hw_silitek.c

很少见的linux下的红外口的工具

/****************************************************************************
 ** hw_silitek.c ***********************************************************
 ****************************************************************************
 *
 * routines for Silitek receiver
 *
 * Copyright (C) 1999 Christoph Bartelmus <[e-mail]>
 * 	modified for logitech receiver by Isaac Lauer <[e-mail]>
 *	        modified for silitek receiver by Krister Wicksell
 *	        <[e-mail]>
 * */

#ifdef HAVE_CONFIG_H
# include <config.h>
#endif

#include <stdio.h>
#include <stdlib.h>
#include <fcntl.h>
#include <unistd.h>
#include <limits.h>
#include <signal.h>
#include <termios.h>
#include <sys/stat.h>
#include <sys/types.h>
#include <sys/ioctl.h>

#include "hardware.h"
#include "serial.h"
#include "ir_remote.h"
#include "lircd.h"
#include "hw_silitek.h"

#define NUMBYTES 3
#define TIMEOUT 20000

extern struct ir_remote *repeat_remote, *last_remote;

unsigned char b[NUMBYTES];
ir_code code;
struct timeval current, last;
int do_repeat;

struct hardware hw_silitek=
{
	LIRC_DRIVER_DEVICE,       /* default device */
	-1,                       /* fd */
	LIRC_CAN_REC_LIRCCODE,    /* features */
	0,                        /* send_mode */
	LIRC_MODE_LIRCCODE,       /* rec_mode */
	24,                       /* code_length */
	silitek_init,             /* init_func */
	NULL,                     /* config_func */
	silitek_deinit,           /* deinit_func */
	NULL,                     /* send_func */
	silitek_rec,              /* rec_func */
	silitek_decode,           /* decode_func */
	NULL,                     /* readdata */
	"silitek"
};

int silitek_read(int fd, unsigned char *data, long timeout) {
        if(!waitfordata(timeout)) {
                return(0);
        }

        if(!read(fd, data, 1)) {
                return(0);
        }

        return(1);
}

int silitek_decode(struct ir_remote *remote,
		  ir_code *prep,ir_code *codep,ir_code *postp,
		  int *repeat_flagp,lirc_t *remaining_gapp)
{
        if(!map_code(remote, prep, codep, postp, 0, 0, 24, code, 0, 0)) {
		return(0);
	}

	if((current.tv_sec - last.tv_sec > 0) || (!do_repeat)) {
		*repeat_flagp = 0;
	}
	else {
		*repeat_flagp = 1;
	}

	LOGPRINTF(1,"code: %llx",(unsigned long long) *codep);
	LOGPRINTF(1,"rem: %lu",(unsigned long) remote->remaining_gap);

	return(1);
}

int silitek_init(void) {
	if(!tty_create_lock(hw.device)) {
		logprintf(LOG_ERR, "could not create lock files");
		return(0);
	}

	if((hw.fd = open(hw.device, O_RDWR | O_NOCTTY | O_NDELAY)) < 0) {
		logprintf(LOG_ERR, "could not open %s", hw.device);
		logperror(LOG_ERR, "silitek_init()");
		tty_delete_lock();
		return(0);
	}

        if(!tty_reset(hw.fd)) {
                logprintf(LOG_ERR,"could not reset %s", hw.device);
                silitek_deinit();
                return(0);
        }

        if(!tty_setbaud(hw.fd, 1200)) {
                logprintf(LOG_ERR,"could not set baud rate on %s", hw.device);
                silitek_deinit();
                return(0);
        }

	return(1);
}

int silitek_deinit(void) {
	close(hw.fd);
	tty_delete_lock();
	return(1);
}

char *silitek_rec(struct ir_remote *remotes) {
	char *m;
        int mouse_x;
        int mouse_y;
        char sign = 0x00; /* store sign of mouse direction. */
        char pos = 0x00;  /* store mouse direction. */

	do_repeat = 1;

        if(!silitek_read(hw.fd, &b[0], TIMEOUT)) {
		logprintf(LOG_ERR,"reading of byte 0 failed");
		logperror(LOG_ERR,NULL);
		return(NULL);
	}

        if((b[0] != 0x3f) && /* button down */
           (b[0] != 0x31) && /* button still down */
	   (b[0] != 0x2a) && /* button up */
           (b[0] != 0x7c) && /* mouse event */
           (b[0] != 0x7f) && /* mouse event, l+r-mouse button down */
           (b[0] != 0xfd) && /* mouse event, r-mouse button down */
           (b[0] != 0xfe)) { /* mouse event, l-mouse button down */
                return(NULL);
        }

	last = current;

        if(!silitek_read(hw.fd, &b[1], TIMEOUT)) {
		logprintf(LOG_ERR,"reading of byte 1 failed");
		logperror(LOG_ERR,NULL);
		return(NULL);
	}

        if(!silitek_read(hw.fd, &b[2], TIMEOUT)) {
		logprintf(LOG_ERR,"reading of byte 2 failed");
		logperror(LOG_ERR,NULL);
		return(NULL);
	}

        /* mouse event ? */
        if((b[0] == 0x7c) || (b[0] == 0x7f) || (b[0] == 0xfd) || (b[0] == 0xfe)) {
                /* if mouse was not moved check mouse-button state. */
                if((b[1] == 0x80) && (b[2] == 0x80)) {
                        switch(b[0]) {
                                case 0xfd:
                                        b[1] = 0xa0; /* r-mouse button */
                                        b[2] = 0xbb;
                                        break;
                                case 0xfe:
                                        b[1] = 0x0a; /* l-mouse button */
                                        b[2] = 0xbb;
                                        break;
                                case 0x7f:
                                        b[1] = 0xaa; /* l+r-mouse button */
                                        b[2] = 0xbb;
                                        break;
                        }
                }
                else {
                        /* calc mouse x movement */
                        mouse_x = b[1] & 0x1f;
                        /* calc mouse y movement */
                        mouse_y = b[2] & 0x1f;

                        /* if the joystick is pulled to the left */
                        if((b[1] & 0x20) == 0x20) {
                                mouse_x = 32 - mouse_x;
                                sign |= 0x10;
                        }

                        /* if the joystick is pulled up */
                        if((b[2] & 0x20) == 0x20) {
                                mouse_y = 32 - mouse_y;
                                sign |= 0x01;
                        }

                        /* calc mouse direction */
                        if((mouse_x > 0) && (mouse_y == 0)) pos = 0x01;
                        if((mouse_x > mouse_y) && (mouse_y > 0)) pos = 0x02;
                        if((mouse_x == mouse_y) && (mouse_x > 0)) pos = 0x03;
                        if((mouse_y > mouse_x) && (mouse_x > 0)) pos = 0x04;
                        if((mouse_y > 0) && (mouse_x == 0)) pos = 0x05;

                        b[1] = sign;
                        b[2] = pos;

			/* if only a small mouse movement don't set
			   repeat flag gets better control in lircmd
			   this way */
			if((mouse_x < 4) && (mouse_y < 4)) {
				do_repeat = 0;
			}
                }
                b[0] = 0xaa; /* set to indicate mouse event */
        }
        else {
		if(b[0] != 0x2a) {
			b[0] = 0xbb; /* set to indicate button down event */
		}
		else {
			b[0] = 0xcc; /* set to indicate button up event */
		}
        }

        code = ((ir_code)b[0] << 16) + ((ir_code)b[1] << 8) + (ir_code)b[2];
	gettimeofday(&current, NULL);

	m = decode_all(remotes);
	return(m);
}