templates

电源管理程序

Template: apmd/etc-apmd-md5
Type: string
Default: not-present
Description: Internal variable to hold MD5 checksum of config file.

Template: apmd/suspend-on-ac
Type: boolean
Default: true
Description: Accept system suspend/standby events on AC power?
 If you want to accept system suspend or system standby APM requests
 when the computer is running on AC power, answer "yes" here.
 Otherwise, answer "no" to indicate that such requests should be
 rejected.  When the computer is running on battery power, these
 requests are always accepted.
 .
 System suspend/standby events are usually generated when the BIOS
 automatically suspends because the machine has been idle for a while.
 They can also be generated when you press the "suspend" or "sleep"
 button on the computer.

Template: apmd/hdparm-drive
Type: string
Default: /dev/hda
Description: Device file of hard drive to set timeout on
 apmd(8) can automatically set the "spindown" time of an IDE hard disk
 when the computer is on battery power.  Setting the spindown time to
 a small value will cause the disk to stop spinning after it has been
 idle for that long, which conserves power.  If you want apmd(8) to do
 this, specify the device file for your hard disk here.  (You must
 have the hdparm package installed to do this.)  If you don't want
 your disk managed in this way, answer "none".

Template: apmd/hdparm-spindown
Type: string
Default: 18
Description: Hard-drive spindown timeout to use on battery power
 This value specifies how long the hard drive must be idle before it
 is stopped.  The number specified here has a complicated encoding;
 see the hdparm(8) man page for full details.  For short timeouts of
 20 minutes or less, specify an integer between 1 and 240, which is
 multiplied by 5 to get the number of idle seconds.  For example, a
 value of 18 means 90 seconds.  A value of 0 disables the timeout
 feature.