1.acf

单片的得isp实现的全部资料。大家看看阿

--
--  Copyright (C) 1988-2002 Altera Corporation
--  Any megafunction design, and related net list (encrypted or decrypted),
--  support information, device programming or simulation file, and any other
--  associated documentation or information provided by Altera or a partner
--  under Altera's Megafunction Partnership Program may be used only to
--  program PLD devices (but not masked PLD devices) from Altera.  Any other
--  use of such megafunction design, net list, support information, device
--  programming or simulation file, or any other related documentation or
--  information is prohibited for any other purpose, including, but not
--  limited to modification, reverse engineering, de-compiling, or use with
--  any other silicon devices, unless such use is explicitly licensed under
--  a separate agreement with Altera or a megafunction partner.  Title to
--  the intellectual property, including patents, copyrights, trademarks,
--  trade secrets, or maskworks, embodied in any such megafunction design,
--  net list, support information, device programming or simulation file, or
--  any other related documentation or information provided by Altera or a
--  megafunction partner, remains with Altera, the megafunction partner, or
--  their respective licensors.  No other licenses, including any licenses
--  needed under any third party's intellectual property, are provided herein.
--
CHIP 1
BEGIN
	DEVICE = EPM7128SQC100-10;
	"|74373:17|:16" :	LOCATION = LC76;
	|PX11 :	OUTPUT_PIN = 100;
	|PX12 :	OUTPUT_PIN = 99;
	|PX13 :	OUTPUT_PIN = 98;
	|PX21 :	OUTPUT_PIN = 96;
	|PX22 :	OUTPUT_PIN = 95;
	|PX23 :	OUTPUT_PIN = 94;
	|RD :	INPUT_PIN = 92;
	|WR :	INPUT_PIN = 91;
	|INT_COMI :	INPUT_PIN = 87;
	|/CS_COM :	OUTPUT_PIN = 86;
	|SMOG :	OUTPUT_PIN = 85;
	|T/R1 :	OUTPUT_PIN = 83;
	|/CS_KT :	OUTPUT_PIN = 82;
	|/CS_SW :	OUTPUT_PIN = 81;
	|/CS_T :	OUTPUT_PIN = 78;
	|T/R :	INPUT_PIN = 79;
	|RESET :	INPUT_PIN = 80;
	|ALE :	INPUT_PIN = 77;
	|EA14 :	OUTPUT_PIN = 74;
	|EA17 :	OUTPUT_PIN = 73;
	|EA16 :	OUTPUT_PIN = 72;
	|EA12 :	OUTPUT_PIN = 71;
	|EA7 :	OUTPUT_PIN = 69;
	|EA15 :	OUTPUT_PIN = 67;
	|EA5 :	OUTPUT_PIN = 66;
	|EA4 :	OUTPUT_PIN = 65;
	|EA3 :	OUTPUT_PIN = 63;
	|EA2 :	OUTPUT_PIN = 62;
	|EA1 :	OUTPUT_PIN = 60;
	|EA0 :	OUTPUT_PIN = 59;
	|EM0 :	OUTPUT_PIN = 58;
	|EA10 :	OUTPUT_PIN = 57;
	|EA9 :	OUTPUT_PIN = 56;
	|EA11 :	OUTPUT_PIN = 55;
	|EA13 :	OUTPUT_PIN = 54;
	|EA8 :	OUTPUT_PIN = 52;
	|EA18 :	OUTPUT_PIN = 51;
	|A14 :	INPUT_PIN = 50;
	|A15 :	INPUT_PIN = 49;
	|D7 :	INPUT_PIN = 47;
	|D6 :	INPUT_PIN = 46;
	|D5 :	INPUT_PIN = 44;
	|D4 :	INPUT_PIN = 43;
	|D3 :	INPUT_PIN = 42;
	|D2 :	INPUT_PIN = 39;
	|D1 :	INPUT_PIN = 38;
	|D0 :	INPUT_PIN = 37;
	|INT_COM :	OUTPUT_PIN = 35;
	|LED_COM3 :	OUTPUT_PIN = 34;
	|LED_COM2 :	OUTPUT_PIN = 33;
	|RLC0 :	OUTPUT_PIN = 30;
	|RLC1 :	OUTPUT_PIN = 29;
	|RLC2 :	OUTPUT_PIN = 27;
	|RLC3 :	OUTPUT_PIN = 26;
	|RLC4 :	OUTPUT_PIN = 25;
	|RLC5 :	OUTPUT_PIN = 24;
	|RLC6 :	OUTPUT_PIN = 23;
	|RLC7 :	OUTPUT_PIN = 22;
	|RLC8 :	OUTPUT_PIN = 21;
	|RLC9 :	OUTPUT_PIN = 19;
	|RLC15 :	OUTPUT_PIN = 18;
	|RLC14 :	OUTPUT_PIN = 16;
	|RLC13 :	OUTPUT_PIN = 15;
	|RLC12 :	OUTPUT_PIN = 14;
	|RLC11 :	OUTPUT_PIN = 12;
	|RLC10 :	OUTPUT_PIN = 11;
	|I/O_C1 :	OUTPUT_PIN = 10;
	|I/O_C0 :	OUTPUT_PIN = 9;
	|E2 :	OUTPUT_PIN = 8;
	|E1 :	OUTPUT_PIN = 7;
	|BEER :	OUTPUT_PIN = 4;
	|AD_B :	OUTPUT_PIN = 3;
	|AD_C :	OUTPUT_PIN = 2;
	|AD_A :	OUTPUT_PIN = 1;
	|EA6 :	OUTPUT_PIN = 70;
	"|74373:17|:17" :	LOCATION = LC52;
	"|74373:17|:18" :	LOCATION = LC74;
	"|74373:18|:16" :	LOCATION = LC71;
	"|74373:18|:17" :	LOCATION = LC68;
	"|74373:18|:18" :	LOCATION = LC66;
	"|74373:17|:12" :	LOCATION = LC122;
	"|74373:17|:13" :	LOCATION = LC124;
	"|74373:17|:14" :	LOCATION = LC98;
	"|74373:17|:15" :	LOCATION = LC100;
	"|74373:17|:19" :	LOCATION = LC119;
	"|74373:18|:12" :	LOCATION = LC116;
	"|74373:18|:13" :	LOCATION = LC127;
	"|74373:18|:14" :	LOCATION = LC112;
	"|74373:18|:15" :	LOCATION = LC103;
	"|74373:18|:19" :	LOCATION = LC114;
	"|74373:3|:12" :	LOCATION = LC96;
	"|74373:3|:13" :	LOCATION = LC106;
	"|74373:3|:14" :	LOCATION = LC108;
	"|74373:3|:15" :	LOCATION = LC111;
END;

INTERNAL_INFO pems800v05
BEGIN
	DEVICE = EPM7128SQC100-6;
	LC88 :	LORAX = G105R0;
	LC125 :	LORAX = G199R0;
	LC21 :	LORAX = G29R0;
	LC17 :	LORAX = G86R0;
	LC30 :	LORAX = G119R0;
	LC110 :	LORAX = G139R0;
	LC101 :	LORAX = G49R0;
	LC128 :	LORAX = G202R0;
	LC43 :	LORAX = G124R0;
	LC41 :	LORAX = G122R0;
	LC40 :	LORAX = G93R0;
	LC38 :	LORAX = G91R0;
	LC33 :	LORAX = G33R0;
	LC35 :	LORAX = G35R0;
	LC37 :	LORAX = G90R0;
	LC45 :	LORAX = G179R0;
	LC46 :	LORAX = G180R0;
	LC65 :	LORAX = G98R0;
	LC64 :	LORAX = G129R0;
	LC59 :	LORAX = "G185R0,PA27R0C3";
	LC118 :	LORAX = "G111R0,PA15R0C7";
	LC105 :	LORAX = "G195R0,PA33R0C6";
	LC56 :	LORAX = "G40R0,PA6R0C3";
	LC85 :	LORAX = "G102R0,PA13R0C5";
	LC70 :	LORAX = "G42R0,PA0R0C4";
	LC83 :	LORAX = "G47R0,PA2R0C5";
	LC49 :	LORAX = "G94R0,PA12R0C3";
	LC113 :	LORAX = "G53R0,PA7R0C7";
	LC73 :	LORAX = "G187R0,PA33R0C4";
	LC78 :	LORAX = "G131R0,PA19R0C4";
	LC97 :	LORAX = "G106R0,PA11R0C6";
	LC107 :	LORAX = "G197R0,PA27R0C6";
	LC121 :	LORAX = "G142R0,PA25R0C7";
	LC53 :	LORAX = "G37R0,PA3R0C3";
	LC69 :	LORAX = "G41R0,PA4R0C4";
	LC109 :	LORAX = "G138R0,PA25R0C6";
	LC104 :	LORAX = "G52R0,PA0R0C6";
	LC86 :	LORAX = "G103R0,PA10R0C5";
	LC123 :	LORAX = G144R0;
	LC115 :	LORAX = G55R0;
	LC117 :	LORAX = G110R0;
	LC126 :	LORAX = G200R0;
	LC94 :	LORAX = G192R0;
	LC120 :	LORAX = G113R0;
	LC91 :	LORAX = G136R0;
	LC93 :	LORAX = G191R0;
	LC89 :	LORAX = "G134R0,PA26R0C5";
	LC77 :	LORAX = "G130R0,PA24R0C4";
	LC102 :	LORAX = "G50R0,PA1R0C6";
	LC114 :	LORAX = "G54R0,PA6R0C7";
	LC82 :	LORAX = "G46R0,PA1R0C1,PA1R0C5";
	LC127 :	LORAX = "G201R0,PA27R0C7";
	LC119 :	LORAX = "G112R0,PA13R0C2,PA13R0C7";
	LC92 :	LORAX = "G137R0,PA23R0C2,PA23R0C5";
	LC98 :	LORAX = "G107R0,PA15R0C2,PA15R0C6";
	OH26R0P9 :	LORAX = "G61R0,PA15R0C4";
	OH28R0P8 :	LORAX = "G3R0,PA0R0C3";
	LC62 :	LORAX = "G127R0,PA26R0C3";
	LC67 :	LORAX = "G100R0,PA12R0C4";
	LC72 :	LORAX = "G44R0,PA6R0C4";
	LC54 :	LORAX = "G38R0,PA7R0C3";
	LC80 :	LORAX = "G133R0,PA23R0C4";
	LC61 :	LORAX = "G126R0,PA24R0C3";
	LC99 :	LORAX = "G108R0,PA12R0C6";
	LC51 :	LORAX = "G96R0,PA10R0C3";
	LC81 :	LORAX = "G45R0,PA4R0C5";
	LC57 :	LORAX = "G183R0,PA33R0C3";
	LC75 :	LORAX = "G189R0,PA34R0C4";
	OH0R0P4 :	LORAX = "G147R0,PA20R0C3,PA20R0C4,PA20R0C5,PA20R0C7,PA20R0C6";
	OH2R0P3 :	LORAX = "G148R0,PA22R0C3,PA22R0C4,PA19R0C5,PA19R0C6,PA22R0C7";
	OH10R0P98 :	LORAX = "G1R0,PA3R0C5,PA3R0C7";
	LC111 :	LORAX = "G140R0,PA18R0C7,PA18R0C3,PA18R0C4,PA18R0C6,PA22R0C5";
	OH12R0P96 :	LORAX = "G57R0,PA17R0C3,PA17R0C6,PA17R0C4";
	OH21R0P12 :	LORAX = "G151R0,PA21R0C5,PA22R0C6";
	LC108 :	LORAX = "G198R0,PA30R0C6,PA30R0C7,PA29R0C3,PA29R0C5,PA30R0C4";
	OH24R0P10 :	LORAX = "G60R0,PA9R0C3,PA9R0C6";
	LC106 :	LORAX = "G196R0,PA28R0C3,PA28R0C5,PA35R0C6,PA35R0C7,PA35R0C4";
	OH7R0P100 :	LORAX = "G206R0,PA32R0C4,PA32R0C6,PA32R0C7";
	LC96 :	LORAX = "G194R0,PA32R0C3,PA32R0C5,PA28R0C4,PA28R0C6,PA28R0C7";
	OH8R0P99 :	LORAX = "G0R0,PA8R0C5,PA8R0C7";
	OH4R0P2 :	LORAX = "G204R0,PA29R0C6,PA29R0C7,PA35R0C3,PA35R0C5,PA29R0C4";
	OH5R0P1 :	LORAX = "G205R0,PA28R0C1,PA28R0C2,PA31R0C6,PA31R0C7";
	OH15R0P94 :	LORAX = "G59R0,PA16R0C3,PA16R0C5,PA16R0C7";
	OH18R0P15 :	LORAX = "G208R0,PA30R0C3,PA30R0C5,PA31R0C4";
	OH13R0P95 :	LORAX = "G58R0,PA14R0C3,PA14R0C4,PA14R0C5";
	OH23R0P11 :	LORAX = "G152R0,PA23R0C7";
	LC84 :	LORAX = "G48R0,PA8R0C1,PA0R0C5";
	LC90 :	LORAX = "G135R0,PA20R0C1,PA18R0C5";
	LC103 :	LORAX = "G51R0,PA3R0C6";
	LC112 :	LORAX = "G141R0,PA21R0C6";
	LC116 :	LORAX = "G56R0,PA1R0C2,PA1R0C7";
	LC87 :	LORAX = "G104R0,PA11R0C2,PA11R0C5";
	LC95 :	LORAX = "G193R0,PA30R0C2,PA33R0C5";
	LC100 :	LORAX = "G109R0,PA9R0C2,PA14R0C6";
	LC124 :	LORAX = "G145R0,PA22R0C2,PA24R0C7";
	LC122 :	LORAX = "G143R0,PA26R0C2,PA26R0C7";
END;

DEFAULT_DEVICES
BEGIN
	AUTO_DEVICE = EPM7256SQC208-7;
	AUTO_DEVICE = EPM7256SRC208-7;
	AUTO_DEVICE = EPM7192SQC160-7;
	AUTO_DEVICE = EPM7160SQC160-6;
	AUTO_DEVICE = EPM7160STC100-6;
	AUTO_DEVICE = EPM7160SLC84-6;
	AUTO_DEVICE = EPM7128SQC160-6;
	AUTO_DEVICE = EPM7128STC100-6;
	AUTO_DEVICE = EPM7128SQC100-6;
	AUTO_DEVICE = EPM7128SLC84-6;
	AUTO_DEVICE = EPM7064STC100-5;
	AUTO_DEVICE = EPM7064SLC84-5;
	AUTO_DEVICE = EPM7064STC44-5;
	AUTO_DEVICE = EPM7064SLC44-5;
	AUTO_DEVICE = EPM7032STC44-5;
	AUTO_DEVICE = EPM7032SLC44-5;
	ASK_BEFORE_ADDING_EXTRA_DEVICES = ON;
END;

TIMING_POINT
BEGIN
	MAINTAIN_STABLE_SYNTHESIS = OFF;
	CUT_ALL_CLEAR_PRESET = ON;
	CUT_ALL_BIDIR = ON;
	DEVICE_FOR_TIMING_SYNTHESIS = EPM7128SQC100-10;
END;

IGNORED_ASSIGNMENTS
BEGIN
	FIT_IGNORE_TIMING = ON;
	DEMOTE_SPECIFIC_LCELL_ASSIGNMENTS_TO_LAB_ASSIGNMENTS = OFF;
	IGNORE_LOCAL_ROUTING_ASSIGNMENTS = OFF;
	IGNORE_DEVICE_ASSIGNMENTS = OFF;
	IGNORE_LC_ASSIGNMENTS = OFF;
	IGNORE_PIN_ASSIGNMENTS = OFF;
	IGNORE_CHIP_ASSIGNMENTS = OFF;
	IGNORE_TIMING_ASSIGNMENTS = OFF;
	IGNORE_LOGIC_OPTION_ASSIGNMENTS = OFF;
	IGNORE_CLIQUE_ASSIGNMENTS = OFF;
END;

GLOBAL_PROJECT_DEVICE_OPTIONS
BEGIN
	MAX7000B_ENABLE_VREFB = OFF;
	MAX7000B_ENABLE_VREFA = OFF;
	MAX7000B_VCCIO_IOBANK2 = 3.3V;
	MAX7000B_VCCIO_IOBANK1 = 3.3V;
	CONFIG_EPROM_PULLUP_RESISTOR = ON;
	CONFIG_EPROM_USER_CODE = FFFFFFFF;
	FLEX_CONFIGURATION_EPROM = AUTO;
	MAX7000AE_ENABLE_JTAG = ON;
	MAX7000AE_USER_CODE = FFFFFFFF;
	FLEX6000_USE_LOW_VOLTAGE_CONFIGURATION_EPROM = OFF;
	FLEX10KA_USE_LOW_VOLTAGE_CONFIGURATION_EPROM = ON;
	FLEX10K_USE_LOW_VOLTAGE_CONFIGURATION_EPROM = OFF;
	FLEX6000_ENABLE_JTAG = OFF;
	CONFIG_SCHEME_FLEX_6000 = PASSIVE_SERIAL;
	MULTIVOLT_IO = OFF;
	MAX7000S_ENABLE_JTAG = ON;
	FLEX10K_ENABLE_LOCK_OUTPUT = OFF;
	MAX7000S_USER_CODE = FFFF;
	CONFIG_SCHEME_10K = PASSIVE_SERIAL;
	FLEX10K_JTAG_USER_CODE = 7F;
	ENABLE_INIT_DONE_OUTPUT = OFF;
	ENABLE_CHIP_WIDE_OE = OFF;
	ENABLE_CHIP_WIDE_RESET = OFF;
	nCEO = UNRESERVED;
	CLKUSR = UNRESERVED;
	ADD17 = UNRESERVED;
	ADD16 = UNRESERVED;
	ADD15 = UNRESERVED;
	ADD14 = UNRESERVED;
	ADD13 = UNRESERVED;
	ADD0_TO_ADD12 = UNRESERVED;
	SDOUT = RESERVED_DRIVES_OUT;
	RDCLK = UNRESERVED;
	RDYnBUSY = UNRESERVED;
	nWS_nRS_nCS_CS = UNRESERVED;
	DATA1_TO_DATA7 = UNRESERVED;
	DATA0 = RESERVED_TRI_STATED;
	FLEX8000_ENABLE_JTAG = OFF;
	CONFIG_SCHEME = ACTIVE_SERIAL;
	DISABLE_TIME_OUT = OFF;
	ENABLE_DCLK_OUTPUT = OFF;
	RELEASE_CLEARS = OFF;
	AUTO_RESTART = OFF;
	USER_CLOCK = OFF;
	SECURITY_BIT = OFF;
	RESERVED_PINS_PERCENT = 0;
	RESERVED_LCELLS_PERCENT = 0;
END;

GLOBAL_PROJECT_SYNTHESIS_ASSIGNMENT_OPTIONS
BEGIN
	MULTI_LEVEL_SYNTHESIS_MAX9000 = ON;
	AUTO_IMPLEMENT_IN_EAB = OFF;
	AUTO_OPEN_DRAIN_PINS = ON;
	ONE_HOT_STATE_MACHINE_ENCODING = OFF;
	AUTO_REGISTER_PACKING = OFF;
	DEVICE_FAMILY = MAX7000S;
	STYLE = NORMAL;
	AUTO_FAST_IO = OFF;
	AUTO_GLOBAL_OE = ON;
	AUTO_GLOBAL_PRESET = ON;
	AUTO_GLOBAL_CLEAR = ON;
	AUTO_GLOBAL_CLOCK = ON;
	MULTI_LEVEL_SYNTHESIS_MAX5000_7000 = OFF;
	OPTIMIZE_FOR_SPEED = 5;
END;

COMPILER_PROCESSING_CONFIGURATION
BEGIN
	PRESERVE_ALL_NODE_NAME_SYNONYMS = OFF;
	FITTER_SETTINGS = NORMAL;
	SMART_RECOMPILE = OFF;
	GENERATE_AHDL_TDO_FILE = OFF;
	RPT_FILE_USER_ASSIGNMENTS = ON;
	RPT_FILE_LCELL_INTERCONNECT = ON;
	RPT_FILE_HIERARCHY = ON;
	RPT_FILE_EQUATIONS = ON;
	LINKED_SNF_EXTRACTOR = OFF;
	OPTIMIZE_TIMING_SNF = OFF;
	TIMING_SNF_EXTRACTOR = ON;
	FUNCTIONAL_SNF_EXTRACTOR = OFF;
	DESIGN_DOCTOR_RULES = FLEX;
	DESIGN_DOCTOR = ON;
END;

COMPILER_INTERFACES_CONFIGURATION
BEGIN
	USE_ADT_PALACE_FOR_MAX = OFF;
	VHDL_WRITER_VERSION = VHDL87;
	VHDL_READER_VERSION = VHDL87;
	SYNOPSYS_MAPPING_EFFORT = MEDIUM;
	SYNOPSYS_BOUNDARY_OPTIMIZATION = OFF;
	SYNOPSYS_HIERARCHICAL_COMPILATION = ON;
	SYNOPSYS_DESIGNWARE = OFF;
	SYNOPSYS_COMPILER = DESIGN;
	USE_SYNOPSYS_SYNTHESIS = OFF;
	VHDL_NETLIST_WRITER = OFF;
	VERILOG_NETLIST_WRITER = OFF;
	XNF_GENERATE_AHDL_TDX_FILE = ON;
	XNF_TRANSLATE_INTERNAL_NODE_NAMES = ON;
	XNF_EMULATE_TRI_STATE_BUSES = INTERNAL_LOGIC;
	EDIF_OUTPUT_VERSION = 200;
	EDIF_NETLIST_WRITER = OFF;
	VERILOG_OUTPUT_MAP_ILLEGAL_CHAR = OFF;
	VERILOG_TRUNCATE_HIERARCHY_PATH = OFF;
	VHDL_TRUNCATE_HIERARCHY_PATH = OFF;
	EDIF_TRUNCATE_HIERARCHY_PATH = OFF;
	VERILOG_FLATTEN_BUS = OFF;
	VHDL_FLATTEN_BUS = OFF;
	VERILOG_OUTPUT_DELAY_CONSTRUCTS = VO_FILE;
	VHDL_OUTPUT_DELAY_CONSTRUCTS = VHO_FILE;
	VHDL_GENERATE_CONFIGURATION_DECLARATION = OFF;
	EDIF_INPUT_LMF1 = *.lmf;
	EDIF_INPUT_LMF2 = *.lmf;
	EDIF_OUTPUT_EDC_FILE = *.edc;
	EDIF_INPUT_VCC = VCC;
	EDIF_INPUT_GND = GND;
	EDIF_OUTPUT_VCC = VCC;
	EDIF_OUTPUT_GND = GND;
	EDIF_INPUT_USE_LMF1 = OFF;