grafixgs.dsp

nucleus 文件系统,内核和彩色图形系统,在小系统上非常好用

# Begin Custom Build - .\Reg06.c
InputPath=".\Reg06.c"

".\O\Reg06.o" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
	START /w /m "$(MSDEVDIR)\Nucleus EDE\NUC_BLD.EXE"  "GrafixGS.ede" "GrafixGS - Win32 Release" $(InputPath)

# End Custom Build
# End Source File
# Begin Source File

SOURCE=".\Reg07.c"
# PROP Ignore_Default_Tool 1
# Begin Custom Build - .\Reg07.c
InputPath=".\Reg07.c"

".\O\Reg07.o" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
	START /w /m "$(MSDEVDIR)\Nucleus EDE\NUC_BLD.EXE"  "GrafixGS.ede" "GrafixGS - Win32 Release" $(InputPath)

# End Custom Build
# End Source File
# Begin Source File

SOURCE=".\Reg08.c"
# PROP Ignore_Default_Tool 1
# Begin Custom Build - .\Reg08.c
InputPath=".\Reg08.c"

".\O\Reg08.o" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
	START /w /m "$(MSDEVDIR)\Nucleus EDE\NUC_BLD.EXE"  "GrafixGS.ede" "GrafixGS - Win32 Release" $(InputPath)

# End Custom Build
# End Source File
# Begin Source File

SOURCE=".\Reg09.c"
# PROP Ignore_Default_Tool 1
# Begin Custom Build - .\Reg09.c
InputPath=".\Reg09.c"

".\O\Reg09.o" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
	START /w /m "$(MSDEVDIR)\Nucleus EDE\NUC_BLD.EXE"  "GrafixGS.ede" "GrafixGS - Win32 Release" $(InputPath)

# End Custom Build
# End Source File
# Begin Source File

SOURCE=".\Reg10.c"
# PROP Ignore_Default_Tool 1
# Begin Custom Build - .\Reg10.c
InputPath=".\Reg10.c"

".\O\Reg10.o" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
	START /w /m "$(MSDEVDIR)\Nucleus EDE\NUC_BLD.EXE"  "GrafixGS.ede" "GrafixGS - Win32 Release" $(InputPath)

# End Custom Build
# End Source File
# Begin Source File

SOURCE=".\Reg11.c"
# PROP Ignore_Default_Tool 1
# Begin Custom Build - .\Reg11.c
InputPath=".\Reg11.c"

".\O\Reg11.o" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
	START /w /m "$(MSDEVDIR)\Nucleus EDE\NUC_BLD.EXE"  "GrafixGS.ede" "GrafixGS - Win32 Release" $(InputPath)

# End Custom Build
# End Source File
# Begin Source File

SOURCE=".\Reg12.c"
# PROP Ignore_Default_Tool 1
# Begin Custom Build - .\Reg12.c
InputPath=".\Reg12.c"

".\O\Reg12.o" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
	START /w /m "$(MSDEVDIR)\Nucleus EDE\NUC_BLD.EXE"  "GrafixGS.ede" "GrafixGS - Win32 Release" $(InputPath)

# End Custom Build
# End Source File
# Begin Source File

SOURCE=".\Reg13.c"
# PROP Ignore_Default_Tool 1
# Begin Custom Build - .\Reg13.c
InputPath=".\Reg13.c"

".\O\Reg13.o" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
	START /w /m "$(MSDEVDIR)\Nucleus EDE\NUC_BLD.EXE"  "GrafixGS.ede" "GrafixGS - Win32 Release" $(InputPath)

# End Custom Build
# End Source File
# Begin Source File

SOURCE=".\Reg14.c"
# PROP Ignore_Default_Tool 1
# Begin Custom Build - .\Reg14.c
InputPath=".\Reg14.c"

".\O\Reg14.o" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
	START /w /m "$(MSDEVDIR)\Nucleus EDE\NUC_BLD.EXE"  "GrafixGS.ede" "GrafixGS - Win32 Release" $(InputPath)

# End Custom Build
# End Source File
# Begin Source File

SOURCE=".\Reg15.c"
# PROP Ignore_Default_Tool 1
# Begin Custom Build - .\Reg15.c
InputPath=".\Reg15.c"

".\O\Reg15.o" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
	START /w /m "$(MSDEVDIR)\Nucleus EDE\NUC_BLD.EXE"  "GrafixGS.ede" "GrafixGS - Win32 Release" $(InputPath)

# End Custom Build
# End Source File
# Begin Source File

SOURCE=".\Reg16.c"
# PROP Ignore_Default_Tool 1
# Begin Custom Build - .\Reg16.c
InputPath=".\Reg16.c"

".\O\Reg16.o" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
	START /w /m "$(MSDEVDIR)\Nucleus EDE\NUC_BLD.EXE"  "GrafixGS.ede" "GrafixGS - Win32 Release" $(InputPath)

# End Custom Build
# End Source File
# Begin Source File

SOURCE=".\Reg17.c"
# PROP Ignore_Default_Tool 1
# Begin Custom Build - .\Reg17.c
InputPath=".\Reg17.c"

".\O\Reg17.o" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
	START /w /m "$(MSDEVDIR)\Nucleus EDE\NUC_BLD.EXE"  "GrafixGS.ede" "GrafixGS - Win32 Release" $(InputPath)

# End Custom Build
# End Source File
# Begin Source File

SOURCE=".\Reg18.c"
# PROP Ignore_Default_Tool 1
# Begin Custom Build - .\Reg18.c
InputPath=".\Reg18.c"

".\O\Reg18.o" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
	START /w /m "$(MSDEVDIR)\Nucleus EDE\NUC_BLD.EXE"  "GrafixGS.ede" "GrafixGS - Win32 Release" $(InputPath)

# End Custom Build
# End Source File
# Begin Source File

SOURCE=".\Reg19.c"
# PROP Ignore_Default_Tool 1
# Begin Custom Build - .\Reg19.c
InputPath=".\Reg19.c"

".\O\Reg19.o" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
	START /w /m "$(MSDEVDIR)\Nucleus EDE\NUC_BLD.EXE"  "GrafixGS.ede" "GrafixGS - Win32 Release" $(InputPath)

# End Custom Build
# End Source File
# Begin Source File

SOURCE=".\Reg20.c"
# PROP Ignore_Default_Tool 1
# Begin Custom Build - .\Reg20.c
InputPath=".\Reg20.c"

".\O\Reg20.o" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
	START /w /m "$(MSDEVDIR)\Nucleus EDE\NUC_BLD.EXE"  "GrafixGS.ede" "GrafixGS - Win32 Release" $(InputPath)

# End Custom Build
# End Source File
# Begin Source File

SOURCE=".\Regclip.c"
# PROP Ignore_Default_Tool 1
# Begin Custom Build - .\Regclip.c
InputPath=".\Regclip.c"

".\O\Regclip.o" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
	START /w /m "$(MSDEVDIR)\Nucleus EDE\NUC_BLD.EXE"  "GrafixGS.ede" "GrafixGS - Win32 Release" $(InputPath)

# End Custom Build
# End Source File
# Begin Source File

SOURCE=".\Regclipv.c"
# PROP Ignore_Default_Tool 1
# Begin Custom Build - .\Regclipv.c
InputPath=".\Regclipv.c"

".\O\Regclipv.o" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
	START /w /m "$(MSDEVDIR)\Nucleus EDE\NUC_BLD.EXE"  "GrafixGS.ede" "GrafixGS - Win32 Release" $(InputPath)

# End Custom Build
# End Source File
# Begin Source File

SOURCE=".\Regclipv.h"
# PROP Exclude_From_Build 1
# PROP Ignore_Default_Tool 1
# End Source File
# Begin Source File

SOURCE=".\Seed1.c"
# PROP Ignore_Default_Tool 1
# Begin Custom Build - .\Seed1.c
InputPath=".\Seed1.c"

".\O\Seed1.o" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
	START /w /m "$(MSDEVDIR)\Nucleus EDE\NUC_BLD.EXE"  "GrafixGS.ede" "GrafixGS - Win32 Release" $(InputPath)

# End Custom Build
# End Source File
# Begin Source File

SOURCE=".\SETP0.c"
# PROP Ignore_Default_Tool 1
# Begin Custom Build - .\SETP0.c
InputPath=".\SETP0.c"

".\O\SETP0.o" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
	START /w /m "$(MSDEVDIR)\Nucleus EDE\NUC_BLD.EXE"  "GrafixGS.ede" "GrafixGS - Win32 Release" $(InputPath)

# End Custom Build
# End Source File
# Begin Source File

SOURCE=".\Str00.c"
# PROP Ignore_Default_Tool 1
# Begin Custom Build - .\Str00.c
InputPath=".\Str00.c"

".\O\Str00.o" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
	START /w /m "$(MSDEVDIR)\Nucleus EDE\NUC_BLD.EXE"  "GrafixGS.ede" "GrafixGS - Win32 Release" $(InputPath)

# End Custom Build
# End Source File
# Begin Source File

SOURCE=".\Str01.c"
# PROP Ignore_Default_Tool 1
# Begin Custom Build - .\Str01.c
InputPath=".\Str01.c"

".\O\Str01.o" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
	START /w /m "$(MSDEVDIR)\Nucleus EDE\NUC_BLD.EXE"  "GrafixGS.ede" "GrafixGS - Win32 Release" $(InputPath)

# End Custom Build
# End Source File
# Begin Source File

SOURCE=".\Str02.c"
# PROP Ignore_Default_Tool 1
# Begin Custom Build - .\Str02.c
InputPath=".\Str02.c"

".\O\Str02.o" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
	START /w /m "$(MSDEVDIR)\Nucleus EDE\NUC_BLD.EXE"  "GrafixGS.ede" "GrafixGS - Win32 Release" $(InputPath)

# End Custom Build
# End Source File
# Begin Source File

SOURCE=".\Str03.c"
# PROP Ignore_Default_Tool 1
# Begin Custom Build - .\Str03.c
InputPath=".\Str03.c"

".\O\Str03.o" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
	START /w /m "$(MSDEVDIR)\Nucleus EDE\NUC_BLD.EXE"  "GrafixGS.ede" "GrafixGS - Win32 Release" $(InputPath)

# End Custom Build
# End Source File
# Begin Source File

SOURCE=".\Str04.c"
# PROP Ignore_Default_Tool 1
# Begin Custom Build - .\Str04.c
InputPath=".\Str04.c"

".\O\Str04.o" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
	START /w /m "$(MSDEVDIR)\Nucleus EDE\NUC_BLD.EXE"  "GrafixGS.ede" "GrafixGS - Win32 Release" $(InputPath)

# End Custom Build
# End Source File
# Begin Source File

SOURCE=".\Str05.c"
# PROP Ignore_Default_Tool 1
# Begin Custom Build - .\Str05.c
InputPath=".\Str05.c"

".\O\Str05.o" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
	START /w /m "$(MSDEVDIR)\Nucleus EDE\NUC_BLD.EXE"  "GrafixGS.ede" "GrafixGS - Win32 Release" $(InputPath)

# End Custom Build
# End Source File
# Begin Source File

SOURCE=".\Str10.c"
# PROP Ignore_Default_Tool 1
# Begin Custom Build - .\Str10.c
InputPath=".\Str10.c"

".\O\Str10.o" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
	START /w /m "$(MSDEVDIR)\Nucleus EDE\NUC_BLD.EXE"  "GrafixGS.ede" "GrafixGS - Win32 Release" $(InputPath)

# End Custom Build
# End Source File
# Begin Source File

SOURCE=".\Str11.c"
# PROP Ignore_Default_Tool 1
# Begin Custom Build - .\Str11.c
InputPath=".\Str11.c"

".\O\Str11.o" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
	START /w /m "$(MSDEVDIR)\Nucleus EDE\NUC_BLD.EXE"  "GrafixGS.ede" "GrafixGS - Win32 Release" $(InputPath)

# End Custom Build
# End Source File
# Begin Source File

SOURCE=".\Str12.c"
# PROP Ignore_Default_Tool 1
# Begin Custom Build - .\Str12.c
InputPath=".\Str12.c"

".\O\Str12.o" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
	START /w /m "$(MSDEVDIR)\Nucleus EDE\NUC_BLD.EXE"  "GrafixGS.ede" "GrafixGS - Win32 Release" $(InputPath)

# End Custom Build
# End Source File
# Begin Source File

SOURCE=".\Str13.c"
# PROP Ignore_Default_Tool 1
# Begin Custom Build - .\Str13.c
InputPath=".\Str13.c"

".\O\Str13.o" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
	START /w /m "$(MSDEVDIR)\Nucleus EDE\NUC_BLD.EXE"  "GrafixGS.ede" "GrafixGS - Win32 Release" $(InputPath)

# End Custom Build
# End Source File
# Begin Source File

SOURCE=".\Str14.c"
# PROP Ignore_Default_Tool 1
# Begin Custom Build - .\Str14.c
InputPath=".\Str14.c"

".\O\Str14.o" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
	START /w /m "$(MSDEVDIR)\Nucleus EDE\NUC_BLD.EXE"  "GrafixGS.ede" "GrafixGS - Win32 Release" $(InputPath)

# End Custom Build
# End Source File
# Begin Source File

SOURCE=".\Str15.c"
# PROP Ignore_Default_Tool 1
# Begin Custom Build - .\Str15.c
InputPath=".\Str15.c"

".\O\Str15.o" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
	START /w /m "$(MSDEVDIR)\Nucleus EDE\NUC_BLD.EXE"  "GrafixGS.ede" "GrafixGS - Win32 Release" $(InputPath)

# End Custom Build
# End Source File
# Begin Source File

SOURCE=".\Str20.c"
# PROP Ignore_Default_Tool 1
# Begin Custom Build - .\Str20.c
InputPath=".\Str20.c"

".\O\Str20.o" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
	START /w /m "$(MSDEVDIR)\Nucleus EDE\NUC_BLD.EXE"  "GrafixGS.ede" "GrafixGS - Win32 Release" $(InputPath)

# End Custom Build
# End Source File
# Begin Source File

SOURCE=".\Str22.c"
# PROP Ignore_Default_Tool 1
# Begin Custom Build - .\Str22.c
InputPath=".\Str22.c"

".\O\Str22.o" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
	START /w /m "$(MSDEVDIR)\Nucleus EDE\NUC_BLD.EXE"  "GrafixGS.ede" "GrafixGS - Win32 Release" $(InputPath)

# End Custom Build
# End Source File
# Begin Source File

SOURCE=".\Strk0.c"
# PROP Ignore_Default_Tool 1
# Begin Custom Build - .\Strk0.c
InputPath=".\Strk0.c"

".\O\Strk0.o" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
	START /w /m "$(MSDEVDIR)\Nucleus EDE\NUC_BLD.EXE"  "GrafixGS.ede" "GrafixGS - Win32 Release" $(InputPath)

# End Custom Build
# End Source File
# Begin Source File

SOURCE=".\Strk1.c"
# PROP Ignore_Default_Tool 1
# Begin Custom Build - .\Strk1.c
InputPath=".\Strk1.c"

".\O\Strk1.o" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
	START /w /m "$(MSDEVDIR)\Nucleus EDE\NUC_BLD.EXE"  "GrafixGS.ede" "GrafixGS - Win32 Release" $(InputPath)

# End Custom Build
# End Source File
# Begin Source File

SOURCE=".\Strk2.c"
# PROP Ignore_Default_Tool 1
# Begin Custom Build - .\Strk2.c
InputPath=".\Strk2.c"

".\O\Strk2.o" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
	START /w /m "$(MSDEVDIR)\Nucleus EDE\NUC_BLD.EXE"  "GrafixGS.ede" "GrafixGS - Win32 Release" $(InputPath)

# End Custom Build
# End Source File
# Begin Source File

SOURCE=".\Strk3.c"
# PROP Ignore_Default_Tool 1
# Begin Custom Build - .\Strk3.c
InputPath=".\Strk3.c"

".\O\Strk3.o" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
	START /w /m "$(MSDEVDIR)\Nucleus EDE\NUC_BLD.EXE"  "GrafixGS.ede" "GrafixGS - Win32 Release" $(InputPath)

# End Custom Build
# End Source File
# Begin Source File

SOURCE=".\Strk4.c"
# PROP Ignore_Default_Tool 1
# Begin Custom Build - .\Strk4.c
InputPath=".\Strk4.c"

".\O\Strk4.o" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
	START /w /m "$(MSDEVDIR)\Nucleus EDE\NUC_BLD.EXE"  "GrafixGS.ede" "GrafixGS - Win32 Release" $(InputPath)

# End Custom Build
# End Source File
# Begin Source File

SOURCE=".\Strk5.c"
# PROP Ignore_Default_Tool 1
# Begin Custom Build - .\Strk5.c
InputPath=".\Strk5.c"

".\O\Strk5.o" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
	START /w /m "$(MSDEVDIR)\Nucleus EDE\NUC_BLD.EXE"  "GrafixGS.ede" "GrafixGS - Win32 Release" $(InputPath)

# End Custom Build
# End Source File
# Begin Source File

SOURCE=".\Strk6.c"
# PROP Igno