a7125reg.h

A7125无线模块

/********************************************************************
*   A7125REG.h
*   RF Chip-A7125 Hardware Definitions
*
*   This file provides the constants associated with the
*   AMICCOM A7125 device.
*
********************************************************************/
#ifndef _A7125REG_h_
#define _A7125REG_h_

#define MODE_REG            0x00
#define MODECTRL_REG        0x01
#define CALIBRATION_REG     0x02
#define FIFO1_REG           0x03
#define FIFO2_REG           0x04
#define FIFO_REG            0x05
#define IDCODE_REG          0x06
#define RCOSC1_REG          0x07
#define RCOSC2_REG          0x08
#define RCOSC3_REG          0x09
#define CKO_REG             0x0A
#define GPIO1_REG           0x0B
#define GPIO2_REG           0x0C
#define DATARATE_REG        0x0D
#define PLL1_REG            0x0E
#define PLL2_REG            0x0F
#define PLL3_REG            0x10
#define PLL4_REG            0x11
#define PLL5_REG            0x12
#define CHGROUP1            0x13
#define CHGROUP2            0x14
#define TX1_REG             0x15
#define TX2_REG             0x16
#define DELAY1_REG          0x17
#define DELAY2_REG          0x18
#define RX_REG              0x19
#define RXGAIN1_REG         0x1A
#define RXGAIN2_REG         0x1B
#define RXGAIN3_REG         0x1C
#define RXGAIN4_REG         0x1D
#define RSSI_REG            0x1E
#define ADC_REG             0x1F
#define CODE1_REG           0x20
#define CODE2_REG           0x21
#define CODE3_REG           0x22
#define IFCAL1_REG          0x23
#define IFCAL2_REG          0x24
#define VCOCCAL_REG         0x25
#define VCOCAL1_REG         0x26
#define VCOCAL2_REG         0x27
#define VCODEVCAL1_REG      0x28
#define VCODEVCAL2_REG      0x29
#define VCODEVCAL3_REG      0x2A
#define VCOMODDELAY_REG     0x2B
#define BATTERY_REG         0x2C
#define TXTEST_REG          0x2D
#define RXDEM1_REG          0x2E
#define RXDEM2_REG          0x2F
#define CPC1_REG            0x30
#define CPC2_REG            0x31
#define CRYSTALTEST_REG     0x32
#define PLLTEST_REG         0x33
#define VCOTEST_REG         0x34
#define RFANALOG_REG        0x35
#define IFAT_REG            0x36
#define CHSELECT_REG        0x37
#define VRB_REG             0x38

//strobe command
#define CMD_SLEEP       0x80    //1000,xxxx SLEEP mode
#define CMD_IDLE        0x90    //1001,xxxx IDLE mode
#define CMD_STBY        0xA0    //1010,xxxx Standby mode
#define CMD_PLL         0xB0    //1011,xxxx PLL mode
#define CMD_RX          0xC0    //1100,xxxx RX mode
#define CMD_TX          0xD0    //1101,xxxx TX mode
#define CMD_TFR         0xE0    //1110,xxxx TX FIFO reset
#define CMD_RFR         0xF0    //1111,xxxx RX FIFO reset

#endif