tc-readme

来自「C语言版本的矩阵库」· 代码 · 共 185 行

From [e-mail] Fri Jun  9 03:54:33 1995
Received: from jumpjibe.stanford.edu (jumpjibe.Stanford.EDU [36.4.0.23]) by gluttony.isc.tamu.edu (8.6.11/8.6.11) with ESMTP id DAA18702 for <[e-mail]>; Fri, 9 Jun 1995 03:54:31 -0500
Received: (from boyer@localhost) by jumpjibe.stanford.edu (8.6.10/8.6.10) id BAA13677 for [e-mail]; Fri, 9 Jun 1995 01:54:48 -0700
Message-Id: <[e-mail]>
From: [e-mail] (Brent Boyer)
Date: Fri, 9 Jun 1995 01:54:48 PDT
In-Reply-To: David Stewart <[e-mail]>
       "Re: Meschach setup question" (Jun  8, 19:07)
X-Mailer: Mail User's Shell (7.2.0 10/31/90)
To: David Stewart <[e-mail]>
Subject: second additional message
Content-Length: 6352
X-Lines: 168
Status: RO

dave,

	below is the text for a file I call "Mac/TC README" which
explains everything I did to get it running.

	-brent





/*




Introduction					-- Brent Boyer 6/7/95
_____________________


I have found a procedure which gets the Meschach routines to work on a Macintosh with THINK C 7.0.4.
My system is a Quadra 650 running MacOS 7.5.1.  The compile options described below should work for
any 68K Mac with a floating point unit; they probably have to be modified for Power Macs
(in particular, check the floating point type mapping and precision).

	(Note: THINK C is now on version 8.x, perhaps they have fixed some of the terrible features of
			the 7.x release; Metrowerk's CodeWarrior is supposed to be a better development environment
			and it allegedly can easily translate THINK C projects)


	
			
Procedure
_____________________


Note: all projects described here should have the folowing options made under "Set Project Type..."
(which is found under the "Project" menu):
	1)  "Application" type 
	2)  "Far CODE" and "Far DATA" checked
	3)  Partition should be raised from 384 to 4000 (required to get all the *tort*.c projects to run)
	4)  Under "SIZE Flags", you can set "32-Bit Compatible" but leave the rest unchecked


Step #1
_________

	Create an appropriate version of THINK's ANSI library.
			
		 -- first, you will have to modify two of Symantecs "Standard Library" files to let the
		 	function "isascii" become available (this function is required in "err.c")
		 	
			1)  in THINK's file "ctype.h" add this code in the appropriate places:
					a)  int	isascii(int);
					b)  #define isascii(c)	((unsigned)(c)<=0177)
					
			2)  in THINK's file "ctype.c" add this code:
					a)  int
						(isascii)(int c)
						{
							return (isascii(c));
						}
	
	What I next did was copy their project "ANSI" to one I called "ANSI (for Meschach)".  I then selected
	these compiler ("THINK C...") options before bringing the project up to date:

		 -- first, under "Language Settings"
			1)  choose "Factory Settings"
			2)  also change "Infer prototypes" to "Require prototypes"
				(as a former Pascal programmer, I curse the person who introduced infered prototypes!)
				
			(Note: you _cannot_ choose "ANSI Settings"; if you do, then the compilation of the ANSI project
			 will fail!  Talk to the people at Symantec about this one ...)

		-- then, under "Compiler Settings"
			1) turn "Generate 68020 instructions" ON
			2) turn "Generate 68881 instructions" ON
			3) turn "4-byte ints" ON (so int == long int <==> 32 bits)
			4) make sure that "8-byte doubles" turned OFF (so double == long double)
			5) turn "Native floating-point format" ON
		
			(The other options probably do not matter either way)
			
			(Note: 2) and 5) ==> type double will be the 96 bit MC68881 floating point extended precision type;
					these options give the best speed and good accuracy too)
					
			(Also: this 96 bit floating point type will cause the test in "memtort.c" to wrongly report that
					756 blocks were allocated when only 516 should have been)

		-- optionally, under "Code Optimization"
			1) turn "Use Global Optimizer" ON


Step #2
_________

	Next create an appropriate version of THINK's UNIX library.  What I did was copy their project
	"unix" to one I called "unix (for Meschach)".  Build this project with the same "Language Settings"
	and "Compiler Settings" options described in Step #1.


Step #3
_________

	Correct some errors in the "Meschach" source code files:
	
	1) the function "Mmmtr" in the file "extras.c" has an error in the line
				Mmv(n,p,alpha,&(A[i][Aj0]),B,Bj0,&(C[i][Cj0]));
		the correct line should read
				Mmv(n,p,alpha,B,Bj0,&(A[i][Aj0]),1.0,&(C[i][Cj0]));
	2) the function "px_sign" in the file "pxop.c" will not compile unless the line
				numtransp = myqsort(px2->pe, px2->size);
		is replaced with
				numtransp = myqsort( (int *) px2->pe, px2->size );
	3) the function "chk_col_access" in the file "sptort.c" conflicts with the same named function
		in the file "spbkp.c".  This causes a link error.  To solve this problem, I suggest renaming it as
				chk_col_access -> chk_col_accessSPT
				
	(Dave Stewart tells me that these errors are corrected (along with other stuff?) in a
	to-be-released version of "Meschach".)


Step #4
_________

	Ideally, you would next create a single large library containing all the Meschach routines.  Unfortunately,
	you cannot do this because THINK C requires libraries to either be, or be built from, single segment projects,
	and individual segments can only have 32K of compiled code size, which is way too small for all the
	Meschach routines.
	
	Instead, what I had to do was create 7 smaller, single segment projects.  I added code to the segments
	strictly in alphabetical order, with no regard to partitioning (i.e. putting similar routines together).
	
	To make each such project, I first opened a new project ("ANSI Project" type) and then added alot of
	source code files.  I then selected these compiler ("THINK C...") options before bringing the project
	up to date:
	
		-- first, under "Language Settings"
			1)  choose "ANSI Settings" (tragically, will have to leave "Infer prototypes" on)
		
		-- next, under "Compiler Settings", make the same choices as when compiled "ANSI (for Meschach)"
			1) turn "Generate 68020 instructions" ON
			2) turn "Generate 68881 instructions" ON
			3) turn "4-byte ints" ON (so int == long int <==> 32 bits)
			4) make sure that "8-byte doubles" turned OFF (so double == long double)
			5) turn "Native floating-point format" ON

	If the resulting single segment was over 32K, I removed files from the bottom of the list until the segment
	had < 32K left.  The file "main.c" which was automatically generated was also removed.
		
	
	Note:  I never added the *tort*.c files or any of the other files with a main routine (e.g. "maxint.c")
			in them to these projects.  The *tort*.c files were made into separate projects.  In order to
			echo the screen output to a file when running the torture tests, you need to add these lines
			to each *tort*.c file:
				a)  #include	<console.h>					(put near top)
				b)  cecho2file("filename", 0, stdout);		(put inside main)




You should then be able to simply add all these projects to any of your own projects -- this will give you the
whole library.




*/