📄 smarfaxh.h
字号:
/**********************************************************************************
函数名:<_TapiSmartSendFax>
----------------------------
功能: 通过TAPI接口发送传真!
----------------------------
参数:
1: hFax 传真对象句柄
2: hCall 传真参数
3: hline 传真参数
4: FileName 传真文件名
5: Identifi 传真识别符(一般添入自己的传真号码)
6: Volume Modem应答音量( 0 | 1 | 2 | 3 )
7: Speed 传真需要的速度( 24 | 48 | 72 | 96 | 120 |144)
8: Class 传真类型(CLASS_1 | CLASS_2 | CLASS_1.0 | CLASS_2.0)
9: Is2d 压缩方式(U2D_ENABLE | U2D_DISABLE)
10: ECM 纠错方式(ECM_ENABLE | ECM_DISABLE )
11: CreateHead 建立传真页眉信息
12: Resolution 传真质量
13: From 发送者
14: To 接受者
15: hWnd 消息窗口句柄
16: Msg 消息ID (WM_SMARTFAX)
返回值:
0: End if function completes successfully
-1: Exception error
101: Failed to Open FAX file ~
102: Couldn't conneced within 35 secs of ATA command
103: Resevr
104: Failed to send CSI frames
105: Failed to send DIS frames
106: Failed to send NFS frames
107: Failed to send other negotiating frames
108: Failed to send CFR frames
109: Failed to training
110: Failed to send FTT frames
111: Failed to set training speed 3 times
112: Failed to send CRP frames
113: Failed to dropped carrier within 5 s
114: Failed to respond to +FRM properly
115: Failed to get modem data
116: Failed to accept page data
201: Couldn't be found transmit file
202: Transmit file isn't TIFF CLASS
203: Call isn't answered within 30 s
204: Machine can't receive fax data
205: Couldn't set +FTM
206: Couldn't set +FTM
210: NO DIALTONE
211: BUSY
212: NO ANSWER
213: NO CARRIER
************************************************************************************/
int _TapiSmartSendFax(SmartFaxObj *hFax ,HCALL &hCall,HLINE &hline,const char *Tel,const char *FileName,
const char *Identifi,EVolume Volume ,EFaxSpeed Speed,EClass Class,EUsed2D Is2d,
EErrorCorrect ECM,ECreateHead CreateHead,EResolution Resolution,
const char * From ,const char * Receiver,HWND hWnd,UINT Msg,int nStartPage);
/**********************************************************************************
函数名: <SmartReceiveFax>
----------------------------
功能: 直接通过端口接收传真
----------------------------
参数:
1: FaxParam 传真参数 (见SFaxParam定义)
************************************************************************************/
int SmartReceiveFax(SFaxParam *FaxParam);
/**********************************************************************************
函数名:<_SmartReceiveFax>
----------------------------
功能: 直接通过端口接收传真
----------------------------
参数:
1: hFax 传真对象句柄
2: nPort 端口号
3: FileName 传真文件名
4: Identifi 传真识别符(一般添入自己的传真号码)
5: Volume Modem应答音量( 0 | 1 | 2 | 3 )
6: Speed 传真需要的速度( 24 | 48 | 72 | 96 | 120 |144)
7: Class 传真类型(CLASS_1 | CLASS_2 | CLASS_1.0 | CLASS_2.0)
8: Is2d 压缩方式(U2D_ENABLE | U2D_DISABLE)
9: ECM 纠错方式(ECM_ENABLE | ECM_DISABLE )
10: hWnd 消息窗口句柄
11: Msg 消息ID (WM_SMARTFAX)
************************************************************************************/
int _SmartReceiveFax(SmartFaxObj *hFax ,unsigned char nPort ,const char *FaxFileName ,
const char *Identifi,EVolume Volume = VO_LOW, EFaxSpeed Speed =FS_1440,
EClass Class = CLASS_1 ,EUsed2D Is2d = U2D_ENABLE ,EErrorCorrect ECM = ECM_ENABLE,
HWND hWnd = NULL ,UINT Msg = NULL);
/**********************************************************************************
函数名:_SmartReceiveFax
功能:接收传真文件
参数:
1: nPort 端口号
2: FaxFileName 传真文件名
3: Identifi 传真识别符(一般添入自己的传真号码)
4: Speed 传真需要的速度(default 96)
5: Fclass CLASS TYPE (defualt Class 1)
6: Twodee 压缩方式(0 - 1D,1 - 2D defaul 1 )
7: ECM 纠错方式(defaul 1)
8: hWnd 接受传真消息的窗口句柄
9: Msg 传真消息
返回值:
0: End if function completes successfully
-1: Exception error
101: Failed to Open FAX file ~
102: Couldn't conneced within 35 secs of ATA command
103: Resevr
104: Failed to send CSI frames
105: Failed to send DIS frames
106: Failed to send NFS frames
107: Failed to send other negotiating frames
108: Failed to send CFR frames
109: Failed to training
110: Failed to send FTT frames
111: Failed to set training speed 3 times
112: Failed to send CRP frames
113: Failed to dropped carrier within 5 s
114: Failed to respond to +FRM properly
115: Failed to get modem data
116: Failed to accept page data
201: Couldn't be found transmit file
202: Transmit file isn't TIFF CLASS
203: Call isn't answered within 30 s
204: Machine can't receive fax data
205: Couldn't set +FTM
206: Couldn't set +FTM
210: NO DIALTONE
211: BUSY
212: NO ANSWER
213: NO CARRIER
*******************************************************************************/
/**********************************************************************************
函数名: <SmartSendFax>
----------------------------
功能: 直接通过端口接收传真
----------------------------
参数:
1: FaxParam 传真参数 (见SFaxParam定义)
************************************************************************************/
int SmartSendFax(SFaxParam *FaxParam);
/**********************************************************************************
函数名:<_SmartSendFax>
----------------------------
功能: 直接通过端口发送传真
----------------------------
参数:
1: hFax 传真对象句柄
2: nPort 端口号
3: FileName 传真文件名
4: Identifi 传真识别符(一般添入自己的传真号码)
5: Volume Modem应答音量( 0 | 1 | 2 | 3 )
6: Speed 传真需要的速度( 24 | 48 | 72 | 96 | 120 |144)
7: Class 传真类型(CLASS_1 | CLASS_2 | CLASS_1.0 | CLASS_2.0)
8: Is2d 压缩方式(U2D_ENABLE | U2D_DISABLE)
9: ECM 纠错方式(ECM_ENABLE | ECM_DISABLE )
10: CreateHead 建立传真页眉信息
11: Resolution 传真质量
12: From 发送者
13: To 接受者
14: hWnd 消息窗口句柄
15: Msg 消息ID (WM_SMARTFAX)
************************************************************************************/
int _SmartSendFax(SmartFaxObj *hFax ,unsigned char nPort,const char *Tel,
const char *FaxFileName, const char *Identifi,EVolume Volume ,EFaxSpeed Speed,
EUsed2D Is2d,EErrorCorrect ECM,ECreateHead CreateHead,EResolution Resolution,
const char * From ,const char * Receiver,HWND hWnd,UINT Msg,int nStartPage);
/**********************************************************************************
函数名:SmartSendFax
功能:发送传真文件
参数:
1: nPort 端口号
2: Tel 接受端号码
3: FaxFileName 传真文件名
4: Identifi 传真识别符(一般添入自己的传真号码)
5: Speed 传真需要的速度(default 96)
6: Fclass CLASS TYPE (defualt Class 1)
7: Twodee 压缩方式(0 - 1D,1 - 2D defaul 1 )
8: ECM 纠错方式(defaul 1)
9: hWnd 接受传真消息的窗口句柄
9: Msg 传真消息
返回值:
0: End if function completes successfully
-1: Exception error
101: Failed to Open FAX file ~
102: Couldn't conneced within 35 secs of ATA command
103: Resevr
104: Failed to send CSI frames
105: Failed to send DIS frames
106: Failed to send NFS frames
107: Failed to send other negotiating frames
108: Failed to send CFR frames
109: Failed to training
110: Failed to send FTT frames
111: Failed to set training speed 3 times
112: Failed to send CRP frames
113: Failed to dropped carrier within 5 s
114: Failed to respond to +FRM properly
115: Failed to get modem data
116: Failed to accept page data
201: Couldn't be found transmit file
202: Transmit file isn't TIFF CLASS
203: Call isn't answered within 30 s
204: Machine can't receive fax data
205: Couldn't set +FTM
206: Couldn't set +FTM
210: NO DIALTONE
211: BUSY
212: NO ANSWER
213: NO CARRIER
*******************************************************************************/
// fax message for windows
#define WM_SMARTFAX WM_USER+101
#define WM_FAXMISSIONINOVER 0x101
#define WM_FAXCHANGESTATE 0x102
#define WM_FAXSETCIS 0x103
#define WM_FAXSETSPEED 0x104
#define WM_FAXMISSIONOUTOVER 0x105
#define WM_FAXRECVPAGEDATA 0x106
#define WM_FAXSENDPAGEDATA 0x107
#define WM_ACCEPTPAGE 0x108
#define WM_REJECTPAGE 0x109
#define WM_FAXSPEED 0x110
#define WM_FAXPROCESSPAGEDATA 0x111
#define WM_FAXUSERCANCE 0x112
#define WM_FAXECM 0x113
#define WM_FAXPAGE 0x114
#define WM_FAXRING 0x115
#define WM_FAXMONITORCLOSE 0x116
#define WM_FAXMONITORSTART 0x117
#define WM_FAXMONITORFAIL 0x118
#define WM_FAXANI 0x119
#define FAXINIT 0
#define DIALFAX 1
#define ANSWER 2
#define NEGOTIATION 3
#define TRAINING 4
/*
#ifdef __cplusplus
}
#endif
*/
#endif //__SMARTFAX_H_⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -