ntstatus.h

WIN2000下利用汇编做文件过滤驱动程序

//
// MessageText:
//
//  {Invalid Current Directory}
//  The process cannot switch to the startup current directory %hs.
//  Select OK to set current directory to %hs, or select CANCEL to exit.
//
#define STATUS_BAD_CURRENT_DIRECTORY     ((NTSTATUS)0x40000007L)

//
// MessageId: STATUS_SERIAL_MORE_WRITES
//
// MessageText:
//
//  {Serial IOCTL Complete}
//  A serial I/O operation was completed by another write to a serial port.
//  (The IOCTL_SERIAL_XOFF_COUNTER reached zero.)
//
#define STATUS_SERIAL_MORE_WRITES        ((NTSTATUS)0x40000008L)

//
// MessageId: STATUS_REGISTRY_RECOVERED
//
// MessageText:
//
//  {Registry Recovery}
//  One of the files containing the system's Registry data had to be recovered by use of a log or alternate copy.
//  The recovery was successful.
//
#define STATUS_REGISTRY_RECOVERED        ((NTSTATUS)0x40000009L)

//
// MessageId: STATUS_FT_READ_RECOVERY_FROM_BACKUP
//
// MessageText:
//
//  {Redundant Read}
//  To satisfy a read request, the NT fault-tolerant file system successfully read the requested data from a redundant copy.
//  This was done because the file system encountered a failure on a member of the fault-tolerant volume,
//  but was unable to reassign the failing area of the device.
//
#define STATUS_FT_READ_RECOVERY_FROM_BACKUP ((NTSTATUS)0x4000000AL)

//
// MessageId: STATUS_FT_WRITE_RECOVERY
//
// MessageText:
//
//  {Redundant Write}
//  To satisfy a write request, the NT fault-tolerant file system successfully wrote a redundant copy of the information.
//  This was done because the file system encountered a failure on a member of the fault-tolerant volume,
//  but was not able to reassign the failing area of the device.
//
#define STATUS_FT_WRITE_RECOVERY         ((NTSTATUS)0x4000000BL)

//
// MessageId: STATUS_SERIAL_COUNTER_TIMEOUT
//
// MessageText:
//
//  {Serial IOCTL Timeout}
//  A serial I/O operation completed because the time-out period expired.
//  (The IOCTL_SERIAL_XOFF_COUNTER had not reached zero.)
//
#define STATUS_SERIAL_COUNTER_TIMEOUT    ((NTSTATUS)0x4000000CL)

//
// MessageId: STATUS_NULL_LM_PASSWORD
//
// MessageText:
//
//  {Password Too Complex}
//  The Windows password is too complex to be converted to a LAN Manager password.
//  The LAN Manager password returned is a NULL string.
//
#define STATUS_NULL_LM_PASSWORD          ((NTSTATUS)0x4000000DL)

//
// MessageId: STATUS_IMAGE_MACHINE_TYPE_MISMATCH
//
// MessageText:
//
//  {Machine Type Mismatch}
//  The image file %hs is valid, but is for a machine type other than the current machine. Select OK to continue, or CANCEL to fail the DLL load.
//
#define STATUS_IMAGE_MACHINE_TYPE_MISMATCH ((NTSTATUS)0x4000000EL)

//
// MessageId: STATUS_RECEIVE_PARTIAL
//
// MessageText:
//
//  {Partial Data Received}
//  The network transport returned partial data to its client. The remaining data will be sent later.
//
#define STATUS_RECEIVE_PARTIAL           ((NTSTATUS)0x4000000FL)

//
// MessageId: STATUS_RECEIVE_EXPEDITED
//
// MessageText:
//
//  {Expedited Data Received}
//  The network transport returned data to its client that was marked as expedited by the remote system.
//
#define STATUS_RECEIVE_EXPEDITED         ((NTSTATUS)0x40000010L)

//
// MessageId: STATUS_RECEIVE_PARTIAL_EXPEDITED
//
// MessageText:
//
//  {Partial Expedited Data Received}
//  The network transport returned partial data to its client and this data was marked as expedited by the remote system. The remaining data will be sent later.
//
#define STATUS_RECEIVE_PARTIAL_EXPEDITED ((NTSTATUS)0x40000011L)

//
// MessageId: STATUS_EVENT_DONE
//
// MessageText:
//
//  {TDI Event Done}
//  The TDI indication has completed successfully.
//
#define STATUS_EVENT_DONE                ((NTSTATUS)0x40000012L)

//
// MessageId: STATUS_EVENT_PENDING
//
// MessageText:
//
//  {TDI Event Pending}
//  The TDI indication has entered the pending state.
//
#define STATUS_EVENT_PENDING             ((NTSTATUS)0x40000013L)

//
// MessageId: STATUS_CHECKING_FILE_SYSTEM
//
// MessageText:
//
//  Checking file system on %wZ
//
#define STATUS_CHECKING_FILE_SYSTEM      ((NTSTATUS)0x40000014L)

//
// MessageId: STATUS_FATAL_APP_EXIT
//
// MessageText:
//
//  {Fatal Application Exit}
//  %hs
//
#define STATUS_FATAL_APP_EXIT            ((NTSTATUS)0x40000015L)

//
// MessageId: STATUS_PREDEFINED_HANDLE
//
// MessageText:
//
//  The specified registry key is referenced by a predefined handle.
//
#define STATUS_PREDEFINED_HANDLE         ((NTSTATUS)0x40000016L)

//
// MessageId: STATUS_WAS_UNLOCKED
//
// MessageText:
//
//  {Page Unlocked}
//  The page protection of a locked page was changed to 'No Access' and the page was unlocked from memory and from the process.
//
#define STATUS_WAS_UNLOCKED              ((NTSTATUS)0x40000017L)

//
// MessageId: STATUS_SERVICE_NOTIFICATION
//
// MessageText:
//
//  %hs
//
#define STATUS_SERVICE_NOTIFICATION      ((NTSTATUS)0x40000018L)

//
// MessageId: STATUS_WAS_LOCKED
//
// MessageText:
//
//  {Page Locked}
//  One of the pages to lock was already locked.
//
#define STATUS_WAS_LOCKED                ((NTSTATUS)0x40000019L)

//
// MessageId: STATUS_LOG_HARD_ERROR
//
// MessageText:
//
//  Application popup: %1 : %2
//
#define STATUS_LOG_HARD_ERROR            ((NTSTATUS)0x4000001AL)

//
// MessageId: STATUS_ALREADY_WIN32
//
// MessageText:
//
//  STATUS_ALREADY_WIN32
//
#define STATUS_ALREADY_WIN32             ((NTSTATUS)0x4000001BL)

//
// MessageId: STATUS_WX86_UNSIMULATE
//
// MessageText:
//
//  Exception status code used by Win32 x86 emulation subsystem.
//
#define STATUS_WX86_UNSIMULATE           ((NTSTATUS)0x4000001CL)

//
// MessageId: STATUS_WX86_CONTINUE
//
// MessageText:
//
//  Exception status code used by Win32 x86 emulation subsystem.
//
#define STATUS_WX86_CONTINUE             ((NTSTATUS)0x4000001DL)

//
// MessageId: STATUS_WX86_SINGLE_STEP
//
// MessageText:
//
//  Exception status code used by Win32 x86 emulation subsystem.
//
#define STATUS_WX86_SINGLE_STEP          ((NTSTATUS)0x4000001EL)

//
// MessageId: STATUS_WX86_BREAKPOINT
//
// MessageText:
//
//  Exception status code used by Win32 x86 emulation subsystem.
//
#define STATUS_WX86_BREAKPOINT           ((NTSTATUS)0x4000001FL)

//
// MessageId: STATUS_WX86_EXCEPTION_CONTINUE
//
// MessageText:
//
//  Exception status code used by Win32 x86 emulation subsystem.
//
#define STATUS_WX86_EXCEPTION_CONTINUE   ((NTSTATUS)0x40000020L)

//
// MessageId: STATUS_WX86_EXCEPTION_LASTCHANCE
//
// MessageText:
//
//  Exception status code used by Win32 x86 emulation subsystem.
//
#define STATUS_WX86_EXCEPTION_LASTCHANCE ((NTSTATUS)0x40000021L)

//
// MessageId: STATUS_WX86_EXCEPTION_CHAIN
//
// MessageText:
//
//  Exception status code used by Win32 x86 emulation subsystem.
//
#define STATUS_WX86_EXCEPTION_CHAIN      ((NTSTATUS)0x40000022L)

//
// MessageId: STATUS_IMAGE_MACHINE_TYPE_MISMATCH_EXE
//
// MessageText:
//
//  {Machine Type Mismatch}
//  The image file %hs is valid, but is for a machine type other than the current machine.
//
#define STATUS_IMAGE_MACHINE_TYPE_MISMATCH_EXE ((NTSTATUS)0x40000023L)

//
// MessageId: STATUS_NO_YIELD_PERFORMED
//
// MessageText:
//
//  A yield execution was performed and no thread was available to run.
//
#define STATUS_NO_YIELD_PERFORMED        ((NTSTATUS)0x40000024L)

//
// MessageId: STATUS_TIMER_RESUME_IGNORED
//
// MessageText:
//
//  The resumable flag to a timer API was ignored.
//
#define STATUS_TIMER_RESUME_IGNORED      ((NTSTATUS)0x40000025L)

//
// MessageId: STATUS_ARBITRATION_UNHANDLED
//
// MessageText:
//
//  The arbiter has deferred arbitration of these resources to its parent
//
#define STATUS_ARBITRATION_UNHANDLED     ((NTSTATUS)0x40000026L)

//
// MessageId: STATUS_CARDBUS_NOT_SUPPORTED
//
// MessageText:
//
//  The device "%hs" has detected a CardBus card in its slot, but the firmware on this system is not configured to allow the CardBus controller to be run in CardBus mode.
//  The operating system will currently accept only 16-bit (R2) pc-cards on this controller.
//
#define STATUS_CARDBUS_NOT_SUPPORTED     ((NTSTATUS)0x40000027L)

//
// MessageId: STATUS_WX86_CREATEWX86TIB
//
// MessageText:
//
//  Exception status code used by Win32 x86 emulation subsystem.
//
#define STATUS_WX86_CREATEWX86TIB        ((NTSTATUS)0x40000028L)

//
// MessageId: STATUS_MP_PROCESSOR_MISMATCH
//
// MessageText:
//
//  The CPUs in this multiprocessor system are not all the same revision level.  To use all processors the operating system restricts itself to the features of the least capable processor in the system.  Should problems occur with this system, contact the CPU manufacturer to see if this mix of processors is supported. 
//
#define STATUS_MP_PROCESSOR_MISMATCH     ((NTSTATUS)0x40000029L)

//
// MessageId: DBG_REPLY_LATER
//
// MessageText:
//
//  Debugger will reply later.
//
#define DBG_REPLY_LATER                  ((NTSTATUS)0x40010001L)

//
// MessageId: DBG_UNABLE_TO_PROVIDE_HANDLE
//
// MessageText:
//
//  Debugger can not provide handle.
//
#define DBG_UNABLE_TO_PROVIDE_HANDLE     ((NTSTATUS)0x40010002L)

//
// MessageId: DBG_TERMINATE_THREAD
//
// MessageText:
//
//  Debugger terminated thread.
//
#define DBG_TERMINATE_THREAD             ((NTSTATUS)0x40010003L)    // winnt

//
// MessageId: DBG_TERMINATE_PROCESS
//
// MessageText:
//
//  Debugger terminated process.
//
#define DBG_TERMINATE_PROCESS            ((NTSTATUS)0x40010004L)    // winnt

//
// MessageId: DBG_CONTROL_C
//
// MessageText:
//
//  Debugger got control C.
//
#define DBG_CONTROL_C                    ((NTSTATUS)0x40010005L)    // winnt

//
// MessageId: DBG_PRINTEXCEPTION_C
//
// MessageText:
//
//  Debugger printerd exception on control C.
//
#define DBG_PRINTEXCEPTION_C             ((NTSTATUS)0x40010006L)

//
// MessageId: DBG_RIPEXCEPTION
//
// MessageText:
//
//  Debugger recevice RIP exception.
//
#define DBG_RIPEXCEPTION                 ((NTSTATUS)0x40010007L)

//
// MessageId: DBG_CONTROL_BREAK
//
// MessageText:
//
//  Debugger received control break.
//
#define DBG_CONTROL_BREAK                ((NTSTATUS)0x40010008L)    // winnt



/////////////////////////////////////////////////////////////////////////
//
// Standard Warning values
//
//
// Note:  Do NOT use the value 0x80000000L, as this is a non-portable value
//        for the NT_SUCCESS macro. Warning values start with a code of 1.
//
/////////////////////////////////////////////////////////////////////////

//
// MessageId: STATUS_GUARD_PAGE_VIOLATION
//
// MessageText:
//
//  {EXCEPTION}
//  Guard Page Exception
//  A page of memory that marks the end of a data structure, such as a stack or an array, has been accessed.
//
#define STATUS_GUARD_PAGE_VIOLATION      ((NTSTATUS)0x80000001L)    // winnt

//
// MessageId: STATUS_DATATYPE_MISALIGNMENT
//
// MessageText:
//
//  {EXCEPTION}
//  Alignment Fault
//  A datatype misalignment was detected in a load or store instruction.
//
#define STATUS_DATATYPE_MISALIGNMENT     ((NTSTATUS)0x80000002L)    // winnt

//
// MessageId: STATUS_BREAKPOINT
//
// MessageText:
//
//  {EXCEPTION}
//  Breakpoint
//  A breakpoint has been reached.
//
#define STATUS_BREAKPOINT                ((NTSTATUS)0x80000003L)    // winnt

//
// MessageId: STATUS_SINGLE_STEP
//
// MessageText:
//
//  {EXCEPTION}
//  Single Step
//  A single step or trace operation has just been completed.
//
#define STATUS_SINGLE_STEP               ((NTSTATUS)0x80000004L)    // winnt

//
// MessageId: STATUS_BUFFER_OVERFLOW
//
// MessageText:
//
//  {Buffer Overflow}
//  The data was too large to fit into the specified buffer.
//
#define STATUS_BUFFER_OVERFLOW           ((NTSTATUS)0x80000005L)

//
// MessageId: STATUS_NO_MORE_FILES
//
// MessageText:
//
//  {No More Files}
//  No more files were found which match the file specification.
//
#define STATUS_NO_MORE_FILES             ((NTSTATUS)0x80000006L)

//
// MessageId: STATUS_WAKE_SYSTEM_DEBUGGER
//
// MessageText:
//
//  {Kernel Debugger Awakened}
//  the system debugger was awakened by an interrupt.
//
#define STATUS_WAKE_SYSTEM_DEBUGGER      ((NTSTATUS)0x80000007L)

//
// MessageId: STATUS_HANDLES_CLOSED
//
// MessageText:
//
//  {Handles Closed}
//  Handles to objects have been automatically closed as a result of the requested operation.
//
#define STATUS_HANDLES_CLOSED            ((NTSTATUS)0x8000000AL)

//
// MessageId: STATUS_NO_INHERITANCE
//
// MessageText:
//
//  {Non-Inheritable ACL}
//  An access control list (ACL) contains no components that can be inherited.
//
#define STATUS_NO_INHERITANCE            ((NTSTATUS)0x8000000BL)

//
// MessageId: STATUS_GUID_SUBSTITUTION_MADE
//
// MessageText:
//
//  {GUID Substitution}
//  During the translation of a global identifier (GUID) to a Windows security ID (SID), no administratively-defined GUID prefix was found.
//  A substitute prefix was used, which will not compromise system security.
//  However, this may provide a more restrictive access than intended.
//
#define STATUS_GUID_SUBSTITUTION_MADE    ((NTSTATUS)0x8000000CL)

//
// MessageId: STATUS_PARTIAL_COPY
//
// MessageText:
//