fet140_wdt_02.asm

来自「我自己在别人基础上改写的MSP430F410_2部分的汇编代码」· 汇编 代码 · 共 50 行

;******************************************************************************
;   MSP-FET430P140 Demo - WDT, Toggle P1.0, Interval Overflow ISR, 32kHz ACLK
;
;   Description: Toggle P1.0 using software timed by WDT ISR. Toggle rate is
;   exactly 250ms based on 32kHz ACLK WDT clock source.  In this example the
;   WDT is configured to divide 32768 watch-crystal(2^15) by 2^13 with an ISR
;   triggered @ 4Hz.
;   ACLK = LFXT1 = 32768, MCLK = SMCLK = DCO ~ 800kHz
;   ;* External watch crystal installed on XIN XOUT is required for ACLK *//	
;
;                 MSP430F149
;             -----------------
;         /|\|              XIN|-
;          | |                 | 32kHz
;          --|RST          XOUT|-
;            |                 |
;            |             P1.0|-->LED
;
;   M. Buccini / G. Morton
;   Texas Instruments Inc.
;   May 2005
;   Built with Code Composer Essentials Version: 1.0
;******************************************************************************
 .cdecls C,LIST,  "msp430x14x.h"
;-----------------------------------------------------------------------------
            .text                           ; Program Start
;-----------------------------------------------------------------------------
RESET       mov.w   #0A00h,SP               ; Initialize stackpointer
SetupWDT    mov.w   #WDT_ADLY_250,&WDTCTL   ; WDT 250ms, ACLK, interval timer
            bis.b   #WDTIE,&IE1             ; Enable WDT interrupt
SetupP1     bis.b   #001h,&P1DIR            ; P1.0 output
                                            ;													
Mainloop    bis.w   #LPM3+GIE,SR            ; Enter LPM3, interrupts enabled
            nop                             ; Required only for debugger
                                            ;
;-----------------------------------------------------------------------------
WDT_ISR;    Toggle P1.0
;-----------------------------------------------------------------------------
            xor.b   #001h,&P1OUT            ; Toggle P1.0
            reti                            ;		
                                            ;
;-----------------------------------------------------------------------------
;           Interrupt Vectors
;-----------------------------------------------------------------------------
            .sect   ".reset"                ; MSP430 RESET Vector
            .short  RESET                   ;
            .sect   ".int10"                ; WDT Vector
            .short  WDT_ISR                 ;
            .end