oderk0.err

defequ

Execute(GetConfig(1)) CR := Chr(13) + Chr(10) PP := Chr(34) 
Error in line 4: Syntax error.
autoconfig(x__):=
Error in line 5: Syntax error.
{
Error in line 6: Unrecognized command verb.
If(
Error in line 7: Missing operand.
AskUserYesNo("There is an error in your main input "+
Error in line 8: Missing operand.
"configuration:"+CR+x__+CR+
Error in line 9: Unrecognized command verb.
"Do you want to configure the main input automatically?")==0,
Error in line 10: Unrecognized command verb.
{
Error in line 11: Unrecognized command verb.
Abort(x__) },
Error in line 13: Syntax error.
{
Error in line 14: Unrecognized command verb.
i:=0 While(
Error in line 16: Unrecognized command verb.
{
Error in line 17: Unrecognized command verb.
unknown[i]:=GetUserInput("Enter the "+numtos(i+1)+
Error in line 18: Syntax error.
"th unknown function:") i:=i+1 Asc(unknown[i-1])!=0},
Error in line 21: Unrecognized command verb.
) If(
Error in line 24: Unrecognized command verb.
i==1,
Error in line 25: Unrecognized command verb.
{
Error in line 26: Unrecognized command verb.
Abort("You must enter at least one unknown function.") },
Error in line 28: Syntax error.
) unknown[i-1]:=0 i:=0 computeall:="" While(
Error in line 34: Unrecognized command verb.
{
Error in line 35: Unrecognized command verb.
Valid(unknown[i])==-4
Error in line 36: Command contains unrecognized phrase/keyword.
},
Error in line 37: Unrecognized command verb.
{
Error in line 38: Unrecognized command verb.
computeall:=computeall+"unknown["+numtos(i)+"]:="+
Error in line 39: Unrecognized command verb.
PP+unknown[i]+PP+";"+CR+unknown[i]+"'(t):={"+
Error in line 40: Unrecognized command verb.
GetUserInput("Enter the right hand side of the "+
Error in line 41: Missing operand.
"equation "+unknown[i]+"'(t)=...")+"};"+CR+
Error in line 42: Unrecognized command verb.
unknown[i]+"_:="+
Error in line 43: Syntax error.
GetUserInput("Enter the initial value for the "+
Error in line 44: Missing operand.
"unknown function "+unknown[i]+" :")+";"+
Error in line 45: Unrecognized command verb.
CR i:=i+1 }
Error in line 48: Unrecognized command verb.
) computeall:=computeall+"t0:="+
Error in line 50: Unrecognized command verb.
GetUserInput("Enter the initial time:")+";"+CR+"maxt:="+
Error in line 51: Syntax error.
GetUserInput("Enter the time extent:")+";"+CR+"dt:="+
Error in line 52: Syntax error.
GetUserInput("Enter the time step:")+";"+CR SetConfig(computeall) Abort("The setup is complete."+CR+
Error in line 55: Syntax error.
"Use File/Execute to start again.") }
Error in line 57: Unrecognized command verb.
) } 
Error in line 60: Unrecognized command verb.
If(
Error in line 61: Missing operand.
(Valid(t0)!=-1)
Error in line 62: Unrecognized command verb.
{
Error in line 63: Unrecognized command verb.
autoconfig("You must define the variable t0 as the initial time.") },
Error in line 65: Syntax error.
) 
Error in line 68: Unrecognized command verb.
If(
Error in line 69: Missing operand.
(Valid(dt)!=-1)
Error in line 70: Unrecognized command verb.
{
Error in line 71: Unrecognized command verb.
autoconfig("You must define the variable dt as the step size.") },
Error in line 73: Syntax error.
) 
Error in line 76: Unrecognized command verb.
If(
Error in line 77: Missing operand.
(Valid(maxt)!=-1)
Error in line 78: Unrecognized command verb.
{
Error in line 79: Unrecognized command verb.
autoconfig("You must define the variable maxt as the maximum time.") },
Error in line 81: Syntax error.
) 
Error in line 84: Unrecognized command verb.
If(
Error in line 85: Missing operand.
(Valid(unknown[0])!=-4),
Error in line 86: Unrecognized command verb.
{
Error in line 87: Unrecognized command verb.
autoconfig("You must define the vector unknown[ ] as the names"+
Error in line 88: Missing operand.
" of the unknown functions.") },
Error in line 90: Unrecognized command verb.
) 
Error in line 93: Unrecognized command verb.
t0:=t0*1.0 dt:=dt*1.0 
Error in line 96: Unrecognized command verb.
maxt:=maxt*1.0 
Error in line 98: Unrecognized command verb.
dtper2:=(dt/2)*1.0 dtper6:=(dt/6)*1.0 
Error in line 101: Unrecognized command verb.
t:=t0 i:=0 
Error in line 104: Unrecognized command verb.
While(
Error in line 105: Function name is missing ).
{
Error in line 106: Unrecognized command verb.
Valid(unknown[i])==-4
Error in line 107: Command contains unrecognized phrase/keyword.
},
Error in line 108: Unrecognized command verb.
{
Error in line 109: Unrecognized command verb.
If(
Error in line 110: Missing operand.
((j:=Valid(Execute(unknown[i]+"_")))==-1)||(j==-2),
Error in line 111: Unrecognized command verb.
{
Error in line 112: Unrecognized command verb.
Execute(unknown[i]+":=" +unknown[i]+ "_*1.0;" ) },
Error in line 114: Syntax error.
{
Error in line 115: Unrecognized command verb.
autoconfig("The initial value for "+unknown[i]+
Error in line 116: Missing operand.
" gives a non-numeric value.") }
Error in line 118: Unrecognized command verb.
) i:=i+1 }
Error in line 121: Unrecognized command verb.
) 
Error in line 123: Unrecognized command verb.
computek1:=(computek2:=(computek3:=(computek4:=""))) computestep1:=(computestep2:=(computestep3:=(computes:=""))) computestep:="" i:=0 
Error in line 128: Unrecognized command verb.
While(
Error in line 129: Function name is missing ).
{
Error in line 130: Unrecognized command verb.
Valid(unknown[i])==-4
Error in line 131: Command contains unrecognized phrase/keyword.
},
Error in line 132: Unrecognized command verb.
{
Error in line 133: Unrecognized command verb.
If(
Error in line 134: Missing operand.
Valid(Execute(unknown[i]+"'"))==-16,
Error in line 135: Command contains unrecognized phrase/keyword.
{
Error in line 136: Unrecognized command verb.
If(
Error in line 137: Missing operand.
(Valid(Execute(Execute(unknown[i]+"'")))==-1)||
Error in line 138: Unrecognized command verb.
(Valid(Execute(Execute(unknown[i]+"'")))==-2),
Error in line 139: Unrecognized command verb.
{
Error in line 140: Unrecognized command verb.
computek1 := computek1+"k1_"+Anytos("%ld",i)+
Error in line 141: Unrecognized command verb.
":=execute("+unknown[i]+"');" computestep1 := computestep1 + unknown[i]+ ":=dtper2*k1_"+
Error in line 143: Unrecognized command verb.
Anytos("%ld",i)+"+(xn"+numtos(i)+":="+unknown[i]+ ");" 
Error in line 145: Syntax error.
computek2 := computek2+"k2_"+Anytos("%ld",i)+
Error in line 146: Unrecognized command verb.
":=execute("+unknown[i]+"');" computestep2 := computestep2 + unknown[i]+ ":=dtper2*k2_"+
Error in line 148: Unrecognized command verb.
Anytos("%ld",i)+"+xn;" 
Error in line 150: Syntax error.
computek3 := computek3+"k3_"+Anytos("%ld",i)+
Error in line 151: Unrecognized command verb.
":=execute("+unknown[i]+"');" computestep3 := computestep3 + unknown[i]+ ":=dt*k3_"+
Error in line 153: Unrecognized command verb.
Anytos("%ld",i)+"+xn;" 
Error in line 155: Syntax error.
computek4 := computek4+"k4_"+Anytos("%ld",i)+
Error in line 156: Unrecognized command verb.
":=execute("+unknown[i]+"');" 
Error in line 158: Unrecognized command verb.
computes := computes+"s_"+Anytos("%ld",i)+":=dtper6*(k1_"+
Error in line 159: Unrecognized command verb.
Anytos("%ld",i)+"+k2_"+Anytos("%ld",i)+"+k2_"+
Error in line 160: Syntax error.
Anytos("%ld",i)+"+k3_"+Anytos("%ld",i)+"+k3_"+
Error in line 161: Syntax error.
Anytos("%ld",i)+"+k4_"+Anytos("%ld",i)+");" computestep := computestep + unknown[i]+":=s_"+
Error in line 163: Syntax error.
Anytos("%ld",i)+"+xn"+numtos(i)+ ";" },
Error in line 165: Syntax error.
{
Error in line 166: Unrecognized command verb.
autoconfig("The equation for "+unknown[i]+
Error in line 167: Missing operand.
" gives a non-numeric value.") }
Error in line 169: Unrecognized command verb.
) },
Error in line 171: Unrecognized command verb.
{
Error in line 172: Unrecognized command verb.
If(
Error in line 173: Missing operand.
(Valid(Execute(unknown[i]+"'(t0)"))==-1)||
Error in line 174: Unrecognized command verb.
(Valid(Execute(unknown[i]+"'(t0)"))==-2),
Error in line 175: Unrecognized command verb.
{
Error in line 176: Unrecognized command verb.
computek1 := computek1+"k1_"+
Error in line 177: Unrecognized command verb.
Anytos("%ld",i)+":="+unknown[i]+"'(t);" computestep1 := computestep1 + unknown[i]+ ":=dtper2*k1_"+
Error in line 179: Syntax error.
Anytos("%ld",i)+"+(xn"+numtos(i)+":="+unknown[i]+ ");" 
Error in line 181: Syntax error.
computek2 := computek2+"k2_"+
Error in line 182: Unrecognized command verb.
Anytos("%ld",i)+":="+unknown[i]+"'(t);" computestep2 := computestep2 + unknown[i]+ ":=dtper2*k2_"+
Error in line 184: Syntax error.
Anytos("%ld",i)+"+xn"+numtos(i)+";" 
Error in line 186: Syntax error.
computek3 := computek3+"k3_"+
Error in line 187: Unrecognized command verb.
Anytos("%ld",i)+":="+unknown[i]+"'(t);" computestep3 := computestep3 + unknown[i]+ ":=dt*k3_"+
Error in line 189: Syntax error.
Anytos("%ld",i)+"+xn"+numtos(i)+";" 
Error in line 191: Syntax error.
computek4 := computek4+"k4_"+
Error in line 192: Unrecognized command verb.
Anytos("%ld",i)+":="+unknown[i]+"'(t);" 
Error in line 194: Syntax error.
computes := computes+"s_"+Anytos("%ld",i)+":=dtper6*(k1_"+
Error in line 195: Unrecognized command verb.
Anytos("%ld",i)+"+k2_"+Anytos("%ld",i)+"+k2_"+
Error in line 196: Syntax error.
Anytos("%ld",i)+"+k3_"+Anytos("%ld",i)+"+k3_"+
Error in line 197: Syntax error.
Anytos("%ld",i)+"+k4_"+Anytos("%ld",i)+");" computestep := computestep + unknown[i]+":=s_"+
Error in line 199: Syntax error.
Anytos("%ld",i)+"+xn"+numtos(i)+ ";" },
Error in line 201: Syntax error.
{
Error in line 202: Unrecognized command verb.
autoconfig("The equation for "+unknown[i]+
Error in line 203: Missing operand.
" is not defined or gives a non-numeric value.") }
Error in line 205: Unrecognized command verb.
) }
Error in line 207: Unrecognized command verb.
) i:=i+1 }
Error in line 210: Unrecognized command verb.
) 
Error in line 212: Unrecognized command verb.
j:=1 computeall1:="{"+computek1+computestep1+"t:=t+dtper2;"+computek2+
Error in line 214: Unrecognized command verb.
computestep2+computek3+computestep3+"t:=t+dtper2;"+computek4+computes+
Error in line 215: Unrecognized command verb.
computestep+"UpdateViews(0);j:=j+1;}" computeall:=Execute(computeall1) ExecViewTemplates(1) 
Error in line 219: Unrecognized command verb.
{
Error in line 221: Unrecognized command verb.
maxt:=mt While(
Error in line 223: Unrecognized command verb.
{
Error in line 224: Unrecognized command verb.
t<=maxt
Error in line 225: Unrecognized command verb.
},
Error in line 226: Unrecognized command verb.
computeall
Error in line 227: Unrecognized command verb.
) } 
Error in line 230: Unrecognized command verb.
Error in line 232: An IF | ELSE | ENDIF statement is missing.