menu.h

该程序是基于PC104的工控板的多参数监护仪的源程序.监护内容包含:心电血氧呼吸无创血压等等.

#ifndef __MENU_H
#define __MENU_H
#ifndef __STDIO_H
#include <stdio.h>
#endif
#ifndef __TIME_H
#include <time.h>
#endif
#ifndef __DOS_H
#include <dos.h>
#endif
#ifndef __FCNTL_H
#include <fcntl.h>
#endif
#ifndef __VIDEO_H
#include "video.h"
#endif

#define NO_DATA		0


#define PRTWAV_COUNTER	16
#define PRTLST_COUNTER	23


//#define D_DEBUG		1
#define MENU_COLOR	WHITE		//菜单字体颜色
#define MENU_BCOLOR	BLACK		//菜单背景色
#define MENU_CCOLOR	LIGHTBLUE	//选中菜单字体颜色
#define MENU_CBCOLOR	WHITE		//选中菜单背景色

#define VM_COLOR	LIGHTRED	//值菜单中值的颜色
#define VM_BCOLOR	BLACK		//值菜单中值的背景色
#define VM_CCOLOR	YELLOW		//选种值菜单中值的颜色
#define VM_CBCOLOR	BLACK		//选中值菜单中值的背景色

#define SYST_COLOR	LIGHTMAGENTA
#define MEAN_COLOR	LIGHTGREEN
#define DIAS_COLOR	LIGHTBLUE

#define ECG_COLOR	LIGHTGREEN
#define ST_COLOR	WHITE
#define SPO2_COLOR	LIGHTMAGENTA
#define NIBP_COLOR	LIGHTCYAN
#define RESP_COLOR	YELLOW
#define TEMP_COLOR	LIGHTBLUE

#define RESPWAV_COLOR	YELLOW
#define PLETHWAV_COLOR	LIGHTRED

#define L_I_COLOR	LIGHTRED
#define L_II_COLOR	LIGHTGREEN
#define L_III_COLOR	LIGHTCYAN
#define L_aVR_COLOR 	LIGHTMAGENTA
#define L_aVL_COLOR	LIGHTBLUE
#define L_aVF_COLOR	YELLOW
#define L_V_COLOR	WHITE

#define REALTIMELEN  86400L	//24(hour)*60(min)*60(sec)
#define REALDATALEN  1440	//实时数据的长度
#define MONDATAL  1440		//24(hour)*60(min)
#define GRPPAGE_LEN  120	//趋势图形的页长120点
#define GRPPAGE_HIGH 160	//趋势图的高
#define GRPPAGE_ENDY  475	//趋势图底线
#define GRPPAGE_ENDX  416	//趋势图右边界
#define GRPPAGE_WIDTH 360	//趋势图的宽
#define PRTLSTLEN  12		//趋势列表每页的数据


#define FRZWAVELEN  560


#define EcacheL	4480L	//FRZWAVELEN*8
#define PcacheL	4480L	//FRZWAVELEN*8

#define WAVXSTART	16
#define XSTART		8
#define YSTART		6
#define ECG_HIGH	128
#define ECG_ENDY	162	//30+132=162
#define ECG_IENDY	310	//162+16+132=310
#define PLETH_HIGH	99
#define PLETH_ENDY	460
#define PLETH_SMALL_ENDY 529

#define RESP_HIGH	96
#define RESP_ENDY	588	//
#define WAVE_STARTY	30
#define WAVE_ENDY	598

#define RESP_SMALL_HIGH	64
#define RESP_SMALL_ENDY	596

#define TREDNGRP_ENDY	518
#define TRENDLST_ENDY	540

//波形开始在WAVE_STARTY=30
#define I_ENDY		116	//old	96
#define II_ENDY		173	//old	160
#define III_ENDY	230	//old	224
#define aVR_ENDY	287	//old	288
#define aVL_ENDY	344	//old	352
#define aVF_ENDY	401	//old	416
#define V_ENDY		458	//old	480
#define LEFTMAXX	560

#define SEVENLEAD_HIGH	86	//7导联时最大波形[old 64]

#define ECGW_RATE_BASE	3	//同步时的ECG压缩比
#define ECGW_SYNC_RATE	2


#define HRPRUP_DEF_VAL	160
#define HRPRLOW_DEF_VAL	50
#define STUP_DEF_VAL	20
#define STLOW_DEF_VAL	-20
#define SPO2UP_DEF_VAL	99
#define SPO2LOW_DEF_VAL	90
#define SYSTUP_DEF_VAL	160
#define SYSTLOW_DEF_VAL	90
#define DIASUP_DEF_VAL	120
#define DIASLOW_DEF_VAL	50
#define MEANUP_DEF_VAL	140
#define MEANLOW_DEF_VAL	70
#define RESPUP_DEF_VAL	60
#define RESPLOW_DEF_VAL	10


#define TP_CHARE  0  //字符类型,无中英文切换
#define TP_CHAREC 1  //字符类型,有中英文切换
#define TP_INT2  2  //数值为2位的整形类型
#define TP_INT3  3  //数值为3位的整形类型
#define TP_FLT4  4  //数值为4.1型的浮点数
#define TP_FLT5  5  //数值为5.2型的浮点数
#define TP_KPA	 6  //压力千帕
#define TP__F	 7  //温度`F
#define TP_COLOR 8  //颜色显示类型
#define TP_MOVCUS 9
//#define TP_BKCOLOR 10

#define TEMP_UPLIMIT	250

#define V_HEARTBIG	0
#define V_HEARTSMALL	1
#define V_RESPBIG	2
#define V_RESPSMALL	3

#define V_AUTO	 1
#define V_MANUAL 0
#define V_MONITOR 0
#define V_DEMO	 1
#define V_OFF	 1
#define V_ON	 0
#define V_CHINESE  1
#define V_ENGLISH  0
#define V_HR	0
#define V_PR	1
#define V_MMHG	0
#define V_KPA	1
#define V_C_	0
#define V_F_	1
#define V_I	0
#define V_II	1
#define V_III	2
#define V_aVR	3
#define V_aVL	4
#define V_aVF	5
#define V_V	6
#define V_X0_5	0
#define V_X1	1
#define V_X2	2
#define V_X4	3
#define V_DIA	0
#define V_MON	1
#define V_OPE	2
#define V_25MM	1
#define V_ADULT_HIGH 0
#define V_ADULT_MID  1
//正向测量
#define V_DIRECT 0
#define V_SINGLE 0
#define V_SEVEN	 1


#define ID_NOCMD	0x00
#define ID_INTOFILE	0xf3
#define ID_INTOTNDGRP	0xf4
#define ID_INTOTNDLST	0xf5
#define ID_INTONIBPLST  0xf6
//#define

#define VID_NOCMD  	0x00
#define VID_NIBPUNIT	0x01
#define VID_AUTOTIME	0x02
#define VID_AUTOMANUAL	0x03
#define VID_TEMP1UNIT	0x04
#define VID_SYSDEF	0x05
#define VID_MONDEMO	0x06
#define VID_MODDATE	0x07
#define VID_MODTIME	0x08
#define VID_LANGUAGE	0x09
#define VID_PRTTIME	0x0a
#define VID_ARMTIME	0x0b
#define VID_GAPTIME	0x0c
#define VID_ARMDEF	0x0d
#define VID_TURNPAGE	0x0e
#define VID_PRTPAGE	0x0f
#define VID_SAVEWAV	0x10
#define VID_MENUEXIT	0x11
#define VID_SLTFILE	0x12
#define VID_SLTPAGE	0x13
#define VID_PRTFILE	0x14

#define VID_PARAMETER	0x16
#define VID_GTIMESTEP	0x17
#define VID_GTNDPAGE	0x18
#define VID_MOVECUS	0x19
#define VID_LTNDPAGE	0x1a
#define VID_LTIMESTEP	0x1b
#define VID_PRINTLST	0x1c
#define VID_HRPR_UP	0x1d
#define VID_HRPR_LOW	0x1e
#define VID_ST_UP	0x1f
#define VID_ST_LOW	0x20
#define VID_SPO2_UP	0x21
#define VID_SPO2_LOW	0x22
#define VID_SYST_UP	0x23
#define VID_SYST_LOW	0x24
#define VID_MEAN_UP	0x25
#define VID_MEAN_LOW	0x26
#define VID_DIAS_UP	0x27
#define VID_DIAS_LOW	0x28
#define VID_RESP_UP	0x29
#define VID_RESP_LOW	0x2a
#define VID_TEMP1_UP	0x2b
#define VID_TEMP1_LOW	0x2c
#define VID_TEMP2_UP	0x2d
#define VID_TEMP2_LOW	0x2e
#define VID_LEADDIS	0x2f
#define VID_BPDOMAIN	0x30
#define VID_TEMP2UNIT	0x31
#define VID_CLEARTIME	0x32
#define VID_SECLEAD	0x33
#define VID_FRZLEADSLT	0x34
#define VID_FILLEADSLT	0x35
#define VID_EXITFILE	0x36
#define VID_EXITGRP	0x37
#define VID_EXITLIST	0x38
#define VID_SLTLEADCLR	0x39
#define VID_LEADCOLOR	0x3a
#define VID_BKCOLOR	0x3b
#define VID_ARM_ALLOW	0x3c
#define VID_NIBPPAGE	0x3d
#define VID_PRTNIPLST	0x3e
#define VID_CLEARDATA   0x3f
#define VID_EXITNIBPLS	0x40
#define VID_NIBPREV	0x41
#define VID_INTENSITY 0x42
#define VID_LEACHWAVE	0x43

typedef union keycode
{
   int w;
   char b;
}Keycode;


typedef struct monda{//趋势取样结点结构
   unsigned int HR;
   unsigned int PR;
	    char ST;
   unsigned char SPO2;
   unsigned int  TEMP1;
   unsigned int  TEMP2;
   unsigned char RESP;
   unsigned int SYST;
   unsigned int MEAN;
   unsigned int DIAS;
}  MonData;

typedef struct rtd{//实时记录血压数据
   unsigned long TIME;
   MonData  DATA;
}  REALTIMEDATA;

typedef struct vm{
   int  ix, iy;//标题坐标
   int  vx, vy;//值显示坐标
   int  low,up;//上下限
   int  value;//值
   char **content;//内容
   char **item;
   unsigned char VID;//命令ID
   char type;//字符?数字?中英文?颜色...
   char cycle;//是否循环记数 [0不循环/1循环]
}  VMENU;

typedef struct it{
   int  g_x;//图形标志的X坐标位置
   int  t_x; int  t_y;//图形说明的开始位置
   char subnum;//子菜单数
   char num;//本级菜单数
   char grpnum;//图形索引号
   char **item;//图形说明
   VMENU *vmenu;//值菜单指针
   char autoexit;//自动显示,退出
   unsigned char ID;
}ITEM;

char GRP_ARMRIGN[]={0xff, 0xff, 0x00};
char *ITEM_ECG[]={"ＥＣＧ","心 电 "}; //FONT16 (48*16)
char *ITEM_PLETH[]={"ＰＬＥＴＨ","脉搏氧波形"};//FONT16 (80*16)
char *ITEM_SPO2[]={"ＳＰＯ２","脉 搏 氧"};//FONT16  (64*16)"血氧饱和度"
char *ITEM_RESP[]={"ＲＥＳＰ","呼  吸  "};//FONT16  (64*16)
char *ITEM_TEMP1[]={"ＴＥＭＰ1","体 温 １ "};//FONT16  (80*16)
char *ITEM_TEMP2[]={"ＴＥＭＰ2","体 温 ２ "};//FONT16  (80*16)
char *ITEM_HR[]={"ＨＲ","心率"};//FONT16  (32*16)
char *ITEM_PR[]={"ＰＲ","脉率"};//FONT16  (32*16)
char *ITEM_ST[]={"ＳＴ","ST段"};//FONT16  (32*16)
char *ITEM_NIBP[]={"ＮＩＢＰ","无创血压"};//FONT16  (64*16)


char *ITEM_STEP[]={"STEP:","标尺:"};//ASCII FONT12  (40*12)
char *ITEM_PAGE[]={"PAGE:","页码:"};//ASCII FONT12  (40*12)
char *ITEM_CRITERION[]={"CRITERION","    标 准 "};//ASCII FONT12  (72*12)
char *ITEM_CYCLE[]={"cyl","循环"};//ASCII FONT12    (24*12)
char *ITEM_CLEAR[]={"clr","清除"};//ASCII FONT12    (24*12)
//char *ITEM_ALARM[]={"ALARM","报警"};//ASCII FONT12  (40*12)
//char *ITEM_PULSE[]={"PULSE","脉搏"};//ASCII FONT12  (40*12)

char *ITEM_SYST[]={"SYST ","收缩压"};//ASCII FONT12   (36*12)
char *ITEM_DIAS[]={"DIAS ","舒张压"};//ASCII FONT12   (36*12)
char *ITEM_MEAN[]={"MEAN ","平均压"};//ASCII FONT12   (36*12)
char *ITEM_NIBPCHK[]={"CHK","测量"};//ASCII FONT12  (40*12)
//char *ITEM_NIBPUNIT[]={"BP UNIT","血压单位:"};//ASCII FONT12 (56*12)
char *ITEM_LEADSTAS[]={"ON ","连接","OFF","脱落"};//ASCII FONT12(24*12)
char *VER_STR[]={"Ver","版本"};//ASCII FONT12(24*12)


char *ITEM_EXITMENU[]= {"[ EXIT MENU ]","退 出 菜 单"};

char *ITEM_ECGSET[]=   {"[ ECG SET ]","心 电 设 置"};
char *ITEM_NIBPSET[]=  {"[ NIBP SET ]","血 压 设 置"};
char *ITEM_RESPTEMP[]= {"[ RESP TEMP ]","呼 吸 体 温"};
char *ITEM_DATETIME[]= {"[ DATE TIME ]","时 间 日 期"};
char *ITEM_SYSSET[]=   {"[ SYSTEM SET ]","系 统 设 置"};
char *ITEM_PRTSET[]=   {"[ PRINT SET ]","打 印 设 置"};
char *ITEM_WAVCOLOR[]= {"[ WAVE COLOR ]","波 形 颜 色"};
char *ITEM_NUMCOLOR[]= {"[ NUM COLOR ]","数 值 颜 色"};

char *ITEM_ALARMSET[]= {"[ ALARM SET ]","报 警 设 置"};
char *ITEM_ECGALARM[]= {"[ ECG ALARM ]","心 电 报 警"};