info.txt

来自「wince下的源代码集合打包」· 文本 代码 · 共 134 行

	@topic     RNAApp |
		This program is used to create and maintain a RAS connection.

	The RNAApp.exe program will attempt to create a RAS connection.

	Usage:
	RNAAPP [-n -p -m -cNUM] -eENTRYNAME

	Option		Description
	-n			Disables most error message boxes, used when calling
				application will display the error values
	-p			By default it will prompt for username/password for
				dial-up entries, if this is specified it will skip the initial
				prompt
	-m			Minimize on connection.
	-cNUM		Set the context value to NUM (this should be a HEX value,
				eg. -c54AF)
	-eENTRYNAME	The name of the RASEntry to use.  If the name contains any
				embedded spaces then this should be enclosed in double quotes.

	Examples:
	rnaapp -m -eDirect
	rnaapp -e"Name with spaces"


	RNAApp will send a broadcast message to all applications when a
	connection succeeds (or fails).  This broadcast message is sent as follows:

	
	SendNotifyMessage( HWND_BROADCAST, WM_NETCONNECT, (WPARAM)TRUE,
		(LPARAM)&v_RNAAppInfo );

	The wParam of the message is a boolean that indicates either connection
	success (TRUE) or termination of the connection (FALSE).	

	The lParam of the message is a pointer to the following structure
	(defined in ras.h):
	
	typedef struct tagRNAAppInfo {
		DWORD	dwSize;					// The size of this structure
		DWORD	hWndRNAApp;				// The handle of the RNAApp window
		DWORD	Context;				// Context value specified on CmdLine
		DWORD	ErrorCode;				// Last error code
		TCHAR	RasEntryName[RAS_MaxEntryName+1];
	} RNAAPP_INFO, *PRNAAPP_INFO;

	The structure elements are defined as follows:

	dwSize		Size of the structure, to be certain of tracking version
				changes you should compare this against the
				sizeof(RNAAPP_INFO).
	hWndRNAApp	The window handle of the RNAApp program (see below).
	Context		The context specified on the command line.
	ErrorCode	The error code (only valid if wParam == FALSE). See below for
				the list of error codes.
	RasEntryName The RAS entry name specified on the command line.

	Error Codes (defined in raserror.h)
	ERROR_PORT_DISCONNECTED
		After sucessfully connecting the port was disconnected.
	ERROR_NO_CARRIER
		No carrier was detected by the modem.
	ERROR_NO_DIALTONE
		No dialtone was detected by the modem (not all modems support this).
	ERROR_DEVICE_NOT_READY
		The device is not ready (for PCMCIA modems the device might not be
		inserted).
	ERROR_LINE_BUSY
		The modem detected a busy signal.
	ERROR_NO_ANSWER
		No one answered the phone
	ERROR_POWER_OFF
		The serial device returned indication that power had been turned off.
	ERROR_POWER_OFF_CD
		The serial device returned indication that power had been turned off,
		and that Carrier Detect was currently asserted.  This is an indication
		that we are still in the docking station.
	ERROR_USER_DISCONNECTION
		The user has disconnected the connection (by pressing the
		disconnect/cancel button)
	ERROR_DISCONNECTION
		Disconnected for an unknow reason.
	ERROR_INVALID_PARAMETER
		Invalid or missing parameter.  The -e parameter is required.
	ERROR_STATE_MACHINES_ALREADY_STARTED
		The system cannot establish another RAS connection
	ERROR_CANNOT_FIND_PHONEBOOK_ENTRY
		Unable to find specified RAS entry.
	ERROR_EVENT_INVALID
		Internal error.
				

	Sending messages to the RNAApp.
		The calling application can send messages to RNAApp.  These should
		be sent in the form:
		
		SendMessage (hWnd, RNA_RASCMD, <CMD>, <INFO>);

		Where <CMD> is one of the following:
		RNA_ADDREF	Add a reference to the current connection. <INFO> should
					be 0.
		RNA_DELREF	Delete a reference to the current connection.  If the
					reference count is decremented to zero then the
					connection is dropped as if the user had selected
					Disconnect. <INFO> should be 0.
		RNA_GETINFO	Will send a WM_NETCONNET message to the window specified
					in the <INFO> parameter.  This allows an application to
					inquire what the entryname of this instance of RNAApp is.

		Finding instances of RNAApp.exe.  By creating a function as follows:

		BOOL FindRNAAppWindow(HWND hWnd, LPARAM lParam)
		{
			TCHAR  	szClassName[32];

			GetClassName (hWnd, szClassName,
				sizeof(szClassName)/sizeof(TCHAR));

			if (!_tcscmp (szClassName, TEXT("Dialog")) &&
				(RNAAPP_MAGIC_NUM == GetWindowLong (hWnd, DWL_USER))) {
				*((HWND *)lParam) = hWnd;
				return FALSE;
				}
			return TRUE;
		}

		And then performing the following command:
		
		EnumWindows(FindRNAAppWindow, (LPARAM)&hOldRNAWnd);

		You can determine the window handle of the currently running instance
		of RNAApp.exe (if any).