s3c2410.h

A tone driver by driving S3c2410 PWM. Compiled by arm-linux-gcc.

#define LCDCON2    (*(volatile unsigned *)(VA_LCD_BASE+0x04)) //LCD control 2
#define LCDCON3    (*(volatile unsigned *)(VA_LCD_BASE+0x08)) //LCD control 3
#define LCDCON4    (*(volatile unsigned *)(VA_LCD_BASE+0x0c)) //LCD control 4
#define LCDCON5    (*(volatile unsigned *)(VA_LCD_BASE+0x10)) //LCD control 5
#define LCDADDR1  (*(volatile unsigned *)(VA_LCD_BASE+0x14)) //STN/TFT Frame buffer start address 1
#define LCDADDR2  (*(volatile unsigned *)(VA_LCD_BASE+0x18)) //STN/TFT Frame buffer start address 2
#define LCDADDR3  (*(volatile unsigned *)(VA_LCD_BASE+0x1c)) //STN/TFT Virtual screen address set
#define REDLUT     (*(volatile unsigned *)(VA_LCD_BASE+0x20)) //STN Red lookup table
#define GREENLUT   (*(volatile unsigned *)(VA_LCD_BASE+0x24)) //STN Green lookup table 
#define BLUELUT    (*(volatile unsigned *)(VA_LCD_BASE+0x28)) //STN Blue lookup table
#define DITHMODE   (*(volatile unsigned *)(VA_LCD_BASE+0x4c)) //STN Dithering mode
#define TPAL       (*(volatile unsigned *)(VA_LCD_BASE+0x50)) //TFT Temporary palette
#define LCDINTPND  (*(volatile unsigned *)(VA_LCD_BASE+0x54)) //LCD Interrupt pending
#define LCDSRCPND  (*(volatile unsigned *)(VA_LCD_BASE+0x58)) //LCD Interrupt source
#define LCDINTMSK  (*(volatile unsigned *)(VA_LCD_BASE+0x5c)) //LCD Interrupt mask
#define LCDLPCSEL     (*(volatile unsigned *)(VA_LCD_BASE+0x60)) //LPC3600 Control
                      //Palette start address





#define fLCD1_LINECNT	Fld(10,18)	/* the status of the line counter */
#define LCD1_LINECNT	FMsk(fLCD_LINECNT)

#define fLCD1_CLKVAL	Fld(10,8)	/* rates of VCLK and CLKVAL[9:0] */
#define LCD1_CLKVAL(x)	FInsrt((x), fLCD1_CLKVAL)
#define LCD1_CLKVAL_MSK	FMask(fLCD1_CLKVAL)

#define LCD1_MMODE (1<<7)

#define fLCD1_PNR	Fld(2,5)	/* select the display mode */
#define LCD1_PNR_4D	FInsrt(0x0, fLCD1_PNR)	/* STN: 4-bit dual scan */
#define LCD1_PNR_4S	FInsrt(0x1, fLCD1_PNR)	/* STN: 4-bit single scan */
#define LCD1_PNR_8S	FInsrt(0x2, fLCD1_PNR)	/* STN: 8-bit single scan */
#define LCD1_PNR_TFT	FInsrt(0x3, fLCD1_PNR)	/* TFT LCD */

#define fLCD1_BPP	Fld(4,1)	/* select BPP(Bit Per Pixel) */
#define LCD1_BPP_1S	FInsrt(0x0, fLCD1_BPP)	/* STN: 1 bpp, mono */
#define LCD1_BPP_2S	FInsrt(0x1, fLCD1_BPP)	/* STN: 2 bpp, 4-grey */
#define LCD1_BPP_4S	FInsrt(0x2, fLCD1_BPP)	/* STN: 4 bpp, 16-grey */
#define LCD1_BPP_8S	FInsrt(0x3, fLCD1_BPP)	/* STN: 8 bpp, color */
#define LCD1_BPP_12S	FInsrt(0x4, fLCD1_BPP)	/* STN: 12 bpp, color */
#define LCD1_BPP_1T	FInsrt(0x8, fLCD1_BPP)	/* TFT: 1 bpp */
#define LCD1_BPP_2T	FInsrt(0x9, fLCD1_BPP)	/* TFT: 2 bpp */
#define LCD1_BPP_4T	FInsrt(0xa, fLCD1_BPP)	/* TFT: 4 bpp */
#define LCD1_BPP_8T	FInsrt(0xb, fLCD1_BPP)	/* TFT: 8 bpp */
#define LCD1_BPP_16T	FInsrt(0xc, fLCD1_BPP)	/* TFT: 16 bpp */

#define LCD1_ENVID	(1 << 0)	/* 1: Enable the video output */

#define fLCD2_VBPD	Fld(8,24)	/* TFT: (Vertical Back Porch)
	   # of inactive lines at the start of a frame,
	   after vertical synchronization period. */
//#define LCD2_VBPD	FMsk(fLCD2_VBPD)
#define LCD2_VBPD(x)	FInsrt((x), fLCD2_VBPD)

#define fLCD2_LINEVAL	Fld(10,14)	/* TFT/STN: vertical size of LCD */
#define LCD2_LINEVAL(x)	FInsrt((x), fLCD2_LINEVAL)
#define LCD2_LINEVAL_MSK	FMsk(fLCD2_LINEVAL)

#define fLCD2_VFPD	Fld(8,6)	/* TFT: (Vertical Front Porch)
	   # of inactive lines at the end of a frame,
	   before vertical synchronization period. */
//#define LCD2_VFPD	FMsk(fLCD2_VFPD)
#define LCD2_VFPD(x)	FInsrt((x), fLCD2_VFPD)

#define fLCD2_VSPW	Fld(6,0)	/* TFT: (Vertical Sync Pulse Width)
	   the VSYNC pulse's high level width
	   by counting the # of inactive lines */
//#define LCD2_VSPW	FMsk(fLCD2_VSPW)
#define LCD2_VSPW(x)	FInsrt((x), fLCD2_VSPW)

#define fLCD3_HBPD	Fld(7,19)	/* TFT: (Horizontal Back Porch)
	   # of VCLK periods between the falling edge of HSYNC
	   and the start of active data */
//#define LCD3_HBPD	FMsk(fLCD3_HBPD)
#define LCD3_HBPD(x)	FInsrt((x), fLCD3_HBPD)

#define fLCD3_WDLY	Fld(7,19)	/* STN: delay between VLINE and
	   VCLK by counting the # of the HCLK */
#define LCD3_WDLY	FMsk(fLCD3_WDLY)
#define LCD3_WDLY	FMsk(fLCD3_WDLY)
#define LCD3_WDLY_16	FInsrt(0x0, fLCD3_WDLY)	/* 16 clock */
#define LCD3_WDLY_32	FInsrt(0x1, fLCD3_WDLY)	/* 32 clock */
#define LCD3_WDLY_64	FInsrt(0x2, fLCD3_WDLY)	/* 64 clock */
#define LCD3_WDLY_128	FInsrt(0x3, fLCD3_WDLY)	/* 128 clock */

#define fLCD3_HOZVAL	Fld(11,8)	/* horizontal size of LCD */
//#define LCD3_HOZVAL	FMsk(fLCD3_HOZVAL)
#define LCD3_HOZVAL(x)	FInsrt((x), fLCD3_HOZVAL)
#define LCD3_HOZVAL_MSK	FMsk(fLCD3_HOZVAL)

#define fLCD3_HFPD	Fld(8,0)	/* TFT: (Horizontal Front Porch)
	   # of VCLK periods between the end of active date
	   and the rising edge of HSYNC */
//#define LCD3_HFPD	FMsk(LCD3_HFPD)
#define LCD3_HFPD(x)	FInsrt((x), fLCD3_HFPD)

#define fLCD3_LINEBLNK	Fld(8,0)	/* STN: the blank time
	   in one horizontal line duration time.
	   the unit of LINEBLNK is HCLK x 8 */
//#define LCD3_LINEBLNK	FMsk(fLCD3_LINEBLNK)
#define LCD3_LINEBLNK	FInsrt(fLCD3_LINEBLNK)

#if 0
#define LCD4_PALADDEN	(1 << 24)	/* TFT: enable Pallete index offset */
#define fLCD4_ADDVAL	Fld(8,16)	/* TFT: Pallete index offset */
#define LCD4_ADDVAL	FMsk(fLCD4_ADDVAL)
#endif

#define fLCD4_MVAL	Fld(8,8)	/* STN: the rate at which the VM signal
	   will toggle if the MMODE bit is set logic '1' */
//#define LCD4_MVAL	FMsk(fLCD4_MVAL)
#define LCD4_MVAL(x)	FInsrt((x), fLCD4_MVAL)

#define fLCD4_HSPW	Fld(8,0)	/* TFT: (Horizontal Sync Pulse Width)
	   HSYNC pulse's high lvel width by counting the # of the VCLK */
//#define LCD4_HSPW	FMsk(fLCD4_HSPW)
#define LCD4_HSPW(x)	FInsrt((x), fLCD4_HSPW)

#define fLCD4_WLH	Fld(8,0)	/* STN: VLINE pulse's high level width
	   by counting the # of the HCLK */
//#define LCD4_WLH	FMsk(fLCD4_WLH)
#define LCD4_WLH(x)	FInsrt((x), fLCD4_WLH)
#define LCD4_WLH_16	FInsrt(0x0, fLCD4_WLH)	/* 16 clock */
#define LCD4_WLH_32	FInsrt(0x1, fLCD4_WLH)	/* 32 clock */
#define LCD4_WLH_64	FInsrt(0x2, fLCD4_WLH)	/* 64 clock */
#define LCD4_WLH_128	FInsrt(0x3, fLCD4_WLH)	/* 128 clock */

#define fLCD5_VSTAT	Fld(2,19)	/* TFT: Vertical Status (ReadOnly) */
#define LCD5_VSTAT	FMsk(fLCD5_VSTAT)
#define LCD5_VSTAT_VS	0x00	/* VSYNC */
#define LCD5_VSTAT_BP	0x01	/* Back Porch */
#define LCD5_VSTAT_AC	0x02	/* Active */
#define LCD5_VSTAT_FP	0x03	/* Front Porch */

#define fLCD5_HSTAT	Fld(2,17)	/* TFT: Horizontal Status (ReadOnly) */
#define LCD5_HSTAT	FMsk(fLCD5_HSTAT)
#define LCD5_HSTAT_HS	0x00	/* HSYNC */
#define LCD5_HSTAT_BP	0x01	/* Back Porch */
#define LCD5_HSTAT_AC	0x02	/* Active */
#define LCD5_HSTAT_FP	0x03	/* Front Porch */

#if 0
#define LCD5_BGREN	(1 << 16)	/* STN,1 : VD output order is BGR */
#define LCD5_SLOWCLK	(1 << 14)	/* STN,1 : SLOW CLK SYNC enable */
#define LCD5_SELFREF	(1 << 13)	/* STN,1 : LCD self refresh enable */
#endif

#define LCD5_BPP24BL	(1 << 12)
#define LCD5_FRM565		(1 << 11)
#define LCD5_INVVCLK	(1 << 10)	/* STN/TFT :
	   1 : video data is fetched at VCLK falling edge
	   0 : video data is fetched at VCLK rising edge */
#define LCD5_INVVLINE	(1 << 9)	/* STN/TFT :
	   1 : VLINE/HSYNC pulse polarity is inverted */
#define LCD5_INVVFRAME	(1 << 8)	/* STN/TFT :
	   1 : VFRAME/VSYNC pulse polarity is inverted */
#define LCD5_INVVD	(1 << 7)	/* STN/TFT :
	   1 : VD (video data) pulse polarity is inverted */
#define LCD5_INVVDEN	(1 << 6)	/* TFT :
	   1 : VDEN signal polarity is inverted */
#define LCD5_INVPWREN	(1 << 5)
#define LCD5_INVLEND	(1 << 4)	/* TFT :
	   1 : LEND signal polarity is inverted */
#define LCD5_PWREN	(1 << 3)
#define LCD5_LEND	(1 << 2)	/* TFT,1 : Enable LEND signal */
#define LCD5_BSWP	(1 << 1)	/* STN/TFT,1 : Byte swap enable */
#define LCD5_HWSWP	(1 << 0)	/* STN/TFT,1 : HalfWord swap enable */

#define fLCDADDR_BANK	Fld(9,21)	/* bank location for video buffer */
#define LCDADDR_BANK(x)	FInsrt((x), fLCDADDR_BANK)

#define fLCDADDR_BASEU	Fld(21,0)	/* address of upper left corner */
#define LCDADDR_BASEU(x)	FInsrt((x), fLCDADDR_BASEU)

#define fLCDADDR_BASEL	Fld(21,0)	/* address of lower right corner */
#define LCDADDR_BASEL(x)	FInsrt((x), fLCDADDR_BASEL)

#define fLCDADDR_OFFSET	Fld(11,11)	/* Virtual screen offset size
					   (# of half words) */
#define LCDADDR_OFFSET(x)	FInsrt((x), fLCDADDR_OFFSET)

#define fLCDADDR_PAGE	Fld(11,0)	/* Virtual screen page width
					   (# of half words) */
#define LCDADDR_PAGE(x)	FInsrt((x), fLCDADDR_PAGE)

#define TPAL_LEN	(1 << 24)	/* 1 : Temp. Pallete Register enable */
#define fTPAL_VAL	Fld(24,0)	/* Temp. Pallete Register value */
//#define TPAL_VAL	FMsk(fTPAL_VAL)
#define TPAL_VAL(x)	FInsrt((x), fTPAL_VAL)
#define TPAL_VAL_RED(x)	FInsrt((x), Fld(8,16))
#define TPAL_VAL_GREEN(x)	FInsrt((x), Fld(8,8))
#define TPAL_VAL_BLUE(x)	FInsrt((x), Fld(8,0))





// LCD CONTROLLER
/*#define rLCDCON1    (*(volatile unsigned *)(VA_LCD_BASE+0x00)) //LCD control 1
#define rLCDCON2    (*(volatile unsigned *)(VA_LCD_BASE+0x04)) //LCD control 2
#define rLCDCON3    (*(volatile unsigned *)(VA_LCD_BASE+0x08)) //LCD control 3
#define rLCDCON4    (*(volatile unsigned *)(VA_LCD_BASE+0x0c)) //LCD control 4
#define rLCDCON5    (*(volatile unsigned *)(VA_LCD_BASE+0x10)) //LCD control 5
#define rLCDSADDR1  (*(volatile unsigned *)(VA_LCD_BASE+0x14)) //STN/TFT Frame buffer start address 1
#define rLCDSADDR2  (*(volatile unsigned *)(VA_LCD_BASE+0x18)) //STN/TFT Frame buffer start address 2
#define rLCDSADDR3  (*(volatile unsigned *)(VA_LCD_BASE+0x1c)) //STN/TFT Virtual screen address set
#define rREDLUT     (*(volatile unsigned *)(VA_LCD_BASE+0x20)) //STN Red lookup table
#define rGREENLUT   (*(volatile unsigned *)(VA_LCD_BASE+0x24)) //STN Green lookup table 
#define rBLUELUT    (*(volatile unsigned *)(VA_LCD_BASE+0x28)) //STN Blue lookup table
#define rDITHMODE   (*(volatile unsigned *)(VA_LCD_BASE+0x4c)) //STN Dithering mode
#define rTPAL       (*(volatile unsigned *)(VA_LCD_BASE+0x50)) //TFT Temporary palette
#define rLCDINTPND  (*(volatile unsigned *)(VA_LCD_BASE+0x54)) //LCD Interrupt pending
#define rLCDSRCPND  (*(volatile unsigned *)(VA_LCD_BASE+0x58)) //LCD Interrupt source
#define rLCDINTMSK  (*(volatile unsigned *)(VA_LCD_BASE+0x5c)) //LCD Interrupt mask
#define rLPCSEL     (*(volatile unsigned *)(VA_LCD_BASE+0x60)) //LPC3600 Control
#define PALETTE     0x4d000400                         //Palette start address*/




#define U8 unsigned char 
// NAND flash
/*
 * NAND Flash Controller (Page 6-1 ~ 6-8)
 *
 * Register
   NFCONF   NAND Flash Configuration    [word, R/W, 0x00000000]
   NFCMD    NAND Flash Command Set      [word, R/W, 0x00000000]
   NFADDR   NAND Flash Address Set      [word, R/W, 0x00000000]
   NFDATA   NAND Flash Data             [word, R/W, 0x00000000]
   NFSTAT   NAND Flash Status           [word, R, 0x00000000]
   NFECC    NAND Flash ECC              [3 bytes, R, 0x00000000]
 *
 */
 
/*#define bNAND_CTL(Nb)	__REG(0x4e000000 + (Nb))
#define NFCONF		bNAND_CTL(0x00)
#define NFCMD       bNAND_CTL(0x04)
#define NFADDR      bNAND_CTL(0x08)
#define NFDATA      bNAND_CTL(0x0c)
#define NFSTAT      bNAND_CTL(0x10)
#define NFECC       bNAND_CTL(0x14)*/
 
 
#define NFCONF     (*(volatile unsigned *)(VA_NAND_BASE+0x00))      //NAND Flash configuration
#define NFCMD      (*(volatile unsigned *)(VA_NAND_BASE+0x04))            //NADD Flash command
#define NFADDR     (*(volatile unsigned *)(VA_NAND_BASE+0x08))            //NAND Flash address
#define NFDATA     (*(volatile unsigned *)(VA_NAND_BASE+0x0c))            //NAND Flash data
#define NFSTAT     (*(volatile unsigned *)(VA_NAND_BASE+0x10))      //NAND Flash operation status
#define NFECC      (*(volatile unsigned *)(VA_NAND_BASE+0x14))      //NAND Flash ECC


#define fNFCONF_TWRPH1   Fld(3,0)
#define NFCONF_TWRPH1    FMsk(fNFCONF_TWRPH1)
#define NFCONF_TWRPH1_0  FInsrt(0x0, fNFCONF_TWRPH1) /* 0 */
#define fNFCONF_TWRPH0   Fld(3,4)
#define NFCONF_TWRPH0    FMsk(fNFCONF_TWRPH0)
#define NFCONF_TWRPH0_3  FInsrt(0x3, fNFCONF_TWRPH0) /* 3 */
#define fNFCONF_TACLS    Fld(3,8)