ntstatus.h

WIN2000下利用汇编做文件过滤驱动程序

//  {Partial Copy}
//  Due to protection conflicts not all the requested bytes could be copied.
//
#define STATUS_PARTIAL_COPY              ((NTSTATUS)0x8000000DL)

//
// MessageId: STATUS_DEVICE_PAPER_EMPTY
//
// MessageText:
//
//  {Out of Paper}
//  The printer is out of paper.
//
#define STATUS_DEVICE_PAPER_EMPTY        ((NTSTATUS)0x8000000EL)

//
// MessageId: STATUS_DEVICE_POWERED_OFF
//
// MessageText:
//
//  {Device Power Is Off}
//  The printer power has been turned off.
//
#define STATUS_DEVICE_POWERED_OFF        ((NTSTATUS)0x8000000FL)

//
// MessageId: STATUS_DEVICE_OFF_LINE
//
// MessageText:
//
//  {Device Offline}
//  The printer has been taken offline.
//
#define STATUS_DEVICE_OFF_LINE           ((NTSTATUS)0x80000010L)

//
// MessageId: STATUS_DEVICE_BUSY
//
// MessageText:
//
//  {Device Busy}
//  The device is currently busy.
//
#define STATUS_DEVICE_BUSY               ((NTSTATUS)0x80000011L)

//
// MessageId: STATUS_NO_MORE_EAS
//
// MessageText:
//
//  {No More EAs}
//  No more extended attributes (EAs) were found for the file.
//
#define STATUS_NO_MORE_EAS               ((NTSTATUS)0x80000012L)

//
// MessageId: STATUS_INVALID_EA_NAME
//
// MessageText:
//
//  {Illegal EA}
//  The specified extended attribute (EA) name contains at least one illegal character.
//
#define STATUS_INVALID_EA_NAME           ((NTSTATUS)0x80000013L)

//
// MessageId: STATUS_EA_LIST_INCONSISTENT
//
// MessageText:
//
//  {Inconsistent EA List}
//  The extended attribute (EA) list is inconsistent.
//
#define STATUS_EA_LIST_INCONSISTENT      ((NTSTATUS)0x80000014L)

//
// MessageId: STATUS_INVALID_EA_FLAG
//
// MessageText:
//
//  {Invalid EA Flag}
//  An invalid extended attribute (EA) flag was set.
//
#define STATUS_INVALID_EA_FLAG           ((NTSTATUS)0x80000015L)

//
// MessageId: STATUS_VERIFY_REQUIRED
//
// MessageText:
//
//  {Verifying Disk}
//  The media has changed and a verify operation is in progress so no reads or writes may be performed to the device, except those used in the verify operation.
//
#define STATUS_VERIFY_REQUIRED           ((NTSTATUS)0x80000016L)

//
// MessageId: STATUS_EXTRANEOUS_INFORMATION
//
// MessageText:
//
//  {Too Much Information}
//  The specified access control list (ACL) contained more information than was expected.
//
#define STATUS_EXTRANEOUS_INFORMATION    ((NTSTATUS)0x80000017L)

//
// MessageId: STATUS_RXACT_COMMIT_NECESSARY
//
// MessageText:
//
//  This warning level status indicates that the transaction state already exists for the registry sub-tree, but that a transaction commit was previously aborted.
//  The commit has NOT been completed, but has not been rolled back either (so it may still be committed if desired).
//
#define STATUS_RXACT_COMMIT_NECESSARY    ((NTSTATUS)0x80000018L)

//
// MessageId: STATUS_NO_MORE_ENTRIES
//
// MessageText:
//
//  {No More Entries}
//  No more entries are available from an enumeration operation.
//
#define STATUS_NO_MORE_ENTRIES           ((NTSTATUS)0x8000001AL)

//
// MessageId: STATUS_FILEMARK_DETECTED
//
// MessageText:
//
//  {Filemark Found}
//  A filemark was detected.
//
#define STATUS_FILEMARK_DETECTED         ((NTSTATUS)0x8000001BL)

//
// MessageId: STATUS_MEDIA_CHANGED
//
// MessageText:
//
//  {Media Changed}
//  The media may have changed.
//
#define STATUS_MEDIA_CHANGED             ((NTSTATUS)0x8000001CL)

//
// MessageId: STATUS_BUS_RESET
//
// MessageText:
//
//  {I/O Bus Reset}
//  An I/O bus reset was detected.
//
#define STATUS_BUS_RESET                 ((NTSTATUS)0x8000001DL)

//
// MessageId: STATUS_END_OF_MEDIA
//
// MessageText:
//
//  {End of Media}
//  The end of the media was encountered.
//
#define STATUS_END_OF_MEDIA              ((NTSTATUS)0x8000001EL)

//
// MessageId: STATUS_BEGINNING_OF_MEDIA
//
// MessageText:
//
//  Beginning of tape or partition has been detected.
//
#define STATUS_BEGINNING_OF_MEDIA        ((NTSTATUS)0x8000001FL)

//
// MessageId: STATUS_MEDIA_CHECK
//
// MessageText:
//
//  {Media Changed}
//  The media may have changed.
//
#define STATUS_MEDIA_CHECK               ((NTSTATUS)0x80000020L)

//
// MessageId: STATUS_SETMARK_DETECTED
//
// MessageText:
//
//  A tape access reached a setmark.
//
#define STATUS_SETMARK_DETECTED          ((NTSTATUS)0x80000021L)

//
// MessageId: STATUS_NO_DATA_DETECTED
//
// MessageText:
//
//  During a tape access, the end of the data written is reached.
//
#define STATUS_NO_DATA_DETECTED          ((NTSTATUS)0x80000022L)

//
// MessageId: STATUS_REDIRECTOR_HAS_OPEN_HANDLES
//
// MessageText:
//
//  The redirector is in use and cannot be unloaded.
//
#define STATUS_REDIRECTOR_HAS_OPEN_HANDLES ((NTSTATUS)0x80000023L)

//
// MessageId: STATUS_SERVER_HAS_OPEN_HANDLES
//
// MessageText:
//
//  The server is in use and cannot be unloaded.
//
#define STATUS_SERVER_HAS_OPEN_HANDLES   ((NTSTATUS)0x80000024L)

//
// MessageId: STATUS_ALREADY_DISCONNECTED
//
// MessageText:
//
//  The specified connection has already been disconnected.
//
#define STATUS_ALREADY_DISCONNECTED      ((NTSTATUS)0x80000025L)

//
// MessageId: STATUS_LONGJUMP
//
// MessageText:
//
//  A long jump has been executed.
//
#define STATUS_LONGJUMP                  ((NTSTATUS)0x80000026L)

//
// MessageId: DBG_EXCEPTION_NOT_HANDLED
//
// MessageText:
//
//  Debugger did not handle the exception.
//
#define DBG_EXCEPTION_NOT_HANDLED        ((NTSTATUS)0x80010001L)    // winnt



/////////////////////////////////////////////////////////////////////////
//
//  Standard Error values
//
/////////////////////////////////////////////////////////////////////////

//
// MessageId: STATUS_UNSUCCESSFUL
//
// MessageText:
//
//  {Operation Failed}
//  The requested operation was unsuccessful.
//
#define STATUS_UNSUCCESSFUL              ((NTSTATUS)0xC0000001L)

//
// MessageId: STATUS_NOT_IMPLEMENTED
//
// MessageText:
//
//  {Not Implemented}
//  The requested operation is not implemented.
//
#define STATUS_NOT_IMPLEMENTED           ((NTSTATUS)0xC0000002L)

//
// MessageId: STATUS_INVALID_INFO_CLASS
//
// MessageText:
//
//  {Invalid Parameter}
//  The specified information class is not a valid information class for the specified object.
//
#define STATUS_INVALID_INFO_CLASS        ((NTSTATUS)0xC0000003L)    // ntsubauth

//
// MessageId: STATUS_INFO_LENGTH_MISMATCH
//
// MessageText:
//
//  The specified information record length does not match the length required for the specified information class.
//
#define STATUS_INFO_LENGTH_MISMATCH      ((NTSTATUS)0xC0000004L)

//
// MessageId: STATUS_ACCESS_VIOLATION
//
// MessageText:
//
//  The instruction at "0x%08lx" referenced memory at "0x%08lx". The memory could not be "%s".
//
#define STATUS_ACCESS_VIOLATION          ((NTSTATUS)0xC0000005L)    // winnt

//
// MessageId: STATUS_IN_PAGE_ERROR
//
// MessageText:
//
//  The instruction at "0x%08lx" referenced memory at "0x%08lx". The required data was not placed into memory because of an I/O error status of "0x%08lx".
//
#define STATUS_IN_PAGE_ERROR             ((NTSTATUS)0xC0000006L)    // winnt

//
// MessageId: STATUS_PAGEFILE_QUOTA
//
// MessageText:
//
//  The pagefile quota for the process has been exhausted.
//
#define STATUS_PAGEFILE_QUOTA            ((NTSTATUS)0xC0000007L)

//
// MessageId: STATUS_INVALID_HANDLE
//
// MessageText:
//
//  An invalid HANDLE was specified.
//
#define STATUS_INVALID_HANDLE            ((NTSTATUS)0xC0000008L)    // winnt

//
// MessageId: STATUS_BAD_INITIAL_STACK
//
// MessageText:
//
//  An invalid initial stack was specified in a call to NtCreateThread.
//
#define STATUS_BAD_INITIAL_STACK         ((NTSTATUS)0xC0000009L)

//
// MessageId: STATUS_BAD_INITIAL_PC
//
// MessageText:
//
//  An invalid initial start address was specified in a call to NtCreateThread.
//
#define STATUS_BAD_INITIAL_PC            ((NTSTATUS)0xC000000AL)

//
// MessageId: STATUS_INVALID_CID
//
// MessageText:
//
//  An invalid Client ID was specified.
//
#define STATUS_INVALID_CID               ((NTSTATUS)0xC000000BL)

//
// MessageId: STATUS_TIMER_NOT_CANCELED
//
// MessageText:
//
//  An attempt was made to cancel or set a timer that has an associated APC and the subject thread is not the thread that originally set the timer with an associated APC routine.
//
#define STATUS_TIMER_NOT_CANCELED        ((NTSTATUS)0xC000000CL)

//
// MessageId: STATUS_INVALID_PARAMETER
//
// MessageText:
//
//  An invalid parameter was passed to a service or function.
//
#define STATUS_INVALID_PARAMETER         ((NTSTATUS)0xC000000DL)

//
// MessageId: STATUS_NO_SUCH_DEVICE
//
// MessageText:
//
//  A device which does not exist was specified.
//
#define STATUS_NO_SUCH_DEVICE            ((NTSTATUS)0xC000000EL)

//
// MessageId: STATUS_NO_SUCH_FILE
//
// MessageText:
//
//  {File Not Found}
//  The file %hs does not exist.
//
#define STATUS_NO_SUCH_FILE              ((NTSTATUS)0xC000000FL)

//
// MessageId: STATUS_INVALID_DEVICE_REQUEST
//
// MessageText:
//
//  The specified request is not a valid operation for the target device.
//
#define STATUS_INVALID_DEVICE_REQUEST    ((NTSTATUS)0xC0000010L)

//
// MessageId: STATUS_END_OF_FILE
//
// MessageText:
//
//  The end-of-file marker has been reached. There is no valid data in the file beyond this marker.
//
#define STATUS_END_OF_FILE               ((NTSTATUS)0xC0000011L)

//
// MessageId: STATUS_WRONG_VOLUME
//
// MessageText:
//
//  {Wrong Volume}
//  The wrong volume is in the drive.
//  Please insert volume %hs into drive %hs.
//
#define STATUS_WRONG_VOLUME              ((NTSTATUS)0xC0000012L)

//
// MessageId: STATUS_NO_MEDIA_IN_DEVICE
//
// MessageText:
//
//  {No Disk}
//  There is no disk in the drive.
//  Please insert a disk into drive %hs.
//
#define STATUS_NO_MEDIA_IN_DEVICE        ((NTSTATUS)0xC0000013L)

//
// MessageId: STATUS_UNRECOGNIZED_MEDIA
//
// MessageText:
//
//  {Unknown Disk Format}
//  The disk in drive %hs is not formatted properly.
//  Please check the disk, and reformat if necessary.
//
#define STATUS_UNRECOGNIZED_MEDIA        ((NTSTATUS)0xC0000014L)

//
// MessageId: STATUS_NONEXISTENT_SECTOR
//
// MessageText:
//
//  {Sector Not Found}
//  The specified sector does not exist.
//
#define STATUS_NONEXISTENT_SECTOR        ((NTSTATUS)0xC0000015L)

//
// MessageId: STATUS_MORE_PROCESSING_REQUIRED
//
// MessageText:
//
//  {Still Busy}
//  The specified I/O request packet (IRP) cannot be disposed of because the I/O operation is not complete.
//
#define STATUS_MORE_PROCESSING_REQUIRED  ((NTSTATUS)0xC0000016L)

//
// MessageId: STATUS_NO_MEMORY
//
// MessageText:
//
//  {Not Enough Quota}
//  Not enough virtual memory or paging file quota is available to complete the specified operation.
//
#define STATUS_NO_MEMORY                 ((NTSTATUS)0xC0000017L)    // winnt

//
// MessageId: STATUS_CONFLICTING_ADDRESSES
//
// MessageText:
//
//  {Conflicting Address Range}
//  The specified address range conflicts with the address space.
//
#define STATUS_CONFLICTING_ADDRESSES     ((NTSTATUS)0xC0000018L)

//
// MessageId: STATUS_NOT_MAPPED_VIEW
//
// MessageText:
//
//  Address range to unmap is not a mapped view.
//
#define STATUS_NOT_MAPPED_VIEW           ((NTSTATUS)0xC0000019L)

//
// MessageId: STATUS_UNABLE_TO_FREE_VM
//
// MessageText:
//
//  Virtual memory cannot be freed.
//
#define STATUS_UNABLE_TO_FREE_VM         ((NTSTATUS)0xC000001AL)

//
// MessageId: STATUS_UNABLE_TO_DELETE_SECTION
//
// MessageText:
//
//  Specified section cannot be deleted.
//
#define STATUS_UNABLE_TO_DELETE_SECTION  ((NTSTATUS)0xC000001BL)

//
// MessageId: STATUS_INVALID_SYSTEM_SERVICE
//
// MessageText:
//
//  An invalid system service was specified in a system service call.
//
#define STATUS_INVALID_SYSTEM_SERVICE    ((NTSTATUS)0xC000001CL)

//
// MessageId: STATUS_ILLEGAL_INSTRUCTION
//
// MessageText:
//
//  {EXCEPTION}
//  Illegal Instruction
//  An attempt was made to execute an illegal instruction.
//
#define STATUS_ILLEGAL_INSTRUCTION       ((NTSTATUS)0xC000001DL)    // winnt

//
// MessageId: STATUS_INVALID_LOCK_SEQUENCE
//