cat-id-tbl.c

一套客户/服务器模式的备份系统代码,跨平台,支持linux,AIX, IRIX, FreeBSD, Digital Unix (OSF1), Solaris and HP-UX.

Assuming daemon startup is desired.\n", 767},
  {"\
Warning: Cannot resolve service name `%s' to port number, using default port \
%d.\n", 768},
  {"\
Warning: Cannot resolve service name `%s' to port number, using default \
service `%s'.\n", 769},
  {"Error: Could not find program file of `%s'\n", 770},
  {"Warning: Error reading configuration file `%s'.\n", 771},
  {"<none found>", 772},
  {"Warning: cannot fork, continuing to run in foreground.\n", 773},
  {"Error: Could not separate path of `%s'\n", 774},
  {"Warning: Service unexpectedly terminated.\n", 775},
  {"Warning: Cannot send command %d (%c) to slave server.\n", 776},
  {"\
Warning: Did not get success response for command %d (%c) from slave \
server.\n", 777},
  {"Error: Cannot run command `%s' to read output.\n", 778},
  {"Error: cannot open file `%s'.\n", 779},
  {"\
Error: File `%s' changed size while reading, trailing bytes not saved.\n", 780},
  {"Error: Unexpected fault reading `%s'.\n", 781},
  {"Warning: CRC32 checksumming not available (requires zlib).\n", 782},
  {"Error: cannot lstat `%s'.\n", 783},
  {"Error: cannot read symlink `%s'.\n", 784},
  {"Error: cannot stat `%s'.\n", 785},
  {"Error: cannot read directory `%s'.\n", 786},
  {"Error: Fault during read of compressed file `%s'.\n", 787},
  {"Error: Compression program returned bad status %d for `%s'.\n", 788},
  {"Error: `%s' is an illegal type of file.\n", 789},
  {"Error: Unexpected error reading contents of `%s'.\n", 790},
  {"General error", 791},
  {"Error writing packed data stream", 792},
  {"Error reading data while packing", 793},
  {"Error reading symbolic link while packing", 794},
  {"Error compressing data while packing", 795},
  {"Unknown filesystem entry type found while packing", 796},
  {"Size of file changed while packing it", 797},
  {"Error reading command output while packing", 798},
  {"Error while packing ACLs", 799},
  {"Given filesystem entry not found while packing", 800},
  {"Required built-in uncompress not available", 801},
  {"Error uncompressing data during extract", 802},
  {"Error reading packed data stream during extract", 803},
  {"Format error in packed data stream", 804},
  {"Error creating base directory during extract", 805},
  {"Error setting filesystem entry properties", 806},
  {"Error creating filesystem entry during extract", 807},
  {"Error setting ACLs during extract", 808},
  {"Filesystem entry already exists, must not remove", 809},
  {"Error writing data to file during extract", 810},
  {"Error writing data to command input", 811},
  {"File to write contents to does not exist", 812},
  {"Wrong checksum reading packed data stream", 813},
  {"No writing permission", 814},
  {"Interrupted, going to exit.\n", 815},
  {"Exiting with bad status %d, most recent system error: %s\n", 816},
  {"Internal error evaluating default tape device string", 817},
  {"Warning: program `%s' not found.\n", 818},
  {"\
Warning: Both old parameter LastCartridges and new CartridgeSets supplied. \
Ignoring LastCartridges entry.\n", 819},
  {"Error: Cartridge sets %d and %d have common cartridges.\n", 820},
  {"Warning: Unrecognized parameter in streamer buffer configuration.", 821},
  {"\
Warning: Maximum filesize must be at least one tape block. Reset to %d.\n", 822},
  {"Warning: (MaxBytesPerTape): Entry not recognized, ignored.\n", 823},
  {"\
Warning: (MaxBytesPerTape): First cartridge number too low, starting with \
1.\n", 824},
  {"\
Warning: (MaxBytesPerTape): First cartridge number too high, stopping at \
%d.\n", 825},
  {"\
Warning: No tape-state file found. Assuming initial startup with first \
cartridge in set.\n", 826},
  {"Error: Status file `%s' cannot be removed. Status report disabled.\n", 827},
  {"Error: Status file `%s' cannot be written. Status report disabled.\n", 828},
  {"Error: Command %d ('%c') failed (%s)\n", 829},
  {"%s, Protocol Error: %s\n", 830},
  {"Command Error: %s.\n", 831},
  {"\
Warning: Cartridge %d is not in any cartridge set. Assuming current set %d\n", 832},
  {"\
Error: Unable to determine, whether client has access. Most recent system \
error: %s\n", 833},
  {"Warning: Client %s tried to access cartridge set %d, denied.\n", 834},
  {"\
Warning: Could not replace %-mark in change cartridge command, leaving it \
unmodified.\n", 835},
  {"You are requested to check the device for possible\n", 836},
  {"Warning: Device access timed out.\n", 837},
  {"Warning: Device command timed out.\n", 838},
  {"\
Warning: Cannot remove filesystem entry to check preferred service for \
client, that is not a regular file !!!\n", 839},
  {"Warning: Cannot open file to check preferred service for client.\n", 840},
  {"Waiting for device %s to become available.\n", 841},
  {"The backup service on host %s is in use.\n", 842},
  {"You are requested to check the service for possible\n", 843},
  {"Error: Unable to ask user %s to check service availability.\n", 844},
  {"Warning: Service access timed out.\n", 845},
  {"Device %s available, idle.\n", 846},
  {"Device %s reopening for write.\n", 847},
  {"Internal Error: tape not open for writing in reopen.\n", 848},
  {"Error: Cannot change store file.\n", 849},
  {"Error: Cannot open tape once again for writing.\n", 850},
  {"Device %s opened for writing to cartridge %d, file %d.\n", 851},
  {"Current cartridge no. %d is already full\n", 852},
  {"Error: Cannot reopen device for writing.\n", 853},
  {"Device %s is writing with %d KB/s to cartridge %d, file %d.\n", 854},
  {"Error: Cannot get tape status after write failure.\n", 855},
  {"Error: Repeated faults writing to tape, now: %s.\n", 856},
  {"Warning: A media error occured (%d), trying to reposition and reopen.\n", 857},
  {"Error: Writing to tape: %s.\n", 858},
  {"\
Warning: An unexpected error (%d) occured, changing cartridge. Proceeding \
with fingers crossed.\n", 859},
  {"\
Warning: Reopen failed (%d), changing cartridge. Proceeding with fingers \
crossed.\n", 860},
  {"Error: Cannot find a new cartridge for writing.\n", 861},
  {"Error: Cannot change to cartridge %d for writing.\n", 862},
  {"Error: Cannot move to file %d for writing.\n", 863},
  {"\
Internal Error: Wrong tape %d accepted in drive for %d, please report.\n", 864},
  {"\
Internal Error: Wrong file number %d set instead of %d, please report.\n", 865},
  {"Warning: Cannot erase tape.\n", 866},
  {"Internal Error: Wrong tape for writing in drive, please report.\n", 867},
  {"Error: Cannot write label to tape.\n", 868},
  {"Error: Cannot change to file %d for writing.\n", 869},
  {"Device %s is reading with %d KB/s from cartridge %d, file %d.\n", 870},
  {"Error: %s, only %d bytes read, trying to continue, tapefd = %d.\n", 871},
  {"Warning: A media error occurred (%d), trying to move to next file.\n", 872},
  {"Error: Cannot change to cartridge %d for reading.\n", 873},
  {"Error: Cannot change to file %d for reading.\n", 874},
  {"Saved tapepos: %ld.%ld (cartset %ld) writepos at %ld.%ld\n", 875},
  {"%s, Error: Cannot write file %s to save the tape state.\n", 876},
  {"\
Warning: tape-state file found, but no entry for device `%s'. Assuming \
current position as cartridge %d, file %d.\n", 877},
  {"\
Warning: Current position entry for device `%s' incomplete in tape-state \
file. Assuming current position as cartridge %d, file %d.\n", 878},
  {"\
Warning: Insert cartridge %d for set %d not in this set. Trying to \
reorganize.\n", 879},
  {"\
Warning: Could not find start cartridge for set %d. Starting with cartridge \
%d, file 1.\n", 880},
  {"%s, Error: Cannot read file %s to get the number of bytes on tape.\n", 881},
  {"%s, Error: Cannot write file %s to save the number of bytes on tape.\n", 882},
  {"Warning: Command to run when tape full returned status %d.\n", 883},
  {"Error: Failed to run command to run when tape full.\n", 884},
  {"Warning: Could not register tape usage increment.\n", 885},
  {"Warning: Trailing garbage ignored in message `%s'.\n", 886},
  {"Error: Cannot write file `%s' to save the precious tapes", 887},
  {"Error unlinking file `%s': %s\n", 888},
  {"Warning: Removing client `%s' from `%s' failed.\n", 889},
  {"Got Message (unrecognized): %s\n", 890},
  {"\
Usage: %s [ -sSbD ] [ <configuration-file> ] [ -l <logging-file> ] [ -L \
<locale> ]\n", 891},
  {"\
Error: This program must be started by the inetd. See the documentation for \
details.\n", 892},
  {"\
Error: Long int is wider than 4 Bytes. Inform author about machine type.\n", 893},
  {"Warning: Could not find program file of `%s'\n", 894},
  {"Warning: Setting TCP/IP throughput failed with %d.\n", 895},
  {"Warning: Setting Keepalive failed with %d\n", 896},
  {"Warning: setsockopt (SO_LINGER): %d", 897},
  {"\
Warning: Could not replace %%p in init command, leaving it unmodified.\n", 898},
  {"Warning: Executing init command %s returned exit status %d.\n", 899},
  {"Error: Authentication failed for host %s. Exiting.\n", 900},
  {"skipping possibly destructive commands while in trouble", 901},
  {"writing to tape failed.", 902},
  {"reading from tape failed.", 903},
  {"sending number of valid transferred bytes failed.", 904},
  {"setting number of valid bytes to transfer failed.", 905},
  {"getting the tape position failed.", 906},
  {"getting the tape write position failed.", 907},
  {"getting the tape read position failed.", 908},
  {"requesting new cartridge for writing", 909},
  {"determining the number of cartridges failed.", 910},
  {"checking for service ability failed.", 911},
  {"getting the current cartridge set failed.", 912},
  {"getting the tape blocksize set failed.", 913},
  {"getting the written tapes failed.", 914},
  {"getting the client's tapes failed.", 915},
  {"no argument to command %d", 916},
  {"cannot set cartridge", 917},
  {"cannot set file", 918},
  {"cannot skip over files", 919},
  {"cannot set cartridge set", 920},
  {"not allowed during device access", 921},
  {"cannot open device for writing", 922},
  {"cannot open device for reading", 923},
  {"cannot close device", 924},
  {"cannot erase tape", 925},
  {"running a backup as client failed.", 926},
  {"getting client identity failed.", 927},
  {"getting user identity failed.", 928},
  {"sending server identity failed.", 929},
  {"evaluating client message failed.", 930},
  {"cannot change communication buffer size", 931},
  {"cannot check access restrictions", 932},
  {"proofing authenticaton failed.", 933},
  {"unknown command: %d", 934},
  {"Device %s is labeling cartridge %d.\n", 935},
  {"<labeled automatically>", 936},
  {"Device %s is idle.\n", 937},
  {"Device %s is reading the cartridge label.\n", 938},
  {"Found cartridge number %d (secondary %d)\n", 939},
  {"Device %s is closing.\n", 940},
  {"Error: File numbers for writing inconsistent.\n", 941},
  {"Device %s is closed, idle.\n", 942},
  {"Error: Cannot write file `%s' to store the cartridge order.\n", 943},
  {"\
Error: Cannot start program to notify administrator: No more writable tapes", 944},
  {"\
Hello,\n\
\n\
There are no more free tapes available.\n", 945},
  {"All tapes are either crucial for a client to restore\n", 946},
  {"all needed data, or is set read-only.\n", 947},
  {"\
\n\
These are the tapes written during the current session:\n\
\n", 948},
  {"\
\n\
These are the read-only tapes:\n\
\n", 949},
  {"\
\n\
These are the clients and the tapes they need:\n\
\n", 950},
  {"Client identifier", 951},
  {"Needed cartridges", 952},
  {"\
\n\
Please do one of the follo