grafixgs.dsp

nucleus 文件系统,内核和彩色图形系统,在小系统上非常好用

# Begin Custom Build - .\Kvir9.c
InputPath=".\Kvir9.c"

".\O\Kvir9.o" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
	START /w /m "$(MSDEVDIR)\Nucleus EDE\NUC_BLD.EXE"  "GrafixGS.ede" "GrafixGS - Win32 Release" $(InputPath)

# End Custom Build
# End Source File
# Begin Source File

SOURCE=".\lcd_dvc.c"
# PROP Ignore_Default_Tool 1
# Begin Custom Build - .\lcd_dvc.c
InputPath=".\lcd_dvc.c"

".\O\lcd_dvc.o" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
	START /w /m "$(MSDEVDIR)\Nucleus EDE\NUC_BLD.EXE"  "GrafixGS.ede" "GrafixGS - Win32 Release" $(InputPath)

# End Custom Build
# End Source File
# Begin Source File

SOURCE=".\lcd_dvc.h"
# PROP Exclude_From_Build 1
# PROP Ignore_Default_Tool 1
# End Source File
# Begin Source File

SOURCE=".\Lin07.c"
# PROP Ignore_Default_Tool 1
# Begin Custom Build - .\Lin07.c
InputPath=".\Lin07.c"

".\O\Lin07.o" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
	START /w /m "$(MSDEVDIR)\Nucleus EDE\NUC_BLD.EXE"  "GrafixGS.ede" "GrafixGS - Win32 Release" $(InputPath)

# End Custom Build
# End Source File
# Begin Source File

SOURCE=".\Line0.c"
# PROP Ignore_Default_Tool 1
# Begin Custom Build - .\Line0.c
InputPath=".\Line0.c"

".\O\Line0.o" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
	START /w /m "$(MSDEVDIR)\Nucleus EDE\NUC_BLD.EXE"  "GrafixGS.ede" "GrafixGS - Win32 Release" $(InputPath)

# End Custom Build
# End Source File
# Begin Source File

SOURCE=".\Line1.c"
# PROP Ignore_Default_Tool 1
# Begin Custom Build - .\Line1.c
InputPath=".\Line1.c"

".\O\Line1.o" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
	START /w /m "$(MSDEVDIR)\Nucleus EDE\NUC_BLD.EXE"  "GrafixGS.ede" "GrafixGS - Win32 Release" $(InputPath)

# End Custom Build
# End Source File
# Begin Source File

SOURCE=".\Line2.c"
# PROP Ignore_Default_Tool 1
# Begin Custom Build - .\Line2.c
InputPath=".\Line2.c"

".\O\Line2.o" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
	START /w /m "$(MSDEVDIR)\Nucleus EDE\NUC_BLD.EXE"  "GrafixGS.ede" "GrafixGS - Win32 Release" $(InputPath)

# End Custom Build
# End Source File
# Begin Source File

SOURCE=".\Line8.c"
# PROP Ignore_Default_Tool 1
# Begin Custom Build - .\Line8.c
InputPath=".\Line8.c"

".\O\Line8.o" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
	START /w /m "$(MSDEVDIR)\Nucleus EDE\NUC_BLD.EXE"  "GrafixGS.ede" "GrafixGS - Win32 Release" $(InputPath)

# End Custom Build
# End Source File
# Begin Source File

SOURCE=".\Line9.c"
# PROP Ignore_Default_Tool 1
# Begin Custom Build - .\Line9.c
InputPath=".\Line9.c"

".\O\Line9.o" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
	START /w /m "$(MSDEVDIR)\Nucleus EDE\NUC_BLD.EXE"  "GrafixGS.ede" "GrafixGS - Win32 Release" $(InputPath)

# End Custom Build
# End Source File
# Begin Source File

SOURCE=".\Lineclip.c"
# PROP Ignore_Default_Tool 1
# Begin Custom Build - .\Lineclip.c
InputPath=".\Lineclip.c"

".\O\Lineclip.o" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
	START /w /m "$(MSDEVDIR)\Nucleus EDE\NUC_BLD.EXE"  "GrafixGS.ede" "GrafixGS - Win32 Release" $(InputPath)

# End Custom Build
# End Source File
# Begin Source File

SOURCE=".\Lines.h"
# PROP Exclude_From_Build 1
# PROP Ignore_Default_Tool 1
# End Source File
# Begin Source File

SOURCE=".\List0.c"
# PROP Ignore_Default_Tool 1
# Begin Custom Build - .\List0.c
InputPath=".\List0.c"

".\O\List0.o" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
	START /w /m "$(MSDEVDIR)\Nucleus EDE\NUC_BLD.EXE"  "GrafixGS.ede" "GrafixGS - Win32 Release" $(InputPath)

# End Custom Build
# End Source File
# Begin Source File

SOURCE=".\m124_img.c"
# PROP Ignore_Default_Tool 1
# Begin Custom Build - .\m124_img.c
InputPath=".\m124_img.c"

".\O\m124_img.o" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
	START /w /m "$(MSDEVDIR)\Nucleus EDE\NUC_BLD.EXE"  "GrafixGS.ede" "GrafixGS - Win32 Release" $(InputPath)

# End Custom Build
# End Source File
# Begin Source File

SOURCE=".\m1b_drv.c"
# PROP Ignore_Default_Tool 1
# Begin Custom Build - .\m1b_drv.c
InputPath=".\m1b_drv.c"

".\O\m1b_drv.o" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
	START /w /m "$(MSDEVDIR)\Nucleus EDE\NUC_BLD.EXE"  "GrafixGS.ede" "GrafixGS - Win32 Release" $(InputPath)

# End Custom Build
# End Source File
# Begin Source File

SOURCE=".\m1b_fil.c"
# PROP Ignore_Default_Tool 1
# Begin Custom Build - .\m1b_fil.c
InputPath=".\m1b_fil.c"

".\O\m1b_fil.o" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
	START /w /m "$(MSDEVDIR)\Nucleus EDE\NUC_BLD.EXE"  "GrafixGS.ede" "GrafixGS - Win32 Release" $(InputPath)

# End Custom Build
# End Source File
# Begin Source File

SOURCE=".\m1b_lin.c"
# PROP Ignore_Default_Tool 1
# Begin Custom Build - .\m1b_lin.c
InputPath=".\m1b_lin.c"

".\O\m1b_lin.o" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
	START /w /m "$(MSDEVDIR)\Nucleus EDE\NUC_BLD.EXE"  "GrafixGS.ede" "GrafixGS - Win32 Release" $(InputPath)

# End Custom Build
# End Source File
# Begin Source File

SOURCE=".\m2b4_drv.c"
# PROP Ignore_Default_Tool 1
# Begin Custom Build - .\m2b4_drv.c
InputPath=".\m2b4_drv.c"

".\O\m2b4_drv.o" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
	START /w /m "$(MSDEVDIR)\Nucleus EDE\NUC_BLD.EXE"  "GrafixGS.ede" "GrafixGS - Win32 Release" $(InputPath)

# End Custom Build
# End Source File
# Begin Source File

SOURCE=".\m2b4_fil.c"
# PROP Ignore_Default_Tool 1
# Begin Custom Build - .\m2b4_fil.c
InputPath=".\m2b4_fil.c"

".\O\m2b4_fil.o" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
	START /w /m "$(MSDEVDIR)\Nucleus EDE\NUC_BLD.EXE"  "GrafixGS.ede" "GrafixGS - Win32 Release" $(InputPath)

# End Custom Build
# End Source File
# Begin Source File

SOURCE=".\m2b4_lin.c"
# PROP Ignore_Default_Tool 1
# Begin Custom Build - .\m2b4_lin.c
InputPath=".\m2b4_lin.c"

".\O\m2b4_lin.o" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
	START /w /m "$(MSDEVDIR)\Nucleus EDE\NUC_BLD.EXE"  "GrafixGS.ede" "GrafixGS - Win32 Release" $(InputPath)

# End Custom Build
# End Source File
# Begin Source File

SOURCE=".\m8b_drv.c"
# PROP Ignore_Default_Tool 1
# Begin Custom Build - .\m8b_drv.c
InputPath=".\m8b_drv.c"

".\O\m8b_drv.o" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
	START /w /m "$(MSDEVDIR)\Nucleus EDE\NUC_BLD.EXE"  "GrafixGS.ede" "GrafixGS - Win32 Release" $(InputPath)

# End Custom Build
# End Source File
# Begin Source File

SOURCE=".\m8b_fil.c"
# PROP Ignore_Default_Tool 1
# Begin Custom Build - .\m8b_fil.c
InputPath=".\m8b_fil.c"

".\O\m8b_fil.o" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
	START /w /m "$(MSDEVDIR)\Nucleus EDE\NUC_BLD.EXE"  "GrafixGS.ede" "GrafixGS - Win32 Release" $(InputPath)

# End Custom Build
# End Source File
# Begin Source File

SOURCE=".\m8b_lin.c"
# PROP Ignore_Default_Tool 1
# Begin Custom Build - .\m8b_lin.c
InputPath=".\m8b_lin.c"

".\O\m8b_lin.o" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
	START /w /m "$(MSDEVDIR)\Nucleus EDE\NUC_BLD.EXE"  "GrafixGS.ede" "GrafixGS - Win32 Release" $(InputPath)

# End Custom Build
# End Source File
# Begin Source File

SOURCE=".\Markers.h"
# PROP Exclude_From_Build 1
# PROP Ignore_Default_Tool 1
# End Source File
# Begin Source File

SOURCE=".\Meta_wnd.h"
# PROP Exclude_From_Build 1
# PROP Ignore_Default_Tool 1
# End Source File
# Begin Source File

SOURCE=".\Metalibs.h"
# PROP Exclude_From_Build 1
# PROP Ignore_Default_Tool 1
# End Source File
# Begin Source File

SOURCE=".\Metaproc.h"
# PROP Exclude_From_Build 1
# PROP Ignore_Default_Tool 1
# End Source File
# Begin Source File

SOURCE=".\Metconst.h"
# PROP Exclude_From_Build 1
# PROP Ignore_Default_Tool 1
# End Source File
# Begin Source File

SOURCE=".\metfonts.h"
# PROP Exclude_From_Build 1
# PROP Ignore_Default_Tool 1
# End Source File
# Begin Source File

SOURCE=".\metlinks.h"
# PROP Exclude_From_Build 1
# PROP Ignore_Default_Tool 1
# End Source File
# Begin Source File

SOURCE=".\Metmacs.c"
# PROP Ignore_Default_Tool 1
# Begin Custom Build - .\Metmacs.c
InputPath=".\Metmacs.c"

".\O\Metmacs.o" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
	START /w /m "$(MSDEVDIR)\Nucleus EDE\NUC_BLD.EXE"  "GrafixGS.ede" "GrafixGS - Win32 Release" $(InputPath)

# End Custom Build
# End Source File
# Begin Source File

SOURCE=".\metmacs1.h"
# PROP Exclude_From_Build 1
# PROP Ignore_Default_Tool 1
# End Source File
# Begin Source File

SOURCE=".\metmacs2.h"
# PROP Exclude_From_Build 1
# PROP Ignore_Default_Tool 1
# End Source File
# Begin Source File

SOURCE=".\Metmacs3.h"
# PROP Exclude_From_Build 1
# PROP Ignore_Default_Tool 1
# End Source File
# Begin Source File

SOURCE=".\Metports.h"
# PROP Exclude_From_Build 1
# PROP Ignore_Default_Tool 1
# End Source File
# Begin Source File

SOURCE=".\Mous0.c"
# PROP Ignore_Default_Tool 1
# Begin Custom Build - .\Mous0.c
InputPath=".\Mous0.c"

".\O\Mous0.o" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
	START /w /m "$(MSDEVDIR)\Nucleus EDE\NUC_BLD.EXE"  "GrafixGS.ede" "GrafixGS - Win32 Release" $(InputPath)

# End Custom Build
# End Source File
# Begin Source File

SOURCE=".\Npen0.c"
# PROP Ignore_Default_Tool 1
# Begin Custom Build - .\Npen0.c
InputPath=".\Npen0.c"

".\O\Npen0.o" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
	START /w /m "$(MSDEVDIR)\Nucleus EDE\NUC_BLD.EXE"  "GrafixGS.ede" "GrafixGS - Win32 Release" $(InputPath)

# End Custom Build
# End Source File
# Begin Source File

SOURCE=".\Npen1.c"
# PROP Ignore_Default_Tool 1
# Begin Custom Build - .\Npen1.c
InputPath=".\Npen1.c"

".\O\Npen1.o" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
	START /w /m "$(MSDEVDIR)\Nucleus EDE\NUC_BLD.EXE"  "GrafixGS.ede" "GrafixGS - Win32 Release" $(InputPath)

# End Custom Build
# End Source File
# Begin Source File

SOURCE=".\Npen2.c"
# PROP Ignore_Default_Tool 1
# Begin Custom Build - .\Npen2.c
InputPath=".\Npen2.c"

".\O\Npen2.o" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
	START /w /m "$(MSDEVDIR)\Nucleus EDE\NUC_BLD.EXE"  "GrafixGS.ede" "GrafixGS - Win32 Release" $(InputPath)

# End Custom Build
# End Source File
# Begin Source File

SOURCE=".\Npen3.c"
# PROP Ignore_Default_Tool 1
# Begin Custom Build - .\Npen3.c
InputPath=".\Npen3.c"

".\O\Npen3.o" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
	START /w /m "$(MSDEVDIR)\Nucleus EDE\NUC_BLD.EXE"  "GrafixGS.ede" "GrafixGS - Win32 Release" $(InputPath)

# End Custom Build
# End Source File
# Begin Source File

SOURCE=".\Npen4.c"
# PROP Ignore_Default_Tool 1
# Begin Custom Build - .\Npen4.c
InputPath=".\Npen4.c"

".\O\Npen4.o" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
	START /w /m "$(MSDEVDIR)\Nucleus EDE\NUC_BLD.EXE"  "GrafixGS.ede" "GrafixGS - Win32 Release" $(InputPath)

# End Custom Build
# End Source File
# Begin Source File

SOURCE=".\Npen5.c"
# PROP Ignore_Default_Tool 1
# Begin Custom Build - .\Npen5.c
InputPath=".\Npen5.c"

".\O\Npen5.o" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
	START /w /m "$(MSDEVDIR)\Nucleus EDE\NUC_BLD.EXE"  "GrafixGS.ede" "GrafixGS - Win32 Release" $(InputPath)

# End Custom Build
# End Source File
# Begin Source File

SOURCE=".\Npen6.c"
# PROP Ignore_Default_Tool 1
# Begin Custom Build - .\Npen6.c
InputPath=".\Npen6.c"

".\O\Npen6.o" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
	START /w /m "$(MSDEVDIR)\Nucleus EDE\NUC_BLD.EXE"  "GrafixGS.ede" "GrafixGS - Win32 Release" $(InputPath)

# End Custom Build
# End Source File
# Begin Source File

SOURCE=".\Npen7.c"
# PROP Ignore_Default_Tool 1
# Begin Custom Build - .\Npen7.c
InputPath=".\Npen7.c"

".\O\Npen7.o" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
	START /w /m "$(MSDEVDIR)\Nucleus EDE\NUC_BLD.EXE"  "GrafixGS.ede" "GrafixGS - Win32 Release" $(InputPath)

# End Custom Build
# End Source File
# Begin Source File

SOURCE=".\Npen8.c"
# PROP Ignore_Default_Tool 1
# Begin Custom Build - .\Npen8.c
InputPath=".\Npen8.c"

".\O\Npen8.o" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
	START /w /m "$(MSDEVDIR)\Nucleus EDE\NUC_BLD.EXE"  "GrafixGS.ede" "GrafixGS - Win32 Release" $(InputPath)

# End Custom Build
# End Source File
# Begin Source File

SOURCE=".\Npen9.c"
# PROP Ignore_Default_Tool 1
# Begin Custom Build - .\Npen9.c
InputPath=".\Npen9.c"

".\O\Npen9.o" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
	START /w /m "$(MSDEVDIR)\Nucleus EDE\NUC_BLD.EXE"  "GrafixGS.ede" "GrafixGS - Win32 Release" $(InputPath)

# End Custom Build
# End Source File
# Begin Source File

SOURCE=".\Nu_math.c"
# PROP Ignore_Default_Tool 1
# Begin Custom Build - .\Nu_math.c
InputPath=".\Nu_math.c"

".\O\Nu_math.o" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
	START /w /m "$(MSDEVDIR)\Nucleus EDE\NUC_BLD.EXE"  "GrafixGS.ede" "GrafixGS - Win32 Release" $(InputPath)

# End Custom Build
# End Source File
# Begin Source File

SOURCE=".\Nu_math.h"
# PROP Exclude_From_Build 1
# PROP Ignore_Default_Tool 1
# End Source File
# Begin Source File