nbfm_tx.py

gnuradio软件无线电源程序.现在的手机多基于软件无线电

#
# Copyright 2005 Free Software Foundation, Inc.
# 
# This file is part of GNU Radio
# 
# GNU Radio is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2, or (at your option)
# any later version.
# 
# GNU Radio is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
# GNU General Public License for more details.
# 
# You should have received a copy of the GNU General Public License
# along with GNU Radio; see the file COPYING.  If not, write to
# the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
# Boston, MA 02111-1307, USA.
# 

import math
from gnuradio import gr, optfir
from gnuradio.blksimpl.fm_emph import fm_preemph

class nbfm_tx(gr.hier_block):
    def __init__(self, fg, audio_rate, quad_rate, tau=75e-6, max_dev=5e3):
        """
        Narrow Band FM Transmitter.

        Takes a single float input stream of audio samples in the range [-1,+1]
        and produces a single FM modulated complex baseband output.

        @param fg: flow graph
        @param audio_rate: sample rate of audio stream, >= 16k
        @type audio_rate: integer
        @param quad_rate: sample rate of output stream
        @type quad_rate: integer
        @param tau: preemphasis time constant (default 75e-6)
        @type tau: float
        @param max_dev: maximum deviation in Hz (default 5e3)
        @type max_dev: float

        quad_rate must be an integer multiple of audio_rate.
        """
        
        # FIXME audio_rate and quad_rate ought to be exact rationals
        audio_rate = int(audio_rate)
        quad_rate = int(quad_rate)

        if quad_rate % audio_rate != 0:
            raise ValueError, "quad_rate is not an integer multiple of audio_rate"

        interp_factor = quad_rate / audio_rate
        interp_taps = optfir.low_pass (interp_factor,   # gain
                                       quad_rate,       # Fs
                                       4500,            # passband cutoff
                                       7000,            # stopband cutoff
                                       0.1, 		# passband ripple dB
                                       40)              # stopband atten dB

        print "len(interp_taps) =", len(interp_taps)

        self.interpolator = gr.interp_fir_filter_fff (interp_factor, interp_taps)
        self.preemph = fm_preemph (fg, quad_rate, tau=tau)
        
        k = 2 * math.pi * max_dev / quad_rate
        self.modulator = gr.frequency_modulator_fc (k)

        fg.connect (self.interpolator, self.preemph, self.modulator)
        gr.hier_block.__init__(self, fg, self.interpolator, self.modulator)