oalefdefmsgs.eng

openaccess读def,lef文件所用的源代码

// *****************************************************************************
// *****************************************************************************
// oaLefDefMsgs.eng
//
// This files contains the English messages used by Lef/Def exceptions.
// Note that the message text defined in this file must match the message
// identifiers declared in the file oaLefDefMsgs.h.
//
// *****************************************************************************
// Except as specified in the OpenAccess terms of use of Cadence or Silicon
// Integration Initiative, this material may not be copied, modified,
// re-published, uploaded, executed, or distributed in any way, in any medium,
// in whole or in part, without prior written permission from Cadence.
//
//                Copyright 2002-2005 Cadence Design Systems, Inc.
//                           All Rights Reserved.
//
//  $Author: nitters $
//  $Revision: 1.37 $
//  $Date: 2005/07/29 13:42:23 $
//  $State: Exp $
// *****************************************************************************
// *****************************************************************************



BEGIN_LEFDEF_NAMESPACE



// *****************************************************************************
// Messages
// *****************************************************************************
const oaString	LefDefMsgs[] = {
    "Failed to initialize CAT parser.",
    "Parse Error.",
    "%s",
    
    "A library was not specified.",
    "A cell was not specified.",
    "A view was not specified.",
    "A technology library not specified.",
        
    "Cannot open file %s.",
    "The library %s was not found.",
    "A technology database was not found in library %s.",
    "The constraint group %s was not found in the technology database.",
    
    "A zero sized rectangle is not supported, and will be ignored.",
    "PROPERTY %s: This is property name was not defined, and will be ignored.",

    "NAMECASESENSITIVE OFF: This is not supported. Translation will be case sensitive.",
    "BUSBITCHARS \"%s\": These are not valid bus characters, and will be ignored.",
    "DIVIDERCHAR \"%s\": This is not a valid character, and will be ignored.",
    "UNITS DATABASE %d: This is not a supported value. The default value of 100 will be used.",
    "UNITS DATABASE %d: The value is different from the technology value %d. The technology value will be used.",
    "UNITS DATABASE %d: The value is different from the technology value %d. The data will be scaled to the technology value. This can cause loss of precision.",
    
    "ANTENNAINPUTGATEAREA %g: The value cannot be negative.",
    "ANTENNAOUTPUTDIFFAREA %g: The value cannot be negative.",
    "ANTENNAINOUTDIFFAREA %g: The value cannot be negative.",
    "INPUTPINANTENNASIZE %g: The value cannot be negative.",
    "OUTPUTPINANTENNASIZE %g: The value cannot be positive.",
    "INOUTPINANTENNASIZE %g: The value cannot be positive.",

    "The layer %s was not found.",
    "The terminal %s was not found.",
    "The instance %s was not found.",
    "The terminal %s on instance %s was not found.",
    
    "SPACING %s %s: Inter-layer spacing rule can only be specified for cut layers.",
    
    "LAYER %s: An overlap layer already exists with the name %s. This new definition has been ignored.",
    "LAYER %s: The layer type %s is not supported. This layer has been ignored.",
    "LAYER %s: The DENSITY attribute does not have a completely specified table of values. This attribute has been ignored",
    "LAYER %s: The ACCURRENDENSITY attribute does not have a completely specified table of values. This attribute has been ignored.",
    "LAYER %s: The MINIMUMCUT attribute has redundant values for numCuts:%d and width:%.11g. This attribute has been ignored.",
    
    "NONDEFAULTRULE %s: A rule with this name already exists. This new definition has been ignored.",
    "NONDEFAULTRULE %s: The layer %s is not a routing layer. This layer has been ignored.",
    "NONDEFAULTRULE %s: The via %s was not found. This via has been ignored.",
    "NONDEFAULTRULE %s: The via rule %s was not found. This via rule has been ignored.",
    
    "VIA %s: A via with the same name but different geometry already exists. This new definition has been ignored.",
    "VIA %s: The via uses more than three layers. This via has been ignored.",
    "VIA %s: The via has fewer than three layers. This via has been ignored",
    "VIA %s: The via contains a non-rectangular shape. This via has been ignored.",
    "VIA %s: A matching via rule cannot be found. This via has been ignored.",
    "VIA %s: The via contains multiple cut layers. This via has been ignored.",
    "VIA %s: The via has no cut layer defined. This via has been ignored.",
    "VIA %s: The via is missing top or bottom routing layers. This via has been ignored.",
    "VIA %s: There was an error in the cut pattern definition. This via has been ignored.",
    "VIA %s: The via has no geometries defined. This via has been ignored.",
    "VIA %s: The master design for this via was not found. This via has been ignored.",
    "VIA %s: The via definition is not bound. This via has been ignored.",
    "VIA %s: A custom via was created for this via.",

    "VIARULE %s: The via rule has no cut layer defined. This rule has been ignored.",
    "VIARULE %s: The via %s was not found. This via has been ignored.",
    "VIARULE %s: The layers of via %s do not match the via rule. This via has been ignored.",
    
    "SITE %s: The referenced site %s was not found.",
    
    "MACRO %s: The macro is missing the SIZE attribute. This macro has been ignored.",
    "MACRO %s: The macro requires that the EEQ master cell %s be defined before macro use. This macro has been ignored.",
    "MACRO %s: The macro has non-continuous overlap shapes. This macro has been ignored.",
    "MACRO %s: The macro defines obstructions that already exist. This new definition has been ignored.",
    
    "PIN %s: This is not a legal name for a terminal. It should be a scalar or vector bit name. This pin has been ignored.",
    "PIN %s: The must-join terminal %s was not found. This attribute has been ignored.",
    "PIN %s: The routing rule %s was not found. This attribute has been ignored.",
    "PIN %s: The net expression %s is not valid. This attribute has been ignored.",
    "PIN %s: The default net %s in the net expression is not valid. This attribute has been ignored.",
    "PIN %s: A mix of 5.3 and 5.4 antenna syntax not allowed. The antenna information for this pin has been ignored.",
    "PIN %s: The antenna size cannot be positive. Only Input pin antenna size can be positive. This attribute has been ignored.",
    "PIN %s: The antenna metal area cannot be negative. This attribute has been ignored.",
    "PIN %s: The antenna metal length cannot be negative. This attribute has been ignored.",
    "PIN %s: There was no layer specified to map ANTENNAMETALLENGTH to 5.4 syntax. This attribute has been ignored.",
    "PIN %s: The thickness for layer %s was not found. This is necessary to map ANTENNAMETALLENGTH to 5.4 syntax. This attribute has been ignored.",
    "PIN %s: The antenna model %s is not supported. This attribute has been ignored.",
    "PIN %s: A terminal with a different net already exists. This new definition has been ignored.",
    "PIN %s: The block domain terminal was not found. This pin has been ignored.",
    "PIN %s: The terminal was not found in the existing design. This pin has been ignored.",
    "PIN %s: The connectivity could not be changed from %s to %s in update mode.",
    
    "No layer was defined for the geometry.",
    "The via %s was not found.",
        
    "GROUP %s: The region %s was not found. This region attribute has been ignored.",
    "GROUP %s: The instance %s was already assigned to group or region. It has not been added to this group.",
    "GROUP %s: A region with the same name already exists. This group was renamed to %s.",
    
    "COMPONENT %s: The master %s for this instance was not found. BBox and placement coordinates may not be correct.",
    "COMPONENT %s: The instance references its own design. This instance has been ignored.",
    "COMPONENT %s: The instance was not found in the existing design. This instance has been ignored.",
    "COMPONENT %s: This is not a legal name for an instance. This instance was ignored.",
    "COMPONENT %s: The weight %d is not a valid value. .",
    "COMPONENT %s: Invalid source %s.",
    "COMPONENT %s: Invalid EEQ %s (does not match master's EEQ).",
    "COMPONENT %s: Cannot find region %s.",
    
    "NET %s: This is not a legal name for a net. It should be a scalar or vector bit name. This net has been ignored.",
    "NET %s: The block domain net was not found. This net has been ignored.",
    "NET %s: The original net %s was not found. This attribute has been ignored.",
    "NET %s: The shield net %s was not found. This attribute has been ignored.",
    "NET %s: The routing rule %s was not found. This attribute has been ignored.",
    "NET %s: The via %s was not found. The routing for this net has been ignored.",
    "NET %s: The layers of via %s do not match the route segments. The routing for this net has been ignored.",
    "STYLE %d: The style number was not previously defined. This routing for this net has been ignored.",
    "NET %s: The net was not found in the existing design. This net has been ignored.",
    
    "ROW %s: The siteDef %s was not found. This row has been ignored.",
    "ROW %s: The row orientation could not be determined because both X and Y > 1. This row has been ignored.",
    "ROW %s: The row step cannot be smaller than Site size. This row has been ignored.",
    
    "SCANCHAIN %s: The output pin was not specified, and no COMMONSCANPIN was defined. This scan chain has been ignored.",
    "SCANCHAIN %s: The input pin was not specified, and no COMMONSCANPIN was defined. This scan chain has been ignored.",

    "PROPERTY %s: The value for this property was out of range. This property has been ignored.",
    
    "Cannot find cell '%s' in library '%s'.",
    "Cannot find view(s) '%s' for cell '%s' in library '%s'.",
    
    "LAYER %s: The routing direction for this layer was not supported. A HORIZONTAL routing direction has been assumed.",
    "MACRO %s: The FOREIGN container view for this design was not found: %s",
    "NET %s: The connection %s/%s was not found in existing design. This connection has been ignored."
};



END_LEFDEF_NAMESPACE