makefile.in

基于SDL的一个多硬件平台mp3播放器.含解码器源码,可适应平台有X86,ARM,MIPS,PowerPC.

	$(MAKE) $(srcdir)/stamp-h.in; \
	else :; fi
$(srcdir)/stamp-h.in: $(top_srcdir)/configure.in $(ACLOCAL_M4) 
	cd $(top_srcdir) && $(AUTOHEADER)
	@echo timestamp > $(srcdir)/stamp-h.in 2> /dev/null

mostlyclean-hdr:

clean-hdr:

distclean-hdr:
	-rm -f config.h

maintainer-clean-hdr:

# This directory's subdirectories are mostly independent; you can cd
# into them and run `make' without going through this Makefile.
# To change the values of `make' variables: instead of editing Makefiles,
# (1) if the variable is set in `config.status', edit `config.status'
#     (which will cause the Makefiles to be regenerated when you run `make');
# (2) otherwise, pass the desired values on the `make' command line.

@SET_MAKE@

all-recursive install-data-recursive install-exec-recursive \
	installdirs-recursive install-recursive uninstall-recursive  \
	check-recursive installcheck-recursive info-recursive dvi-recursive:
	@set fnord $(MAKEFLAGS); amf=$$2; \
	dot_seen=no; \
	target=`echo $@ | sed s/-recursive//`; \
	list='$(SUBDIRS)'; for subdir in $$list; do \
	echo "Making $$target in $$subdir"; \
	if test "$$subdir" = "."; then \
	dot_seen=yes; \
	local_target="$$target-am"; \
	else \
	local_target="$$target"; \
	fi; \
	(cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
	|| case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
	done; \
	if test "$$dot_seen" = "no"; then \
	$(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
	fi; test -z "$$fail"

mostlyclean-recursive clean-recursive distclean-recursive \
	maintainer-clean-recursive:
	@set fnord $(MAKEFLAGS); amf=$$2; \
	dot_seen=no; \
	rev=''; list='$(SUBDIRS)'; for subdir in $$list; do \
	rev="$$subdir $$rev"; \
	test "$$subdir" != "." || dot_seen=yes; \
	done; \
	test "$$dot_seen" = "no" && rev=". $$rev"; \
	target=`echo $@ | sed s/-recursive//`; \
	for subdir in $$rev; do \
	echo "Making $$target in $$subdir"; \
	if test "$$subdir" = "."; then \
	local_target="$$target-am"; \
	else \
	local_target="$$target"; \
	fi; \
	(cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
	|| case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
	done && test -z "$$fail"
tags-recursive:
	list='$(SUBDIRS)'; for subdir in $$list; do \
	test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
	done

tags: TAGS

ID: $(HEADERS) $(SOURCES) $(LISP)
	list='$(SOURCES) $(HEADERS)'; \
	unique=`for i in $$list; do echo $$i; done | \
	awk '    { files[$$0] = 1; } \
	END { for (i in files) print i; }'`; \
	here=`pwd` && cd $(srcdir) \
	&& mkid -f$$here/ID $$unique $(LISP)

TAGS: tags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) $(LISP)
	tags=; \
	here=`pwd`; \
	list='$(SUBDIRS)'; for subdir in $$list; do \
	if test "$$subdir" = .; then :; else \
	test -f $$subdir/TAGS && tags="$$tags -i $$here/$$subdir/TAGS"; \
	fi; \
	done; \
	list='$(SOURCES) $(HEADERS)'; \
	unique=`for i in $$list; do echo $$i; done | \
	awk '    { files[$$0] = 1; } \
	END { for (i in files) print i; }'`; \
	test -z "$(ETAGS_ARGS)config.h.in$$unique$(LISP)$$tags" \
	|| (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags config.h.in $$unique $(LISP) -o $$here/TAGS)

mostlyclean-tags:

clean-tags:

distclean-tags:
	-rm -f TAGS ID

maintainer-clean-tags:

distdir = $(PACKAGE)-$(VERSION)
top_distdir = $(distdir)

# This target untars the dist file and tries a VPATH configuration.  Then
# it guarantees that the distribution is self-contained by making another
# tarfile.
distcheck: dist
	-rm -rf $(distdir)
	GZIP=$(GZIP_ENV) $(TAR) zxf $(distdir).tar.gz
	mkdir $(distdir)/=build
	mkdir $(distdir)/=inst
	dc_install_base=`cd $(distdir)/=inst && pwd`; \
	cd $(distdir)/=build \
	&& ../configure --srcdir=.. --prefix=$$dc_install_base \
	&& $(MAKE) $(AM_MAKEFLAGS) \
	&& $(MAKE) $(AM_MAKEFLAGS) dvi \
	&& $(MAKE) $(AM_MAKEFLAGS) check \
	&& $(MAKE) $(AM_MAKEFLAGS) install \
	&& $(MAKE) $(AM_MAKEFLAGS) installcheck \
	&& $(MAKE) $(AM_MAKEFLAGS) dist
	-rm -rf $(distdir)
	@banner="$(distdir).tar.gz is ready for distribution"; \
	dashes=`echo "$$banner" | sed s/./=/g`; \
	echo "$$dashes"; \
	echo "$$banner"; \
	echo "$$dashes"
dist: distdir
	-chmod -R a+r $(distdir)
	GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
	-rm -rf $(distdir)
dist-all: distdir
	-chmod -R a+r $(distdir)
	GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
	-rm -rf $(distdir)
distdir: $(DISTFILES)
	-rm -rf $(distdir)
	mkdir $(distdir)
	-chmod 777 $(distdir)
	@for file in $(DISTFILES); do \
	d=$(srcdir); \
	if test -d $$d/$$file; then \
	cp -pr $$d/$$file $(distdir)/$$file; \
	else \
	test -f $(distdir)/$$file \
	|| ln $$d/$$file $(distdir)/$$file 2> /dev/null \
	|| cp -p $$d/$$file $(distdir)/$$file || :; \
	fi; \
	done
	for subdir in $(SUBDIRS); do \
	if test "$$subdir" = .; then :; else \
	test -d $(distdir)/$$subdir \
	|| mkdir $(distdir)/$$subdir \
	|| exit 1; \
	chmod 777 $(distdir)/$$subdir; \
	(cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir=../$(distdir) distdir=../$(distdir)/$$subdir distdir) \
	|| exit 1; \
	fi; \
	done
	$(MAKE) $(AM_MAKEFLAGS) top_distdir="$(top_distdir)" distdir="$(distdir)" dist-hook
info-am:
info: info-recursive
dvi-am:
dvi: dvi-recursive
check-am: all-am
check: check-recursive
installcheck-am:
installcheck: installcheck-recursive
all-recursive-am: config.h
	$(MAKE) $(AM_MAKEFLAGS) all-recursive

install-exec-am:
install-exec: install-exec-recursive

install-data-am:
install-data: install-data-recursive

install-am: all-am
	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
install: install-recursive
uninstall-am:
uninstall: uninstall-recursive
all-am: Makefile config.h
all-redirect: all-recursive-am
install-strip:
	$(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install
installdirs: installdirs-recursive
installdirs-am:


mostlyclean-generic:

clean-generic:

distclean-generic:
	-rm -f Makefile $(CONFIG_CLEAN_FILES)
	-rm -f config.cache config.log stamp-h stamp-h[0-9]*

maintainer-clean-generic:
	-test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
mostlyclean-am:  mostlyclean-hdr mostlyclean-tags mostlyclean-generic

mostlyclean: mostlyclean-recursive

clean-am:  clean-hdr clean-tags clean-generic mostlyclean-am

#>- clean: clean-recursive
#>+ 1
clean: kde-rpo-clean  clean-recursive

distclean-am:  distclean-hdr distclean-tags distclean-generic clean-am
	-rm -f libtool

distclean: distclean-recursive
	-rm -f config.status

maintainer-clean-am:  maintainer-clean-hdr maintainer-clean-tags \
	maintainer-clean-generic distclean-am
	@echo "This command is intended for maintainers to use;"
	@echo "it deletes files that may require special tools to rebuild."

maintainer-clean: maintainer-clean-recursive
	-rm -f config.status

.PHONY: mostlyclean-hdr distclean-hdr clean-hdr maintainer-clean-hdr \
	install-data-recursive uninstall-data-recursive install-exec-recursive \
	uninstall-exec-recursive installdirs-recursive uninstalldirs-recursive \
	all-recursive check-recursive installcheck-recursive info-recursive \
	dvi-recursive mostlyclean-recursive distclean-recursive clean-recursive \
	maintainer-clean-recursive tags tags-recursive mostlyclean-tags \
	distclean-tags clean-tags maintainer-clean-tags distdir info-am info \
	dvi-am dvi check check-am installcheck-am installcheck all-recursive-am \
	install-exec-am install-exec install-data-am install-data install-am \
	install uninstall-am uninstall all-redirect all-am all installdirs-am \
	installdirs mostlyclean-generic distclean-generic clean-generic \
	maintainer-clean-generic clean mostlyclean distclean maintainer-clean


$(top_srcdir)/configure.in: configure.in.in $(top_srcdir)/subdirs
	cd $(top_srcdir) && $(MAKE) -f admin/Makefile.common configure.in ;

$(top_srcdir)/subdirs:
	cd $(top_srcdir) && $(MAKE) -f admin/Makefile.common subdirs

$(top_srcdir)/acinclude.m4: $(top_srcdir)/admin/acinclude.m4.in $(top_srcdir)/special.m4.in $(top_srcdir)/admin/libtool.m4.in
	@cd $(top_srcdir) && cat admin/acinclude.m4.in special.m4.in admin/libtool.m4.in > acinclude.m4

package-messages:
	$(MAKE) -f admin/Makefile.common package-messages

dist-hook:
	cd $(top_distdir) && perl admin/am_edit -padmin
	cd $(top_distdir) && $(MAKE) -f admin/Makefile.common subdirs

# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT:

#>+ 2
docs-am:

#>+ 5
force-reedit:
		cd $(top_srcdir) && $(AUTOMAKE) --foreign --include-deps ./Makefile
	cd $(top_srcdir) && perl admin/am_edit Makefile.in


#>+ 2
final:
	$(MAKE) all-am
#>+ 2
final-install:
	$(MAKE) install-am
#>+ 2
no-final:
	$(MAKE) all-am
#>+ 2
no-final-install:
	$(MAKE) install-am
#>+ 3
cvs-clean:
	$(MAKE) -f $(top_srcdir)/admin/Makefile.common cvs-clean

#>+ 3
kde-rpo-clean:
	-rm -f *.rpo