bank_ex.opt

RTX51 example use. Inside are example on how to use RTX51 RTOS. it uses memory pool, messages, RTXba

### uVision2 Project, (C) Keil Software
### Do not modify !

 cExt (*.c)
 aExt (*.a*; *.src)
 oExt (*.obj)
 lExt (*.lib)
 tExt (*.txt)
 pExt (*.plm)
 DaveTm { 0,0,0,0,0,0,0,0 }

Target (Infineon C517A), 0x0000 // Tools: 'MCS-51'
GRPOPT 1,(Application),1,0,0
GRPOPT 2,(RTX Configuration),1,0,0
GRPOPT 3,(System Configuration),1,0,0

OPTFFF 1,1,1,0,0,0,0,0,<.\Rtx_root.c><Rtx_root.c> 
OPTFFF 1,2,1,0,0,0,0,0,<.\Rtx_b1.c><Rtx_b1.c> 
OPTFFF 1,3,1,0,0,0,0,0,<.\Rtx_b0.c><Rtx_b0.c> 
OPTFFF 2,4,2,301989888,0,0,0,0,<.\Rtxconf.a51><Rtxconf.a51> 
OPTFFF 3,5,2,369098752,0,0,0,0,<.\L51_bank.a51><L51_bank.a51> 


TARGOPT 1, (Infineon C517A)
 CLK51=24000000
  OPTTT 1,1,1,0
  OPTHX 0,65535,0,0,0
  OPTLX 120,65,8,<.\Listings\>
  OPTOX 16
  OPTLT 1,1,1,0,1,1,0,1,0,0,0
  OPTXL 1,1,1,1,1,1,1,0,0
  OPTFL 1,0,1
  OPTBL 0,(User's Manual)<DATASHTS\INFINEON\M517A.PDF>
  OPTBL 1,(Add on databooks)<DATASHTS\ADDBOOKS.PDF>
  OPTBL 2,(C500 Instruction Set Manual)<DATASHTS\INFINEON\M500.PDF>
  OPTDL (S8051.DLL)()(D500.DLL)(-p517A)(S8051.DLL)()(T500.DLL)(-p517A)
  OPTDBG 501,0,()()()()(.\Simulator.ini)()()()()() ()()()()
  OPTKEY 0,(DLGD500)((5048=-1,-1,-1,-1,0)(98=-1,-1,-1,-1,0)(82=-1,-1,-1,-1,0)(83=-1,-1,-1,-1,0)(84=-1,-1,-1,-1,0)(85=-1,-1,-1,-1,0)(86=-1,-1,-1,-1,0)(87=-1,-1,-1,-1,0)(88=-1,-1,-1,-1,0)(89=-1,-1,-1,-1,0)(90=-1,-1,-1,-1,0)(102=-1,-1,-1,-1,0)(80=-1,-1,-1,-1,0)(81=-1,-1,-1,-1,0)(91=-1,-1,-1,-1,0)(92=-1,-1,-1,-1,0)(93=-1,-1,-1,-1,0)(94=-1,-1,-1,-1,0)(100=-1,-1,-1,-1,0)(101=-1,-1,-1,-1,0)(5031=240,198,443,347,0)(104=-1,-1,-1,-1,0))
  OPTBB 0,0,12,1,-8290290,0,0,0,0,1,<RTX_B1.C>()(\RTX_B1\12)
  OPTBB 1,0,12,1,-8355826,0,0,0,0,1,<RTX_B0.C>()(\RTX_B0\12)
  OPTWA 0,1,(count0)
  OPTWA 1,1,(count1)
  OPTBT 0,(Task State)(tasks ())
  OPTBT 1,(Mailboxes)(mailboxes ())
  OPTBT 2,(Semaphores)(semaphores ())
  OPTBT 3,(Mem.Pools)(mempools ())
  OPTSY 0,0,(*)
  OPTDF 0x8080
  OPTLE <>
  OPTLC <>
EndOpt