ups17b.asm

USB大全电子版全部资料3~包含源码、协议等

	call get_two_bytes
;put_Main_ConfigFrequency_String:
	mov   A, Asc_F		; Load ASCII 'F' into accumulator
	mov   [X + txBuf], A	;
	inc   [txBufPtr]		; Increment tx buffer pointer
	mov	X, [txBufPtr]	;
	mov   A, Asc_F		; Load ASCII 'F' into accumulator
	call get_two_bytes
;put_LowVoltageTransfer_String:
	mov   A, Asc_F		; Load ASCII 'F' into accumulator
	mov   [X + txBuf], A	;
	inc   [txBufPtr]		; Increment tx buffer pointer
	mov	X, [txBufPtr]	;
	mov   A, Asc_L		; Load ASCII 'L' into accumulator
	call get_two_bytes
;put_HighVoltageTransfer_String:
	mov   A, Asc_F		; Load ASCII 'F' into accumulator
	mov   [X + txBuf], A	;
	inc   [txBufPtr]		; Increment tx buffer pointer
	mov	X, [txBufPtr]	;
	mov   A, Asc_H		; Load ASCII 'H' into accumulator
	call get_two_bytes
	pop	X			;
	pop	A			;
	ret				;
;
;********************************************************************************
;		Report ID 2
;********************************************************************************
get_reportID2:
	push	A			;
	push	X			;
	mov A, 02h
	mov [send_ptr], A
	call initialize_req
;put_AC_ConfigVoltage_String:
	mov   A, Asc_F		; Load ASCII 'F' into accumulator
	mov   [X + txBuf], A	;
	inc   [txBufPtr]		; Increment tx buffer pointer
	mov	X, [txBufPtr]	;
	mov   A, Asc_O		; Load ASCII 'O' into accumulator
	call get_two_bytes
;put_AC_ConfigFrequency_String:
	mov   A, Asc_F		; Load ASCII 'F' into accumulator
	mov   [X + txBuf], A	;
	inc   [txBufPtr]		; Increment tx buffer pointer
	mov	X, [txBufPtr]	;
	mov   A, Asc_R		; Load ASCII 'R' into accumulator
	call get_two_bytes
;put_AC_ConfigApparentPower_String:
	mov   A, Asc_F		; Load ASCII 'F' into accumulator
	mov   [X + txBuf], A	;
	inc   [txBufPtr]		; Increment tx buffer pointer
	mov	X, [txBufPtr]	;
	mov   A, Asc_A		; Load ASCII 'A' into accumulator
	call get_two_bytes
;put_AC_ConfigActivePower_String:
	mov   A, Asc_F		; Load ASCII 'F' into accumulator
	mov   [X + txBuf], A	;
	inc   [txBufPtr]		; Increment tx buffer pointer
	mov	X, [txBufPtr]	;
	mov   A, Asc_P		; Load ASCII 'P' into accumulator
	call get_two_bytes
;put_AC_DelayBeforeStartup_String:
	mov   A, Asc_C		; Load ASCII 'C' into accumulator
	mov   [X + txBuf], A	;
	inc   [txBufPtr]		; Increment tx buffer pointer
	mov	X, [txBufPtr]	;
	mov   A, Asc_U		; Load ASCII 'U' into accumulator
	call get_three_bytes
;put_AC_DelayBeforeShutdown_String:
	mov   A, Asc_C		; Load ASCII 'C' into accumulator
	mov   [X + txBuf], A	;
	inc   [txBufPtr]		; Increment tx buffer pointer
	mov	X, [txBufPtr]	;
	mov   A, Asc_S		; Load ASCII 'S' into accumulator
	call get_three_bytes
;
	pop	X			;
	pop	A			;
	ret				;
;
;********************************************************************************
;		Report ID 3
;********************************************************************************
get_reportID3:
	push	A			;
	push	X			;
	mov A, 03h
	mov [send_ptr], A
	call initialize_req
;put_Battery_PresentStatus_String:
	mov   A, Asc_A		; Load ASCII 'A' into accumulator
	mov   [X + txBuf], A	;
	inc   [txBufPtr]		; Increment tx buffer pointer
	mov	X, [txBufPtr]	;
	mov   A, Asc_G		; Load ASCII 'G' into accumulator
	call end_req
; Check if an error has occured during communication with the UPS
	mov A, [rxFrameFlag]
	cmp A, 01h
	jz bad_value31
; NO error in the UPS communication
	call unsupported_check	; check if the request unsupported
;	mov A, [temp2]
	cmp A, 01h
	jz bad_value31
; Request is supported and no errors occured
; No change to BCD needed
	mov A, [rxBuf]
	and A, 0fh
	asr A				; bit 0 = used, bit1 = bad
	mov [data_send + 2], A
	jmp next31
bad_value31:
	; fill sent back byte with ffh
	mov A, 0ffh
	mov [data_send + 2], A
next31:
	call initialize_req
;put_Battery_Voltage_String:
	mov   A, Asc_B		; Load ASCII 'B' into accumulator
	mov   [X + txBuf], A	;
	inc   [txBufPtr]		; Increment tx buffer pointer
	mov	X, [txBufPtr]	;
	mov   A, Asc_V		; Load ASCII 'V' into accumulator
	call get_three_bytes
;put_Battery_Temperature_String:
	mov   A, Asc_B		; Load ASCII 'B' into accumulator
	mov   [X + txBuf], A	;
	inc   [txBufPtr]		; Increment tx buffer pointer
	mov	X, [txBufPtr]	;
	mov   A, Asc_T		; Load ASCII 'T' into accumulator
	call get_two_bytes
;get_Battery_TestResults_String:
	mov   A, Asc_T		; Load ASCII 'T' into accumulator
	mov   [X + txBuf], A	;
	inc   [txBufPtr]		; Increment tx buffer pointer
	mov	X, [txBufPtr]	;
	mov   A, Asc_R		; Load ASCII 'R' into accumulator
;	mov   A, Asc_D		; Load ASCII 'D' into accumulator
	call end_req
; Check if an error has occured during communication with the UPS
	mov A, [rxFrameFlag]
	cmp A, 01h
	jz bad_value34
; NO error in the UPS communication
	call unsupported_check	; check if the request unsupported
;	mov A, [temp2]
	cmp A, 01h
	jz bad_value34
; Request is supported and no errors occured
; No change to BCD needed
	mov A, [rxBuf]
	and A, 0fh	
	mov [data_send + 8], A
	jmp next34
bad_value34:
	; fill sent back byte with ffh
	mov A, 0ffh
	mov [data_send + 8], A
next34:

	pop	X			;
	pop	A			;
	ret				;
;
;***************************************************************************
set_reportID3:
put_Battery_TestStart_String:
	push	A			;
	push	X			;

	mov	A, 00h		;
	mov	[txBufPtr], A	;
	mov	X, [txBufPtr]	;
	mov   A, Asc_T		; Load ASCII 'T' into accumulator
	mov   [X + txBuf], A	;
	inc   [txBufPtr]		; Increment tx buffer pointer
	mov	X, [txBufPtr]	;
	mov   A, Asc_s		; Load ASCII 's' into accumulator
	mov   [X + txBuf], A	;
	inc   [txBufPtr]		; Increment tx buffer pointer
	mov	X, [txBufPtr]	;
	mov   A, Car_Ret		; Load carriage return into accumulator
	mov   [X + txBuf], A	;
	inc   [txBufPtr]		; Increment tx buffer pointer
	mov	X, [txBufPtr]	;
	mov   A, Ln_Fd		; Load line feed into accumulator
	mov   [X + txBuf], A	;
;
	call	putCommand		;
;
	call	delay;
;
	pop	X			;
	pop	A			;
	ret

;********************************************************************************
;		Report ID 4
;********************************************************************************
get_reportID4:
	push	A			;
	push	X			;
	mov A, 04h
	mov [send_ptr], A
	call initialize_req
;put_PowerConverter_PresentStatus_String:
	mov   A, Asc_A		; Load ASCII 'A' into accumulator
	mov   [X + txBuf], A	;
	inc   [txBufPtr]		; Increment tx buffer pointer
	mov	X, [txBufPtr]	;
	mov   A, Asc_G		; Load ASCII 'G' into accumulator
	call end_req
; Check if an error has occured during communication with the UPS
	mov A, [rxFrameFlag]
	cmp A, 01h
	jz bad_value41
; NO error in the UPS communication
	call unsupported_check	; check if the request unsupported
;	mov A, [temp2]
	cmp A, 01h
	jz bad_value41
; Request is supported and no errors occured
; No conversion needed
	mov A, [rxBuf]
	and A, 02h
	asr A
;	asr A
;	asr A
;	asr A
;	asr A
	mov [data_send + 3], A
	jmp next41
bad_value41:
	; fill sent back byte with ffh
	mov A, 0ffh
	mov [data_send + 3], A
next41:
	call initialize_req
;put_PowerConverter_In_Voltage_String:
	mov   A, Asc_N		; Load ASCII 'N' into accumulator
	mov   [X + txBuf], A	;
	inc   [txBufPtr]		; Increment tx buffer pointer
	mov	X, [txBufPtr]	;
	mov   A, Asc_V		; Load ASCII 'V' into accumulator
	call get_two_bytes
;put_PowerConverter_In_Frequency_String:
	mov   A, Asc_N		; Load ASCII 'N' into accumulator
	mov   [X + txBuf], A	;
	inc   [txBufPtr]		; Increment tx buffer pointer
	mov	X, [txBufPtr]	;
	mov   A, Asc_F		; Load ASCII 'F' into accumulator
	call get_two_bytes
;
	pop	X			;
	pop	A			;
	ret				;
;

;********************************************************************************
;		Report ID 5
;********************************************************************************
get_reportID5:
	push	A			;
	push	X			;
	mov A, 02h
	mov [send_ptr], A
	call initialize_req
;put_PowerConverter_Out_Voltage_String:
	mov   A, Asc_O		; Load ASCII 'O' into accumulator
	mov   [X + txBuf], A	;
	inc   [txBufPtr]		; Increment tx buffer pointer
	mov	X, [txBufPtr]	;
	mov   A, Asc_V		; Load ASCII 'V' into accumulator
	call get_two_bytes
;put_PowerConverter_Out_Frequency_String:
	mov   A, Asc_O		; Load ASCII 'O' into accumulator
	mov   [X + txBuf], A	;
	inc   [txBufPtr]		; Increment tx buffer pointer
	mov	X, [txBufPtr]	;
	mov   A, Asc_F		; Load ASCII 'F' into accumulator
	call get_two_bytes
;put_PowerConverter_Out_Load_String:
	mov   A, Asc_O		; Load ASCII 'O' into accumulator
	mov   [X + txBuf], A	;
	inc   [txBufPtr]		; Increment tx buffer pointer
	mov	X, [txBufPtr]	;
	mov   A, Asc_L		; Load ASCII 'L' into accumulator
	call get_two_bytes
;put_PowerConverter_Out_PresStat_String:
	mov   A, Asc_A		; Load ASCII 'A' into accumulator
	mov   [X + txBuf], A	;
	inc   [txBufPtr]		; Increment tx buffer pointer
	mov	X, [txBufPtr]	;
	mov   A, Asc_G		; Load ASCII 'G' into accumulator
	call end_req
; Check if an error has occured during communication with the UPS
	mov A, [rxFrameFlag]
	cmp A, 01h
	jz bad_value54
; NO error in the UPS communication
	call unsupported_check	; check if the request unsupported
;	mov A, [temp2]
	cmp A, 01h
	jz bad_value54
; Request is supported and no errors occured
; No conversion needed
	mov A, [rxBuf]
	and A, 08h
	cmp A, 08h
	jnz no_overload
	mov A, 01h
	jmp save_value
no_overload:
	mov A, 00h
save_value:
	mov [data_send + 8], A
; Get boost and buck
	call initialize_req
	mov   A, Asc_O		; Load ASCII 'O' into accumulator
	mov   [X + txBuf], A	;
	inc   [txBufPtr]		; Increment tx buffer pointer
	mov	X, [txBufPtr]	;
	mov   A, Asc_S		; Load ASCII 'S' into accumulator
	call end_req
; Check if an error has occured during communication with the UPS
	mov A, [rxFrameFlag]
	cmp A, 01h
	jz bad_value54
; NO error in the UPS communication
	call unsupported_check	; check if the request unsupported
;	mov A, [temp2]
	cmp A, 01h
	jz bad_value54
; Request is supported and no errors occured
; No conversion needed
	mov A, [rxBuf]
	and A, 0fh
	cmp A, 06h
	jz set_boost
	cmp A, 07h
	jz set_buck
	jmp next54
set_boost:
	mov A, [data_send + 8]
	or A, 02h
	mov [data_send + 8], A
	jmp next54
set_buck:
	mov A, [data_send + 8]
	or A, 04h
	mov [data_send + 8], A
	jmp next54		
bad_value54:
	; fill sent back byte with ffh
	mov A, 0ffh
	mov [data_send + 8], A
next54:

	pop	X			;
	pop	A			;
	ret				;

;************************************************************************
; This is the routine that is entered when a data item from the UPS is 
; requested and returns with the string resident in the receive buffer.
;************************************************************************
;
putCommand:
	mov	A, 00h		; Clear the accumulator.
	mov   [txBufPtr], A	; Reset tx buffer pointer.
	iowr	Watchdog		; Clear watchdog timer.