examples

ngspice又一个电子CAD仿真软件代码.功能更全

****************************************************************
* Pi attenuator pad.
*   Parameters: R0 = impedance
*               DB = attenuation in dB (positive)
.SUBCKT PIPAD 1 2 { R0 DB }
R1 1 0 {R0*(1+2/(10**(DB/20)-1))}
R2 1 2 {(R0/2)*(10**(DB/20)-10**(DB/-20))}
R3 2 0 {R0*(1+2/(10**(DB/20)-1))}
.ENDS
****************************************************************
* PCB Via inductance + extra L.
*  H = substrate height in inches
*  D = via diameter in inches
*  L = extra inductance in henries.
.SUBCKT VIA 1 2 { H D L }
LV 1 2 {L+
+ 5.08E-9*H*(log((2+sqrt(4+D*D/(H*H)))*H/D)+
+ .75*(D/H-sqrt(4+D*D/(H*H))))}
.ENDS
****************************************************************
*   Voltage-controlled oscillator.
*   Parameters: F  = frequency @ Vc = 0 in Hz
*               KV = tuning sensitivity in Hz/volt
*               A  = peak output amplitude
*               RO = output port resistance
* Connections: Vc  Out
.SUBCKT VCO    20  2 { F KV A RO }
RIN1    20 0 1E12
VSW     30 0 DC 0 PULSE 0 1
RSW     30 0 1E12
BIN     3 0 V=(V(20)+{F/KV})*V(30)
R3      3 0 1E6
GSIN    2 0 22 0 {1/RO}
RSIN    2 0 {RO}
B1      1 0 I=-(V(22)*V(3))
B2      22 0 I=V(1)*V(3)
R2      1 0 1E9
I1      0 1 PULSE {1E-9*A} 0
C2      1 0 {.159154943/KV}
C1      22 0 {.159154943/KV}
R1      22 0 1E9
.ENDS
****************************************************************
*   Ideal Frequency converter.
*   Parameters: F  = Oscillator frequency
*               RI = input port resistance
*               RO = output port resistance
* Connections: In Out
.SUBCKT FCNVT  1  2 { F RI RO }
RIN     1 0 {RI}
VLO     3 0 DC 0 SIN 0 1 {F}
RLO     3 0 1E12
BMIX    0 2 I=(V(1)*V(3))/{RO}
RO      2 0 {RO}
.ENDS
****************************************************************
* Sine wave RF power source.
* Parameters: F = Frequency
*             R = Output resistance
*             P = Power in dBm
*             V = DC (EMF)
.SUBCKT RFGEN 1 2 { F R P V }
*             + -
Is      2 1 DC {V/R} SIN {V/R} {sqrt((10**(P/10))/(125*R))} {F}
Ro      1 2 {R}
.ENDS
****************************************************************
* Sine wave 2-tone RF power source.
* Parameters: F1 = 1st tone frequency
*             F2 = 2nd tone frequency
*             R  = output resistance
*             P  = power per tone in dBm
*             V = DC (EMF)
.SUBCKT 2TGEN 1 2 { F1 F2 R P V }
*             + -
I1      2 1 DC {V/R} SIN {V/R} {sqrt((10**(P/10))/(125*R))} {F1}
I2      2 1 DC 0 SIN 0 {sqrt((10**(P/10))/(125*R))} {F2}
Ro      1 2 {R}
.ENDS
****************************************************************
* Transmission lines
* All ports must have external connections.
*   Parameters: Z0  = impedance
*               L   = length in inches
*               VP  = velocity-of-propagation rel. to air
* Connections: 1+ 1- 2+ 2-
.SUBCKT TXL    1  2  3  4 { Z0 L VP }
T1 1 2 3 4 Z0={Z0} TD={L/(1.180315E10*VP)}
.ENDS
****************************************************************
* Lossy transmission line.
* All ports must have external connections.
*   Parameters: Z0  = impedance
*               L   = length in inches
*               VP  = velocity-of-propagation rel. to air
*               A   = loss in dB/inch
* Connections: 1+ 1- 2+ 2-
.SUBCKT LTXL   1  2  3  4 { Z0 L VP A }
O1      1 2 3 4 LOSSY
.MODEL LOSSY LTRA LEN={L}
+ R={5.848492e-3*A*Z0}
+ L={Z0/(1.180315E10*VP)}
+ C={1/(1.180315E10*VP*Z0)}
.ENDS
****************************************************************
* 2 coupled transmission lines
* All ports must have external connections.
*   Parameters: Z0E = even-mode impedance
*               Z0O = odd-mode impedance
*               L   = length in inches
*               VP  = velocity-of-propagation rel. to air
* Connections: 1+ 1- 2+ 2- { Z0E Z0O L VP }
.SUBCKT CPL2   1  2  3  4
T1 1 0 3 0 Z0={Z0E} TD={L/(1.180315E10*VP)}
T2 1 2 3 4 Z0={2*Z0E*Z0O/(Z0E-Z0O)} TD={L/(1.180315E10*VP)}
T3 2 0 4 0 Z0={Z0E} TD={L/(1.180315E10*VP)}
.ENDS
****************************************************************
* Generic Bipolar OpAmp - linear model
*   Parameters: G   = open-loop gain in dB
*               FT  = unity gain frequency in Hz
*               IOS = input offset current in amps
*               VOS = input offset voltage
*               IB  = input bias current in amps
.SUBCKT BIPOPA 2    3  6   7   4    { G FT IOS VOS IB }
*              - In + Out Vcc Vee
RP 4 7 10K
RXX 4 0 10MEG
IBP 3 0 {IB-IOS}
RIP 3 0 10MEG
CIP 3 0 1.4PF
IBN 2 0 {IB}
RIN 2 0 10MEG
CIN 2 0 1.4PF
VOFST 2 10 {VOS}
RID 10 3 200K
EA 11 0 10 3 1
R1 11 12 5K
R2 12 13 50K
C1 12 0 {13E-6/FT}
GA 0 14 0 13 {0.0135*(10**(G/20))}
C2 13 14 {2.7E-6/FT}
RO 14 0 75
L 14 6 {30/FT}
RL 14 6 1000
CL 6 0 3PF
.ENDS
****************************************************************
* Generic FET OpAmp - linear model
*   Parameters: G   = open-loop gain in dB
*               FT  = unity gain frequency in Hz
*               VOS = input offset voltage
.SUBCKT FETOPA 2    3  6   7   4    { G FT VOS }
*              - In + Out Vcc Vee
RP 4 7 6K
RXX 4 0 10MEG
IBP 3 0 33E-12
RIP 3 0 1E12
CIP 3 0 3PF
IBN 2 0 30E-12
RIN 2 0 1E12
CIN 2 0 3PF
VOFST 2 10 {VOS}
RID 10 3 1E12
EA 11 0 10 3 1
R1 11 12 5K
R2 12 13 50K
C1 12 0 {24E-6/FT}
GA 0 14 0 13 {0.0135*(10**(G/20))}
C2 13 14 {2.33E-6/FT}
RO 14 0 75
L 14 6 {4E-6/FT}
RL 14 6 100
CL 6 0 3PF
.ENDS
****************************************************************