  YYDPRINTF ((stderr, "Starting parse\n"));  yystate = 0;  yyerrstatus = 0;  yynerrs = 0;  yychar = YYEMPTY;		/* Cause a token to be read.  */  /* Initialize stack pointers.     Waste one element of value and location stack     so that they stay on the same level as the state stack.     The wasted elements are never initialized.  */  yyssp = yyss;  yyvsp = yyvs;  yylsp = yyls;#if YYLTYPE_IS_TRIVIAL  /* Initialize the default location before parsing starts.  */  yylloc.first_line   = yylloc.last_line   = 1;  yylloc.first_column = yylloc.last_column = 0;#endif  /* User initialization code. */  #line 71 "parse-gram.y"{  /* Bison's grammar can initial empty locations, hence a default     location is needed. */  yylloc.start.file   = yylloc.end.file   = current_file;  yylloc.start.line   = yylloc.end.line   = 1;  yylloc.start.column = yylloc.end.column = 0;}/* Line 842 of yacc.c.  */#line 1152 "parse-gram.c"  yyvsp[0] = yylval;    yylsp[0] = yylloc;  goto yysetstate;/*------------------------------------------------------------.| yynewstate -- Push a new state, which is found in yystate.  |`------------------------------------------------------------*/ yynewstate:  /* In all cases, when you get here, the value and location stacks     have just been pushed. so pushing a state here evens the stacks.     */  yyssp++; yysetstate:  *yyssp = yystate;  if (yyss + yystacksize - 1 <= yyssp)    {      /* Get the current used size of the three stacks, in elements.  */      YYSIZE_T yysize = yyssp - yyss + 1;#ifdef yyoverflow      {	/* Give user a chance to reallocate the stack. Use copies of	   these so that the &'s don't force the real ones into	   memory.  */	YYSTYPE *yyvs1 = yyvs;	short int *yyss1 = yyss;	YYLTYPE *yyls1 = yyls;	/* Each stack pointer address is followed by the size of the	   data in use in that stack, in bytes.  This used to be a	   conditional around just the two extra args, but that might	   be undefined if yyoverflow is a macro.  */	yyoverflow ("parser stack overflow",		    &yyss1, yysize * sizeof (*yyssp),		    &yyvs1, yysize * sizeof (*yyvsp),		    &yyls1, yysize * sizeof (*yylsp),		    &yystacksize);	yyls = yyls1;	yyss = yyss1;	yyvs = yyvs1;      }#else /* no yyoverflow */# ifndef YYSTACK_RELOCATE      goto yyoverflowlab;# else      /* Extend the stack our own way.  */      if (YYMAXDEPTH <= yystacksize)	goto yyoverflowlab;      yystacksize *= 2;      if (YYMAXDEPTH < yystacksize)	yystacksize = YYMAXDEPTH;      {	short int *yyss1 = yyss;	union yyalloc *yyptr =	  (union yyalloc *) YYSTACK_ALLOC (YYSTACK_BYTES (yystacksize));	if (! yyptr)	  goto yyoverflowlab;	YYSTACK_RELOCATE (yyss);	YYSTACK_RELOCATE (yyvs);	YYSTACK_RELOCATE (yyls);#  undef YYSTACK_RELOCATE	if (yyss1 != yyssa)	  YYSTACK_FREE (yyss1);      }# endif#endif /* no yyoverflow */      yyssp = yyss + yysize - 1;      yyvsp = yyvs + yysize - 1;      yylsp = yyls + yysize - 1;      YYDPRINTF ((stderr, "Stack size increased to %lu\n",		  (unsigned long int) yystacksize));      if (yyss + yystacksize - 1 <= yyssp)	YYABORT;    }  YYDPRINTF ((stderr, "Entering state %d\n", yystate));  goto yybackup;/*-----------.| yybackup.  |`-----------*/yybackup:/* Do appropriate processing given the current state.  *//* Read a look-ahead token if we need one and don't already have one.  *//* yyresume: */  /* First try to decide what to do without reference to look-ahead token.  */  yyn = yypact[yystate];  if (yyn == YYPACT_NINF)    goto yydefault;  /* Not known => get a look-ahead token if don't already have one.  */  /* YYCHAR is either YYEMPTY or YYEOF or a valid look-ahead symbol.  */  if (yychar == YYEMPTY)    {      YYDPRINTF ((stderr, "Reading a token: "));      yychar = YYLEX;    }  if (yychar <= YYEOF)    {      yychar = yytoken = YYEOF;      YYDPRINTF ((stderr, "Now at end of input.\n"));    }  else    {      yytoken = YYTRANSLATE (yychar);      YY_SYMBOL_PRINT ("Next token is", yytoken, &yylval, &yylloc);    }  /* If the proper action on seeing token YYTOKEN is to reduce or to     detect an error, take that action.  */  yyn += yytoken;  if (yyn < 0 || YYLAST < yyn || yycheck[yyn] != yytoken)    goto yydefault;  yyn = yytable[yyn];  if (yyn <= 0)    {      if (yyn == 0 || yyn == YYTABLE_NINF)	goto yyerrlab;      yyn = -yyn;      goto yyreduce;    }  if (yyn == YYFINAL)    YYACCEPT;  /* Shift the look-ahead token.  */  YY_SYMBOL_PRINT ("Shifting", yytoken, &yylval, &yylloc);  /* Discard the token being shifted unless it is eof.  */  if (yychar != YYEOF)    yychar = YYEMPTY;  *++yyvsp = yylval;  *++yylsp = yylloc;  /* Count tokens shifted since error; after three, turn off error     status.  */  if (yyerrstatus)    yyerrstatus--;  yystate = yyn;  goto yynewstate;/*-----------------------------------------------------------.| yydefault -- do the default action for the current state.  |`-----------------------------------------------------------*/yydefault:  yyn = yydefact[yystate];  if (yyn == 0)    goto yyerrlab;  goto yyreduce;/*-----------------------------.| yyreduce -- Do a reduction.  |`-----------------------------*/yyreduce:  /* yyn is the number of a rule to reduce with.  */  yylen = yyr2[yyn];  /* If YYLEN is nonzero, implement the default value of the action:     `$$ = $1'.     Otherwise, the following line sets YYVAL to garbage.     This behavior is undocumented and Bison     users should not rely upon it.  Assigning to YYVAL     unconditionally makes the parser a bit smaller, and it avoids a     GCC warning that YYVAL may be used uninitialized.  */  yyval = yyvsp[1-yylen];  /* Default location. */  YYLLOC_DEFAULT (yyloc, yylsp - yylen, yylen);  YY_REDUCE_PRINT (yyn);  switch (yyn)    {        case 6:#line 189 "parse-gram.y"    { prologue_augment ((yyvsp[0].chars), (yylsp[0])); }    break;  case 7:#line 190 "parse-gram.y"    { debug_flag = true; }    break;  case 8:#line 191 "parse-gram.y"    { muscle_insert ((yyvsp[-1].chars), (yyvsp[0].chars)); }    break;  case 9:#line 192 "parse-gram.y"    { defines_flag = true; }    break;  case 10:#line 193 "parse-gram.y"    { error_verbose = true; }    break;  case 11:#line 194 "parse-gram.y"    { expected_sr_conflicts = (yyvsp[0].integer); }    break;  case 12:#line 195 "parse-gram.y"    { expected_rr_conflicts = (yyvsp[0].integer); }    break;  case 13:#line 196 "parse-gram.y"    { spec_file_prefix = (yyvsp[0].chars); }    break;  case 14:#line 198 "parse-gram.y"    {    nondeterministic_parser = true;    glr_parser = true;  }    break;  case 15:#line 203 "parse-gram.y"    {    muscle_code_grow ("initial_action", (yyvsp[0].chars), (yylsp[0]));  }    break;  case 16:#line 206 "parse-gram.y"    { add_param ("lex_param", (yyvsp[0].chars), (yylsp[0])); }    break;  case 17:#line 207 "parse-gram.y"    { locations_flag = true; }    break;  case 18:#line 208 "parse-gram.y"    { spec_name_prefix = (yyvsp[0].chars); }    break;  case 19:#line 209 "parse-gram.y"    { no_lines_flag = true; }    break;  case 20:#line 210 "parse-gram.y"    { nondeterministic_parser = true; }    break;  case 21:#line 211 "parse-gram.y"    { spec_outfile = (yyvsp[0].chars); }    break;  case 22:#line 212 "parse-gram.y"    { add_param ("parse_param", (yyvsp[0].chars), (yylsp[0])); }    break;  case 23:#line 213 "parse-gram.y"    { pure_parser = true; }    break;  case 24:#line 214 "parse-gram.y"    { skeleton = (yyvsp[0].chars); }    break;  case 25:#line 215 "parse-gram.y"    { token_table_flag = true; }    break;  case 26:#line 216 "parse-gram.y"    { report_flag = report_states; }    break;  case 27:#line 217 "parse-gram.y"    { yacc_flag = true; }    break;  case 31:#line 225 "parse-gram.y"    {      grammar_start_symbol_set ((yyvsp[0].symbol), (yylsp[0]));    }    break;  case 32:#line 229 "parse-gram.y"    {      typed = true;      MUSCLE_INSERT_INT ("stype_line", (yylsp[0]).start.line);      muscle_insert ("stype", (yyvsp[0].chars));    }    break;  case 33:#line 235 "parse-gram.y"    {      symbol_list *list;      for (list = (yyvsp[0].list); list; list = list->next)	symbol_destructor_set (list->sym, (yyvsp[-1].chars), (yylsp[-1]));      symbol_list_free ((yyvsp[0].list));    }    break;  case 34:#line 242 "parse-gram.y"    {      symbol_list *list;      for (list = (yyvsp[0].list); list; list = list->next)	symbol_printer_set (list->sym, (yyvsp[-1].chars), list->location);      symbol_list_free ((yyvsp[0].list));    }    break;  case 35:#line 249 "parse-gram.y"    {      default_prec = true;    }    break;  case 36:#line 253 "parse-gram.y"    {      default_prec = false;    }    break;  case 37:#line 259 "parse-gram.y"    { current_class = nterm_sym; }    break;  case 38:#line 260 "parse-gram.y"    {      current_class = unknown_sym;      current_type = NULL;    }    break;  case 39:#line 264 "parse-gram.y"    { current_class = token_sym; }    break;  case 40:#line 265 "parse-gram.y"    {      current_class = unknown_sym;      current_type = NULL;    }    break;  case 41:#line 270 "parse-gram.y"    {      symbol_list *list;      for (list = (yyvsp[0].list); list; list = list->next)	symbol_type_set (list->sym, (yyvsp[-1].uniqstr), (yylsp[-1]));      symbol_list_free ((yyvsp[0].list));    }    break;  case 42:#line 280 "parse-gram.y"    {      symbol_list *list;      ++current_prec;      for (list = (yyvsp[0].list); list; list = list->next)	{	  symbol_type_set (list->sym, current_type, (yylsp[-1]));	  symbol_precedence_set (list->sym, current_prec, (yyvsp[-2].assoc), (yylsp[-2]));	}      symbol_list_free ((yyvsp[0].list));      current_type = NULL;    }    break;  case 43:#line 294 "parse-gram.y"    { (yyval.assoc) = left_assoc; }    break;  case 44:#line 295 "parse-gram.y"    { (yyval.assoc) = right_assoc; }    break;  case 45:#line 296 "parse-gram.y"    { (yyval.assoc) = non_assoc; }    break;  case 46:#line 300 "parse-gram.y"    { current_type = NULL; }    break;  case 47:#line 301 "parse-gram.y"    { current_type = (yyvsp[0].uniqstr); }    break;  case 48:#line 307 "parse-gram.y"    { (yyval.list) = symbol_list_new ((yyvsp[0].symbol), (yylsp[0])); }    break;  case 49:

⌨️ 快捷键说明

复制代码 Ctrl + C
搜索代码 Ctrl + F
全屏模式 F11
切换主题 Ctrl + Shift + D
显示快捷键 ?
增大字号 Ctrl + =
减小字号 Ctrl + -