lcdconf_s3c44b0x_c8_c320x240.h

用SDT开发的基于44B0板的PDA Demo程序. 这是北航出版的《嵌入式系统设计与开发例程详解-基于ARM的应用》附带光盘上的程序。

/*
*********************************************************************************************************
*                                                uC/GUI
*                        Universal graphic software for embedded applications
*
*                       (c) Copyright 2002, Micrium Inc., Weston, FL
*                       (c) Copyright 2002, SEGGER Microcontroller Systeme GmbH
*
*              礐/GUI is protected by international copyright laws. Knowledge of the
*              source code may not be used to write a similar product. This file may
*              only be used in accordance with a license and should not be redistributed
*              in any way. We appreciate your understanding and fairness.
*
----------------------------------------------------------------------
File        : LCDConf_S3C44B0X_C320x240.h
Purpose     : configuration file 
----------------------------------------------------------------------
*/

#ifndef LCDCONF_S3C44B0X_C8_C320X240_H
#define LCDCONF_S3C44B0X_C8_C320X240_H

/*********************************************************************
*
*                   General configuration of LCD
*
**********************************************************************
*/

#define LCD_XSIZE      (320)   /* X-resolution of LCD, Logical coor. */
#define LCD_YSIZE      (240)   /* Y-resolution of LCD, Logical coor. */

#define LCD_BITSPERPIXEL (8)

#define LCD_CONTROLLER    44
//-------------------------------//?
#define LCD_FIXEDPALETTE 332
#define LCD_SWAP_RB      1
//#undef LCD_PHYSCOLORS
#define LCD_NUM_DISPLAY 1
//-------------------------------//?

/*********************************************************************
*
*                   Full bus configuration
*
**********************************************************************
*/

#define LCD_READ_MEM(base,Off)            *((U8*)         (base+((U32)(Off))))
#define LCD_WRITE_MEM(base,Off,data)      *((U8*)         (base+((U32)(Off))))=data//used for pixel option
#define LCD_READ_REG(Off)               //*((volatile U16*)(0xc1ffe0+(((U16)(Off))<<1)))
#define LCD_WRITE_REG(Off,data)         //*((volatile U16*)(0xc1ffe0+(((U16)(Off))<<1)))=data
#define LCD_ON()
#define LCD_OFF()

#endif /* LCDCONF_S3C44B0X_C8_C320X240_H */