a7125reg.h

A7125无线模块

/********************************************************************
*   A7102REG.h
*   RF Chip-A7102 Hardware Definitions
*
*   This file provides the constants associated with the
*   AMICCOM A7102 device.
*
********************************************************************/
#ifndef _A7125REG_h_
#define _A7125REG_h_

#define MODE_REG 			0x00
#define MODECTRL_REG		0x01
#define CALIBRATION_REG		0x02
#define FIFO1_REG 			0x03
#define FIFO2_REG 			0x04
#define FIFO_REG 			0x05
#define IDCODE_REG 			0x06
#define RCOSC1_REG 			0x07
#define RCOSC2_REG 			0x08
#define RCOSC3_REG 			0x09
#define CKO_REG 			0x0A
#define GPIO1_REG 			0x0B
#define GPIO2_REG 			0x0C
#define DATARATE_REG		0x0D
#define PLL1_REG 			0x0E
#define PLL2_REG			0x0F
#define PLL3_REG 			0x10
#define PLL4_REG			0x11
#define PLL5_REG 			0x12
#define CHGROUP1            0x13
#define CHGROUP2            0x14
#define TX1_REG  			0x15
#define TX2_REG  			0x16
#define DELAY1_REG			0x17
#define DELAY2_REG			0x18
#define RX_REG				0x19
#define RXGAIN1_REG			0x1A
#define RXGAIN2_REG			0x1B
#define RXGAIN3_REG			0x1C
#define RXGAIN4_REG			0x1D
#define RSSI_REG			0x1E
#define ADC_REG  			0x1F
#define CODE1_REG 			0x20
#define CODE2_REG 			0x21
#define CODE3_REG 			0x22
#define IFCAL1_REG  		0x23
#define IFCAL2_REG  		0x24
#define VCOCCAL_REG  		0x25
#define VCOCAL1_REG  		0x26
#define VCOCAL2_REG  		0x27
#define VCODEVCAL1_REG      0x28
#define VCODEVCAL2_REG      0x29
#define VCODEVCAL3_REG      0x2A
#define VCOMODDELAY_REG     0x2B
#define BATTERY_REG  		0x2C
#define TXTEST_REG  		0x2D
#define RXDEM1_REG  		0x2E
#define RXDEM2_REG  		0x2F
#define CPC1_REG			0x30
#define CPC2_REG			0x31
#define CRYSTALTEST_REG		0x32
#define PLLTEST_REG   		0x33
#define VCOTEST_REG 		0x34
#define RFANALOG_REG 		0x35
#define IFAT_REG 			0x36
#define CHSELECT_REG 	    0x37
#define VRB_REG 		    0x38

//strobe command
#define CMD_SLEEP		0x80	//1000,xxxx	SLEEP mode
#define CMD_IDLE		0x90	//1001,xxxx	IDLE mode
#define CMD_STBY		0xA0	//1010,xxxx Standby mode
#define CMD_PLL			0xB0	//1011,xxxx	PLL mode
#define CMD_RX			0xC0	//1100,xxxx	RX mode
#define CMD_TX			0xD0	//1101,xxxx	TX mode
#define CMD_TFR			0xE0	//1110,xxxx	TX FIFO reset
#define CMD_RFR			0xF0	//1111,xxxx	RX FIFO reset

#endif