configure

很少见的linux下的红外口的工具

  cat <<\EOF

Program names:
  --program-prefix=PREFIX            prepend PREFIX to installed program names
  --program-suffix=SUFFIX            append SUFFIX to installed program names
  --program-transform-name=PROGRAM   run sed PROGRAM on installed program names

X features:
  --x-includes=DIR    X include files are in DIR
  --x-libraries=DIR   X library files are in DIR

System types:
  --build=BUILD     configure for building on BUILD [guessed]
  --host=HOST       build programs to run on HOST [BUILD]
EOF
fi

if test -n "$ac_init_help"; then

  cat <<\EOF

Optional Features:
  --disable-FEATURE       do not include FEATURE (same as --enable-FEATURE=no)
  --enable-FEATURE[=ARG]  include FEATURE [ARG=yes]
  --disable-dependency-tracking Speeds up one-time builds
  --enable-dependency-tracking  Do not reject slow dependency extractors
  --enable-shared=PKGS  build shared libraries default=yes
  --enable-static=PKGS  build static libraries default=yes
  --enable-fast-install=PKGS  optimize for fast installation default=yes
  --disable-libtool-lock  avoid locking (might break parallel builds)
  --enable-maintainer-mode    enable maintainer specific things
  --disable-manage-devices    don't create and destroy devices automatically
  --disable-long-codes    use this if your compiler won't do long long
  --enable-debug          enable debugging features
  --disable-daemonize     disable daemons from daemonizing

Optional Packages:
  --with-PACKAGE[=ARG]    use PACKAGE [ARG=yes]
  --without-PACKAGE       do not use PACKAGE (same as --with-PACKAGE=no)
  --with-gnu-ld           assume the C compiler uses GNU ld default=no
  --with-pic              try to use only PIC/non-PIC objects default=use both
  --with-x                use the X Window System
  --with-kerneldir=DIR    kernel sources in DIR
  --with-driver=X         specify the driver to use, where X is one of:
                          none, any, act200l, animax, avermedia,
			  avermedia98, bestbuy, bestbuy2, caraca,
			  chronos, comX, dsp, cph03x, cph06x,
			  creative, fly98, flyvideo, hauppauge,
			  hauppauge_dvb, irdeo, irdeo_remote, irman,
			  irreal, it87, knc_one, logitech, lptX,
			  mediafocusI, packard_bell, parallel, pctv,
			  pixelview_bt878, pixelview_pak,
			  pixelview_pro, provideo, realmagic,
			  remotemaster, sa1100, serial, silitek, sir,
			  slinke, tekram, tekram_bt829, udp,
			  winfast_tv2000
  --with-devdir=DIR       Install device files in DIR (/dev)
  --with-moduledir=DIR    kernel modules in DIR (/lib/modules/`uname -r`/misc)
  --with-major=value      specify the device major for the driver (61)
  --with-port=port        specify the port number for the lirc device.
  --with-irq=irq          specify the irq line for the lirc device.
  --with-timer=value      specify the timer value for the parallel driver
  --with-tty=file         specify the tty to use (Irman, RemoteMaster, etc.)
  --without-soft-carrier  use this if your serial hw generates carrier
  --with-transmitter      use this if you use a transmitter diode
  --with-syslog=facility  use syslog instead of logfile

Some influential environment variables:
  CC          C compiler command
  CFLAGS      C compiler flags
  LDFLAGS     linker flags, e.g. -L<lib dir> if you have libraries in a
              nonstandard directory <lib dir>
  CPPFLAGS    C/C++ preprocessor flags, e.g. -I<include dir> if you have
              headers in a nonstandard directory <include dir>
  CPP         C preprocessor

Use these variables to override the choices made by `configure' or to help
it to find libraries and programs with nonstandard names/locations.

EOF
fi

if test "$ac_init_help" = "recursive"; then
  # If there are subdirs, report their specific --help.
  ac_popdir=`pwd`
  for ac_subdir in : $ac_subdirs_all; do test "x$ac_subdir" = x: && continue
    cd $ac_subdir
    # A "../" for each directory in /$ac_subdir.
    ac_dots=`echo $ac_subdir |
             sed 's,^\./,,;s,[^/]$,&/,;s,[^/]*/,../,g'`

    case $srcdir in
    .) # No --srcdir option.  We are building in place.
      ac_sub_srcdir=$srcdir ;;
    [\\/]* | ?:[\\/]* ) # Absolute path.
      ac_sub_srcdir=$srcdir/$ac_subdir ;;
    *) # Relative path.
      ac_sub_srcdir=$ac_dots$srcdir/$ac_subdir ;;
    esac

    # Check for guested configure; otherwise get Cygnus style configure.
    if test -f $ac_sub_srcdir/configure.gnu; then
      echo
      $SHELL $ac_sub_srcdir/configure.gnu  --help=recursive
    elif test -f $ac_sub_srcdir/configure; then
      echo
      $SHELL $ac_sub_srcdir/configure  --help=recursive
    elif test -f $ac_sub_srcdir/configure.ac ||
           test -f $ac_sub_srcdir/configure.in; then
      echo
      $ac_configure --help
    else
      echo "$as_me: WARNING: no configuration information is in $ac_subdir" >&2
    fi
    cd $ac_popdir
  done
fi

test -n "$ac_init_help" && exit 0
if $ac_init_version; then
  cat <<\EOF

Copyright 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001
Free Software Foundation, Inc.
This configure script is free software; the Free Software Foundation
gives unlimited permission to copy, distribute and modify it.
EOF
  exit 0
fi
exec 5>config.log
cat >&5 <<EOF
This file contains any messages produced by compilers while
running configure, to aid debugging if configure makes a mistake.

It was created by $as_me, which was
generated by GNU Autoconf 2.52.  Invocation command line was

  $ $0 $@

EOF
{
cat <<_ASUNAME
## ---------- ##
## Platform.  ##
## ---------- ##

hostname = `(hostname || uname -n) 2>/dev/null | sed 1q`
uname -m = `(uname -m) 2>/dev/null || echo unknown`
uname -r = `(uname -r) 2>/dev/null || echo unknown`
uname -s = `(uname -s) 2>/dev/null || echo unknown`
uname -v = `(uname -v) 2>/dev/null || echo unknown`

/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown`
/bin/uname -X     = `(/bin/uname -X) 2>/dev/null     || echo unknown`

/bin/arch              = `(/bin/arch) 2>/dev/null              || echo unknown`
/usr/bin/arch -k       = `(/usr/bin/arch -k) 2>/dev/null       || echo unknown`
/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown`
hostinfo               = `(hostinfo) 2>/dev/null               || echo unknown`
/bin/machine           = `(/bin/machine) 2>/dev/null           || echo unknown`
/usr/bin/oslevel       = `(/usr/bin/oslevel) 2>/dev/null       || echo unknown`
/bin/universe          = `(/bin/universe) 2>/dev/null          || echo unknown`

PATH = $PATH

_ASUNAME
} >&5

cat >&5 <<EOF
## ------------ ##
## Core tests.  ##
## ------------ ##

EOF

# Keep a trace of the command line.
# Strip out --no-create and --no-recursion so they do not pile up.
# Also quote any args containing shell meta-characters.
ac_configure_args=
ac_sep=
for ac_arg
do
  case $ac_arg in
  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
  | --no-cr | --no-c) ;;
  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) ;;
  *" "*|*"	"*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*)
    ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"`
    ac_configure_args="$ac_configure_args$ac_sep'$ac_arg'"
    ac_sep=" " ;;
  *) ac_configure_args="$ac_configure_args$ac_sep$ac_arg"
     ac_sep=" " ;;
  esac
  # Get rid of the leading space.
done

# When interrupted or exit'd, cleanup temporary files, and complete
# config.log.  We remove comments because anyway the quotes in there
# would cause problems or look ugly.
trap 'exit_status=$?
  # Save into config.log some information that might help in debugging.
  echo >&5
  echo "## ----------------- ##" >&5
  echo "## Cache variables.  ##" >&5
  echo "## ----------------- ##" >&5
  echo >&5
  # The following way of writing the cache mishandles newlines in values,
{
  (set) 2>&1 |
    case `(ac_space='"'"' '"'"'; set | grep ac_space) 2>&1` in
    *ac_space=\ *)
      sed -n \
        "s/'"'"'/'"'"'\\\\'"'"''"'"'/g;
    	  s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='"'"'\\2'"'"'/p"
      ;;
    *)
      sed -n \
        "s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p"
      ;;
    esac;
} >&5
  sed "/^$/d" confdefs.h >conftest.log
  if test -s conftest.log; then
    echo >&5
    echo "## ------------ ##" >&5
    echo "## confdefs.h.  ##" >&5
    echo "## ------------ ##" >&5
    echo >&5
    cat conftest.log >&5
  fi
  (echo; echo) >&5
  test "$ac_signal" != 0 &&
    echo "$as_me: caught signal $ac_signal" >&5
  echo "$as_me: exit $exit_status" >&5
  rm -rf conftest* confdefs* core core.* *.core conf$$* $ac_clean_files &&
    exit $exit_status
     ' 0
for ac_signal in 1 2 13 15; do
  trap 'ac_signal='$ac_signal'; { (exit 1); exit 1; }' $ac_signal
done
ac_signal=0

# confdefs.h avoids OS command line length limits that DEFS can exceed.
rm -rf conftest* confdefs.h
# AIX cpp loses on an empty file, so make sure it contains at least a newline.
echo >confdefs.h

# Let the site file select an alternate cache file if it wants to.
# Prefer explicitly selected file to automatically selected ones.
if test -z "$CONFIG_SITE"; then
  if test "x$prefix" != xNONE; then
    CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
  else
    CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
  fi
fi
for ac_site_file in $CONFIG_SITE; do
  if test -r "$ac_site_file"; then
    { echo "$as_me:1070: loading site script $ac_site_file" >&5
echo "$as_me: loading site script $ac_site_file" >&6;}
    cat "$ac_site_file" >&5
    . "$ac_site_file"
  fi
done

if test -r "$cache_file"; then
  # Some versions of bash will fail to source /dev/null (special
  # files actually), so we avoid doing that.
  if test -f "$cache_file"; then
    { echo "$as_me:1081: loading cache $cache_file" >&5
echo "$as_me: loading cache $cache_file" >&6;}
    case $cache_file in
      [\\/]* | ?:[\\/]* ) . $cache_file;;
      *)                      . ./$cache_file;;
    esac
  fi
else
  { echo "$as_me:1089: creating cache $cache_file" >&5
echo "$as_me: creating cache $cache_file" >&6;}
  >$cache_file
fi

# Check that the precious variables saved in the cache have kept the same
# value.
ac_cache_corrupted=false
for ac_var in `(set) 2>&1 |
               sed -n 's/^ac_env_\([a-zA-Z_0-9]*\)_set=.*/\1/p'`; do
  eval ac_old_set=\$ac_cv_env_${ac_var}_set
  eval ac_new_set=\$ac_env_${ac_var}_set
  eval ac_old_val="\$ac_cv_env_${ac_var}_value"
  eval ac_new_val="\$ac_env_${ac_var}_value"
  case $ac_old_set,$ac_new_set in
    set,)
      { echo "$as_me:1105: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5
echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;}
      ac_cache_corrupted=: ;;
    ,set)
      { echo "$as_me:1109: error: \`$ac_var' was not set in the previous run" >&5
echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;}
      ac_cache_corrupted=: ;;
    ,);;
    *)
      if test "x$ac_old_val" != "x$ac_new_val"; then
        { echo "$as_me:1115: error: \`$ac_var' has changed since the previous run:" >&5
echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;}
        { echo "$as_me:1117:   former value:  $ac_old_val" >&5
echo "$as_me:   former value:  $ac_old_val" >&2;}
        { echo "$as_me:1119:   current value: $ac_new_val" >&5
echo "$as_me:   current value: $ac_new_val" >&2;}
        ac_cache_corrupted=:
      fi;;
  esac
  # Pass precious variables to config.status.  It doesn't matter if
  # we pass some twice (in addition to the command line arguments).
  if test "$ac_new_set" = set; then
    case $ac_new_val in
    *" "*|*"	"*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*)
      ac_arg=$ac_var=`echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"`
      ac_configure_args="$ac_configure_args '$ac_arg'"
      ;;
    *) ac_configure_args="$ac_configure_args $ac_var=$ac_new_val"
       ;;
    esac
  fi
done
if $ac_cache_corrupted; then
  { echo "$as_me:1138: error: changes in the environment can compromise the build" >&5
echo "$as_me: error: changes in the environment can compromise the build" >&2;}
  { { echo "$as_me:1140: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&5
echo "$as_me: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&2;}
   { (exit 1); exit 1; }; }
fi

ac_ext=c
ac_cpp='$CPP $CPPFLAGS'
ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
ac_compiler_gnu=$ac_cv_c_compiler_gnu

case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in
  *c*,-n*) ECHO_N= ECHO_C='
' ECHO_T='	' ;;
  *c*,*  ) ECHO_N=-n ECHO_C= ECHO_T= ;;
  *)      ECHO_N= ECHO_C='\c' ECHO_T= ;;
esac
echo "#! $SHELL" >conftest.sh
echo  "exit 0"   >>conftest.sh
chmod +x conftest.sh
if { (echo "$as_me:1160: PATH=\".;.\"; conftest.sh") >&5
  (PATH=".;."; conftest.sh) 2>&5
  ac_status=$?
  echo "$as_me:1163: \$? = $ac_status" >&5
  (exit $ac_status); }; then
  ac_path_separator=';'
else
  ac_path_separator=:
fi
PATH_SEPARATOR="$ac_path_separator"
rm -f conftest.sh

if test "$#" = "0"; then
  if ! ./setup.sh; then
    echo "Please read the documentation!!!"
    exit 1
  fi
  trap - EXIT
  exit 0
fi

ac_aux_dir=
for ac_dir in $srcdir $srcdir/.. $srcdir/../..; do
  if test -f $ac_dir/install-sh; then
    ac_aux_dir=$ac_dir
    ac_install_sh="$ac_aux_dir/install-sh -c"
    break
  elif test -f $ac_dir/install.sh; then
    ac_aux_dir=$ac_dir
    ac_install_sh="$ac_aux_dir/install.sh -c"
    break
  elif test -f $ac_dir/shtool; then
    ac_aux_dir=$ac_dir
    ac_install_sh="$ac_aux_dir/shtool install -c"
    break
  fi
done
if test -z "$ac_aux_dir"; then
  { { echo "$as_me:1198: error: cannot find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." >&5
echo "$as_me: error: cannot find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." >&2;}
   { (exit 1); exit 1; }; }
fi
ac_config_guess="$SHELL $ac_aux_dir/config.guess"
ac_config_sub="$SHELL $ac_aux_dir/config.sub"
ac_configure="$SHELL $ac_aux_dir/configure" # This should be Cygnus configure.

# Find a good install program.  We prefer a C program (faster),
# so one script is as good as another.  But avoid the broken or
# incompatible versions:
# SysV /etc/install, /usr/sbin/install
# SunOS /usr/etc/install
# IRIX /sbin/install
# AIX /bin/install
# AmigaOS /C/install, which installs bootblocks on floppy discs
# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
# AFS /usr/afsws/bin/install, which mishandles nonexistent args