ind.c

ngspice又一个电子CAD仿真软件代码.功能更全

/**********
Copyright 1990 Regents of the University of California.  All rights reserved.
Author: 1985 Thomas L. Quarles
**********/

#include "ngspice.h"
#include "devdefs.h"
#include "ifsim.h"
#include "inddefs.h"
#include "suffix.h"

IFparm INDpTable[] = { /* parameters */ 
 IOPAP("inductance",IND_IND,      IF_REAL, "Inductance of inductor"),
 IOPAU("ic",        IND_IC,       IF_REAL, "Initial current through inductor"),
 IP(   "sens_ind",  IND_IND_SENS, IF_FLAG,
       "flag to request sensitivity WRT inductance"),
 IOPZU("temp",      IND_TEMP,     IF_REAL, "Instance operating temperature"),
 IOPZ( "dtemp",     IND_DTEMP,    IF_REAL,
       "Instance temperature difference with the rest of the circuit"),
 IOPU( "m",         IND_M,        IF_REAL, "Multiplication Factor"),
 IOPU( "scale",     IND_SCALE,    IF_REAL, "Scale factor"),
 IOP(  "nt",        IND_NT,       IF_REAL, "Number of turns"), 	
 OP(   "flux",      IND_FLUX,     IF_REAL, "Flux through inductor"),
 OP(   "v",         IND_VOLT,     IF_REAL, "Terminal voltage of inductor"),
 OPR(  "volt",      IND_VOLT,     IF_REAL, ""),
 OP(   "i",   	    IND_CURRENT,  IF_REAL, "Current through the inductor"),
 OPR(  "current",   IND_CURRENT,  IF_REAL, ""),
 OP(   "p",         IND_POWER,    IF_REAL,
       "instantaneous power dissipated by the inductor"),
 OPU(  "sens_dc",   IND_QUEST_SENS_DC,   IF_REAL, "dc sensitivity sensitivity"),
 OPU(  "sens_real", IND_QUEST_SENS_REAL, IF_REAL, "real part of ac sensitivity"),
 OPU(  "sens_imag", IND_QUEST_SENS_IMAG, IF_REAL, 
       "dc sensitivity and imag part of ac sensitivty"),
 OPU(  "sens_mag",  IND_QUEST_SENS_MAG,  IF_REAL, "sensitivity of AC magnitude"),
 OPU(  "sens_ph",   IND_QUEST_SENS_PH,   IF_REAL, "sensitivity of AC phase"),
 OPU(  "sens_cplx", IND_QUEST_SENS_CPLX, IF_COMPLEX,    "ac sensitivity")
};

IFparm INDmPTable[] = { /* model parameters */
 IOPA(  "ind",    IND_MOD_IND,      IF_REAL,"Model inductance"),
 IOPA(  "tc1",    IND_MOD_TC1,      IF_REAL,"First order temp. coefficient"),
 IOPA(  "tc2",    IND_MOD_TC2,      IF_REAL,"Second order temp. coefficient"),
 IOPXU( "tnom",   IND_MOD_TNOM,     IF_REAL,"Parameter measurement temperature"),
 IOPA(  "csect",  IND_MOD_CSECT,    IF_REAL,"Inductor cross section"),
 IOPA(  "length", IND_MOD_LENGTH,   IF_REAL,"Inductor length"),
 IOPA(  "nt",     IND_MOD_NT,       IF_REAL,"Model number of turns"),
 IOPA(  "mu",     IND_MOD_MU,       IF_REAL,"Relative magnetic permeability"),
 IP(    "l",      IND_MOD_L,        IF_FLAG,"Inductor model")
};


char *INDnames[] = {
    "L+",
    "L-"
};


int	INDnSize = NUMELEMS(INDnames);
int	INDpTSize = NUMELEMS(INDpTable);
int	INDmPTSize = NUMELEMS(INDmPTable);
int	INDiSize = sizeof(INDinstance);
int	INDmSize = sizeof(INDmodel);

#ifdef MUTUAL

IFparm MUTpTable[] = { /* parameters */ 
 IOPAP( "k", MUT_COEFF, IF_REAL    , "Mutual inductance"),
 IOPR( "coefficient", MUT_COEFF, IF_REAL    , ""),
 IOP( "inductor1", MUT_IND1,  IF_INSTANCE, "First coupled inductor"),
 IOP( "inductor2", MUT_IND2,  IF_INSTANCE, "Second coupled inductor"),
 IP( "sens_coeff", MUT_COEFF_SENS, IF_FLAG,    
        "flag to request sensitivity WRT coupling factor"),
 OPU( "sens_dc",   MUT_QUEST_SENS_DC,   IF_REAL, "dc sensitivity "),
 OPU( "sens_real", MUT_QUEST_SENS_REAL, IF_REAL, "real part of ac sensitivity"),
 OPU( "sens_imag", MUT_QUEST_SENS_IMAG, IF_REAL, 
        "dc sensitivity and imag part of ac sensitivty"),
 OPU( "sens_mag", MUT_QUEST_SENS_MAG,  IF_REAL, "sensitivity of AC magnitude"),
 OPU( "sens_ph",  MUT_QUEST_SENS_PH,   IF_REAL, "sensitivity of AC phase"),
 OPU( "sens_cplx",  MUT_QUEST_SENS_CPLX, IF_COMPLEX,  "ac sensitivity")
};

int	MUTnSize = NUMELEMS(INDnames);
int	MUTpTSize = NUMELEMS(MUTpTable);
int	MUTmPTSize = 0;
int	MUTiSize = sizeof(INDinstance);
int	MUTmSize = sizeof(INDmodel);

#endif /*MUTUAL*/