auto.fit

此为用VHDL编写的可实现动感图像的点阵

-- MAX+plus II Compiler Fit File      
-- Version 10.0 9/14/2000             
-- Compiled: 09/22/2004 17:39:25      

-- Copyright (C) 1988-2000 Altera Corporation
-- Any megafunction design, and related net list (encrypted or decrypted),
-- support information, device programming or simulation file, and any other
-- associated documentation or information provided by Altera or a partner
-- under Altera's Megafunction Partnership Program may be used only to
-- program PLD devices (but not masked PLD devices) from Altera.  Any other
-- use of such megafunction design, net list, support information, device
-- programming or simulation file, or any other related documentation or
-- information is prohibited for any other purpose, including, but not
-- limited to modification, reverse engineering, de-compiling, or use with
-- any other silicon devices, unless such use is explicitly licensed under
-- a separate agreement with Altera or a megafunction partner.  Title to
-- the intellectual property, including patents, copyrights, trademarks,
-- trade secrets, or maskworks, embodied in any such megafunction design,
-- net list, support information, device programming or simulation file, or
-- any other related documentation or information provided by Altera or a
-- megafunction partner, remains with Altera, the megafunction partner, or
-- their respective licensors.  No other licenses, including any licenses
-- needed under any third party's intellectual property, are provided herein.

CHIP "auto"
BEGIN

    DEVICE = "EPM7064SLC44-5";

    "clk"                          : INPUT_PIN  = 43     ;
    "cp"                           : INPUT_PIN  = 12     ; -- LC1
    "t0"                           : OUTPUT_PIN = 14     ; -- LC30
    "t1"                           : OUTPUT_PIN = 28     ; -- LC40
    "t2"                           : OUTPUT_PIN = 24     ; -- LC33
    "t3"                           : OUTPUT_PIN = 31     ; -- LC46
    "t4"                           : OUTPUT_PIN = 29     ; -- LC41
    "t5"                           : OUTPUT_PIN = 27     ; -- LC37
    "t6"                           : OUTPUT_PIN = 9      ; -- LC4
    "t7"                           : OUTPUT_PIN = 11     ; -- LC3
    "y0"                           : OUTPUT_PIN = 25     ; -- LC35
    "y1"                           : OUTPUT_PIN = 26     ; -- LC36
    "y2"                           : OUTPUT_PIN = 21     ; -- LC17
    "y3"                           : OUTPUT_PIN = 20     ; -- LC19
    "y4"                           : OUTPUT_PIN = 19     ; -- LC20
    "y5"                           : OUTPUT_PIN = 16     ; -- LC25
    "y6"                           : OUTPUT_PIN = 17     ; -- LC24
    "y7"                           : OUTPUT_PIN = 18     ; -- LC21
    ":24"                          : LOCATION   = LC52   ; -- PIN 36  -- b16
    ":25"                          : LOCATION   = LC53   ; -- PIN 37  -- b15
    ":26"                          : LOCATION   = LC55   ;  -- b14
    ":27"                          : LOCATION   = LC51   ; -- PIN 34  -- b13
    ":28"                          : LOCATION   = LC50   ;  -- b12
    ":29"                          : LOCATION   = LC49   ; -- PIN 33  -- b11
    ":30"                          : LOCATION   = LC54   ;  -- b10
    ":31"                          : LOCATION   = LC56   ; -- PIN 38  -- b9
    ":32"                          : LOCATION   = LC57   ; -- PIN 39  -- b8
    ":33"                          : LOCATION   = LC58   ;  -- b7
    ":34"                          : LOCATION   = LC59   ;  -- b6
    ":35"                          : LOCATION   = LC64   ; -- PIN 41  -- b5
    ":36"                          : LOCATION   = LC63   ;  -- b4
    ":37"                          : LOCATION   = LC62   ; -- PIN 40  -- b3
    ":38"                          : LOCATION   = LC61   ;  -- b2
    ":39"                          : LOCATION   = LC60   ;  -- b1
    ":40"                          : LOCATION   = LC34   ;  -- b0

END;

INTERNAL_INFO "auto"
BEGIN
	DEVICE = EPM7064SLC44-5;
	LC21    : LORAX = "G21R0";
	LC24    : LORAX = "G24R0";
	LC25    : LORAX = "G103R0";
	LC20    : LORAX = "G57R0";
	LC19    : LORAX = "G56R0";
	LC17    : LORAX = "G54R0";
	LC36    : LORAX = "G61R0";
	LC35    : LORAX = "G60R0";
	LC3     : LORAX = "G19R0";
	LC4     : LORAX = "G20R0";
	LC37    : LORAX = "G25R0";
	LC41    : LORAX = "G107R0";
	LC46    : LORAX = "G75R0";
	LC33    : LORAX = "G58R0";
	LC40    : LORAX = "G28R0";
	LC30    : LORAX = "G71R0";
	LC55    : LORAX = "G64R0,PA12R0C3";
	LC54    : LORAX = "G63R0,PA15R0C3";
	LC56    : LORAX = "G65R0,PA11R0C3";
	LC57    : LORAX = "G78R0,PA20R0C3";
	LC58    : LORAX = "G79R0,PA21R0C3";
	LC59    : LORAX = "G80R0,PA25R0C3";
	LC64    : LORAX = "G114R0,PA31R0C3";
	LC63    : LORAX = "G113R0,PA34R0C3";
	LC62    : LORAX = "G112R0,PA30R0C3";
	LC61    : LORAX = "G111R0,PA29R0C3";
	LC60    : LORAX = "G81R0,PA22R0C3";
	LC34    : LORAX = "G59R0,PA10R0C2,PA10R0C3";
	OH0R0P12 : LORAX = "G83R0,PA18R0C2,PA18R0C3";
	LC49    : LORAX = "G29R0,PA7R0C1,PA7R0C2,PA7R0C3";
	LC51    : LORAX = "G31R0,PA3R0C1,PA3R0C3,PA3R0C2";
	LC53    : LORAX = "G62R0,PA16R0C2,PA16R0C3";
	LC52    : LORAX = "G32R0,PA1R0C3,PA1R0C2";
	LC50    : LORAX = "G30R0,PA5R0C1,PA5R0C2,PA5R0C3";
END;