res.c

ngspice又一个电子CAD仿真软件代码.功能更全

/**********
Copyright 1990 Regents of the University of California.  All rights reserved.
Author: 1985 Thomas L. Quarles
Modified: Apr 2000 - Paolo Nenzi
Modified: 2000 AlansFixes
**********/

#include "ngspice.h"
#include "resdefs.h"
#include "devdefs.h"
#include "ifsim.h"

IFparm RESpTable[] = { /* parameters */ 
 IOPP(  "resistance", 	RES_RESIST, 	     IF_REAL,    "Resistance"),
 IOPAA( "ac",		RES_ACRESIST,	     IF_REAL,    "AC resistance value"),
 IOPZU( "temp",		RES_TEMP,	     IF_REAL,    "Instance operating temperature"),
 IOPZ(  "dtemp",	RES_DTEMP,	     IF_REAL,
        "Instance temperature difference with the rest of the circuit"),
 IOPQU( "l",		RES_LENGTH,	     IF_REAL,    "Length"),
 IOPZU( "w",		RES_WIDTH,	     IF_REAL,    "Width"),
 IOPU(  "m",		RES_M,		     IF_REAL,    "Multiplication factor"),
 IOPU(  "tc",		RES_TC1,	     IF_REAL,    "First order temp. coefficient"),
 IOPU(  "tc1",		RES_TC1,	     IF_REAL,    "First order temp. coefficient"),
 IOPU(  "tc2",		RES_TC2,	     IF_REAL,    "Second order temp. coefficient"),
 IOPU(  "scale",	RES_SCALE,	     IF_REAL,    "Scale factor"),
 IOP(   "noisy",        RES_NOISY,           IF_INTEGER, "Resistor generate noise"), 
 IP(    "sens_resist",  RES_RESIST_SENS,     IF_FLAG,   
        "flag to request sensitivity WRT resistance"),
 OP(    "i",            RES_CURRENT,         IF_REAL,    "Current"),
 OP(    "p",            RES_POWER,           IF_REAL,    "Power"),
 OPU(   "sens_dc",      RES_QUEST_SENS_DC,   IF_REAL,    "dc sensitivity "),
 OPU(   "sens_real",    RES_QUEST_SENS_REAL, IF_REAL,    
        "dc sensitivity and real part of ac sensitivity"),
 OPU(   "sens_imag",    RES_QUEST_SENS_IMAG, IF_REAL,    
        "dc sensitivity and imag part of ac sensitivity"),
 OPU(   "sens_mag",    RES_QUEST_SENS_MAG,   IF_REAL,    "ac sensitivity of magnitude"),
 OPU(   "sens_ph",     RES_QUEST_SENS_PH,    IF_REAL,    "ac sensitivity of phase"),
 OPU(   "sens_cplx",   RES_QUEST_SENS_CPLX,  IF_COMPLEX, "ac sensitivity")
};

IFparm RESmPTable[] = { /* model parameters */
 IOPQ(  "rsh",    RES_MOD_RSH,      IF_REAL,"Sheet resistance"),
 IOPZ(  "narrow", RES_MOD_NARROW,   IF_REAL,"Narrowing of resistor"),
 IOPZ(  "short",  RES_MOD_SHORT,    IF_REAL,"Shortening of resistor"),
 IOPQ(  "tc1",    RES_MOD_TC1,      IF_REAL,"First order temp. coefficient"),
 IOPQO( "tc2",    RES_MOD_TC2,      IF_REAL,"Second order temp. coefficient"),
 IOPX(  "defw",   RES_MOD_DEFWIDTH, IF_REAL,"Default device width"),
 IOPQ(  "kf",     RES_MOD_KF,       IF_REAL,"Flicker noise coefficient"),
 IOPQ(  "af",     RES_MOD_AF,       IF_REAL,"Flicker noise exponent"), 
 IOPXU( "tnom",   RES_MOD_TNOM,     IF_REAL,"Parameter measurement temperature"),
 IP(    "r",      RES_MOD_R,        IF_FLAG,"Device is a resistor model")
};

char *RESnames[] = {
    "R+",
    "R-"
};

int	RESnSize = NUMELEMS(RESnames);
int	RESpTSize = NUMELEMS(RESpTable);
int	RESmPTSize = NUMELEMS(RESmPTable);
int	RESiSize = sizeof(RESinstance);
int	RESmSize = sizeof(RESmodel);