glmtrain.m

利用HMM的方法的三种语音识别算法

function [net, options] = glmtrain(net, options, x, t)
%GLMTRAIN Specialised training of generalized linear model
%
%	Description
%	NET = GLMTRAIN(NET, OPTIONS, X, T) uses the iterative reweighted
%	least squares (IRLS) algorithm to set the weights in the generalized
%	linear model structure NET.  This is a more efficient alternative to
%	using GLMERR and GLMGRAD and a non-linear optimisation routine
%	through NETOPT. Note that for linear outputs, a single pass through
%	the  algorithm is all that is required, since the error function is
%	quadratic in the weights.  The algorithm also handles scalar ALPHA
%	and BETA terms.  If you want to use more complicated priors, you
%	should use general-purpose non-linear optimisation algorithms.
%
%	For logistic and softmax outputs, general priors can be handled,
%	although this requires the pseudo-inverse of the Hessian, giving up
%	the better conditioning and some of the speed advantage of the normal
%	form equations.
%
%	The error function value at the final set of weights is returned in
%	OPTIONS(8). Each row of X corresponds to one input vector and each
%	row of T corresponds to one target vector.
%
%	The optional parameters have the following interpretations.
%
%	OPTIONS(1) is set to 1 to display error values during training. If
%	OPTIONS(1) is set to 0, then only warning messages are displayed.  If
%	OPTIONS(1) is -1, then nothing is displayed.
%
%	OPTIONS(2) is a measure of the precision required for the value of
%	the weights W at the solution.
%
%	OPTIONS(3) is a measure of the precision required of the objective
%	function at the solution.  Both this and the previous condition must
%	be satisfied for termination.
%
%	OPTIONS(5) is set to 1 if an approximation to the Hessian (which
%	assumes that all outputs are independent) is used for softmax
%	outputs. With the default value of 0 the exact Hessian (which is more
%	expensive to compute) is used.
%
%	OPTIONS(14) is the maximum number of iterations for the IRLS
%	algorithm;  default 100.
%
%	See also
%	GLM, GLMERR, GLMGRAD
%

%	Copyright (c) Ian T Nabney (1996-2001)

% Check arguments for consistency
errstring = consist(net, 'glm', x, t);
if ~errstring
  error(errstring);
end

if(~options(14))
  options(14) = 100;
end

display = options(1);
% Do we need to test for termination?
test = (options(2) | options(3));

ndata = size(x, 1);
% Add a column of ones for the bias 
inputs = [x ones(ndata, 1)];

% Linear outputs are a special case as they can be found in one step
if strcmp(net.outfn, 'linear')
  if ~isfield(net, 'alpha')
    % Solve for the weights and biases using left matrix divide
    temp = inputs\t;
  elseif size(net.alpha == [1 1])
    if isfield(net, 'beta')
      beta = net.beta;
    else
      beta = 1.0;
    end
    % Use normal form equation
    hessian = beta*(inputs'*inputs) + net.alpha*eye(net.nin+1);
    temp = pinv(hessian)*(beta*(inputs'*t));  
  else
    error('Only scalar alpha allowed');
  end
  net.w1 = temp(1:net.nin, :);
  net.b1 = temp(net.nin+1, :);
  % Store error value in options vector
  options(8) = glmerr(net, x, t);
  return;
end

% Otherwise need to use iterative reweighted least squares
e = ones(1, net.nin+1);
for n = 1:options(14)

  switch net.outfn
    case 'logistic'
      if n == 1
        % Initialise model
        p = (t+0.5)/2;
	act = log(p./(1-p));
        wold = glmpak(net);
      end
      link_deriv = p.*(1-p);
      weights = sqrt(link_deriv); % sqrt of weights
      if (min(min(weights)) < eps)
        warning('ill-conditioned weights in glmtrain')
        return
      end
      z = act + (t-p)./link_deriv;
      if ~isfield(net, 'alpha')
         % Treat each output independently with relevant set of weights
         for j = 1:net.nout
	    indep = inputs.*(weights(:,j)*e);
	    dep = z(:,j).*weights(:,j);
	    temp = indep\dep;
	    net.w1(:,j) = temp(1:net.nin);
	    net.b1(j) = temp(net.nin+1);
         end
      else
	 gradient = glmgrad(net, x, t);
         Hessian = glmhess(net, x, t);
         deltaw = -gradient*pinv(Hessian);
         w = wold + deltaw;
         net = glmunpak(net, w);
      end
      [err, edata, eprior, p, act] = glmerr(net, x, t);
      if n == 1
        errold = err;
        wold = netpak(net);
      else
        w = netpak(net);
      end
    case 'softmax'
      if n == 1
        % Initialise model: ensure that row sum of p is one no matter
	% how many classes there are
        p = (t + (1/size(t, 2)))/2;
	act = log(p./(1-p));
      end
      if options(5) == 1 | n == 1
        link_deriv = p.*(1-p);
        weights = sqrt(link_deriv); % sqrt of weights
        if (min(min(weights)) < eps)
          warning('ill-conditioned weights in glmtrain')
          return
        end
        z = act + (t-p)./link_deriv;
        % Treat each output independently with relevant set of weights
        for j = 1:net.nout
          indep = inputs.*(weights(:,j)*e);
	  dep = z(:,j).*weights(:,j);
	  temp = indep\dep;
	  net.w1(:,j) = temp(1:net.nin);
	  net.b1(j) = temp(net.nin+1);
        end
        [err, edata, eprior, p, act] = glmerr(net, x, t);
        if n == 1
          errold = err;
          wold = netpak(net);
        else
          w = netpak(net);
        end
      else
	% Exact method of calculation after w first initialised
	% Start by working out Hessian
	Hessian = glmhess(net, x, t);
	gradient = glmgrad(net, x, t);
	% Now compute modification to weights
	deltaw = -gradient*pinv(Hessian);
	w = wold + deltaw;
	net = glmunpak(net, w);
	[err, edata, eprior, p] = glmerr(net, x, t);
    end

    otherwise
      error(['Unknown activation function ', net.outfn]);
   end
   if options(1)
     fprintf(1, 'Cycle %4d Error %11.6f\n', n, err)
   end
   % Test for termination
   % Terminate if error increases
   if err >  errold
     errold = err;
     w = wold;
     options(8) = err;
     fprintf(1, 'Error has increased: terminating\n')
     return;
   end
   if test & n > 1
     if (max(abs(w - wold)) < options(2) & abs(err-errold) < options(3))
       options(8) = err;
       return;
     else
       errold = err;
       wold = w;
     end
   end
end

options(8) = err;
if (options(1) >= 0)
  disp(maxitmess);
end