mp4liveondebian.faq

完整的RTP RTSP代码库

    =====How to sucessfully compile FAAC and mpeg4ip on Debian WOODY=====
				
				FAQ v1.0


-requirements, pre-installation, suitable environment for building mpeg4ip

let suppose you have installed a basic setup of debian woody 
(the actual 'stable'), updated it from network. First make sure you have a 
complete development system installed. The best way to achieve it is to run 
tasksel and pick 'C and C++' from  developer section. it makes sure that no 
devel component is missing. additionaly you will need SDL libraries so do: 
apt-get install libsdl1.2-dev libsdl1.2debian-all 
apt-get install libsdl-net1.2-dev libsdl-image1.2-dev libsd-gfx1.2-dev

note: 	you DO NOT NEED to install nasm, it would get you into big trouble 
	so better not to have it installed

- first steps,installing Lame and something about FAAC(extrernal audio encoders) 

possibly the easiest step on the rough way to get mp4live working is installing
lame the mp3 encoder. you should get the source from sf.net, both 3.92.x 
and 3.93.x versions will do, normally you should face with no difficulity 
during lame compilation/installation.
(lame soure: http://sourceforge.net/project/showfiles.php?group_id=290)

there are different versions of FAAC available for downloading. also a cvs 
snapshot is released on each sunday. i suggest to use release 1.20.1 of FAAC 
(against the documentation which recommends to use the newest version)
you can try newer versions of FAAC but in that case later you will surely 
meet problems during compiling mp4live (usually 'unknown pragmas error') 
so let's stick to FAAC 1.20.1. Maybe it is hard to get it from offical sources 
but you can get it from my private mpeg4ip-faac collection from:
http://mpeg4ip.netexpert.hu

- avoiding future troubles, doing the tricky part

the default version of 'libtool' available for the stable debian (woody) is 
version 1.4 which is NOT suitable for configuring FAAC perfectly 
(a LOT of unknown options, variables used by FAAC which are unknown for 
libtool1.4). So we will do a little trick, we will install libtool 1.5 which 
is normally for debian Sid (testing version of debian yet). Either you can get 
the standalone .deb from debian.org's package search from the testing(sid) 
section:
http://packages.debian.org/cgi-bin/search_packages.pl?keywords=libtool&searchon=names&subword=1&version=testing&release=all
(it has no further dependencies), or you can modify your /etc/apt/sources.list 
by turning the 'stable' word after the path into 'sid' then apt-get update, 
apt-get install libtool, after it got installed you can reverse the changes you
made in your /etc/apt/sources.list (sid -> stable) and an additional 
apt-get update is recommended just to avoid possible future confusion around 
packages. Okay, so now you have a stable woody with 99% Woody packages except
for libtool which is from Sid (testing), you have the complete dev environment
either gcc 2.95.x or gcc 3.0 maybe both (if u have installed 3.0 manualy).
Both versions are ok for the compiling however 2.95.x is more reliable and 
compatible while 3.0 gives better cpu optimalisations.

note: 	on a powerful cpu i couldnt realise any considerable speed difference 
	with mp4live which could be derived from the version of gcc
	so i simply used 2.95.x. Of course the choice is free :)

<mpeg4ip author's note: we have seen significant improvment in the decoding
 routines with the 3.0 series of GCC, coupled with NASM.  YMMV>

- after the hard part, breath the main thing alive

extract faac (v1.20.1), chmod +x ./bootstrap 
(as the executable flag is accidentally missing)
do ./bootstrap in faac folder 
(it should bring NO error messages thanks to our new libtool)
do ./configure
do make
do make install

now faac is ready, you can test it by typing 'faac' into the shell, 
it brings the help so it is okay (compiling with libtool 1.4 it gives an 
error message as it cant load some of the shared libs which couldnt be 
compiled due to misconfiguration)

NOTE: you MUST manualy copy the faac/include/faac.h to /usr/local/include/
      as it is not done by the broken installer script but needed to complie 
      mp4live (newer versions of FAAC are NOT affected by this small bug 
      but they bring up more problematic things)

<mpeg4ip author - if you use the faac patch file (faac_mpeg4ip_add.tar) before compiling, 
 you won't have to copy the files.  Ditto if you use a later version of faac>

now let's compile mpeg4ip. you must decide if you want to use mp4live with gui 
or only in shell. If you want to have GUI after compilation you must install 
the GTK package (apt-get install libgtk1.2-dev) if not simply skipp this option.
Extract the latest mpeg4ip tar (1.0rc3 at this moment) into a folder
cd to it and do ./bootstarp after it simply type make and finally do 
make install. If all the above is correct mpeg4ip should compile without errors!


If you got any problems, questions or remarks please feel free to write 
me a mail to [e-mail]


EOF