ez_eng.inc

很管用的GIS控件

  { (c) 2002 EzGis - EzGis main constants }

  { Command line commands }
  SCommand = 'Command: ';

  SFeature= 'Feature';
  SRange= 'Range';
  SFrequency= 'Frequency';
  SSymbolCaption = 'SYMBOL %d';
  SLinetypeCaption = 'LINETYPE %d';
  SScaleFmt = 'Scale = %.3f %%';
  STranslateFmt = 'DX = %.3f, DY = %.3f, < %.3f';
  SRotateFmt = '< %.3f';
  SNewEntityInfo = '< %.*n, DX = %.*n, DY = %.*n, Area = %.*n, Dist = %.*n';
  SIsInvalidFloatValue = 'Invalid floating point value %s';
  SIsInvalidIntegerValue = 'Invalid integer value %s';
  SIsInvalidBoolValue = 'Invalid boolean value %s';
  SLauncher= 'Launcher';
  SDragDropClick= 'Click desired entity that you wish to drag';
  STextRefPtFirst= 'Please define location of text';
  SIndivClickToEdit= 'Click desired entity on the map to show/edit information';
  SEntityClickCaption= 'Click an entity on the map';
  SSymbolTextCaption= 'Symbol text';
  SSymbolText= 'Text :';
  SUnconnectedDrawBox= 'The Component is not connected to a TEzBaseDrawBox';
  SMsgConfirm= 'Confirm';
  SMsgError= 'Error';
  SMsgWarning= 'Warning';
  SMsgInfo= 'Information';
  SWrongBuffer= 'Cannot create a buffer from this polyline';
  SCannotCreateBuffer= 'Cannot create buffer for this kind of entity';
  SCannotContainParams= 'Field %s of datatabase cannot have parameters !';
  SWrongLayername= 'Wrong layer name %s, or layer is not visible or editable';
  SWrongParameters= 'Parameter(s) invalid for function %s';
  SExprParserError= ' %s at line : %d, Column: %d, token: %s';
  SBadExtension= 'Corner coords are wrong !' + CrLf +
                 'First corner must be at lower left';
  SRestNotExclusive= 'Cannot open file in exclusive mode !';
  SRestructuring= 'Restructuring table';
  SDuplicateLayer= 'Layer name already exists or' + CrLf + 'there is a file with same name on disk.';
  SRecnoInvalid= 'Recno out of range';
  SRebuildTree= 'Rebuilding r-tree %s...';
  SDBFNotFound= 'Base datafile of this layer cannot be found.' + CrLf +
                'The layer is kept without an attached DBF file';
  SUpdateExtension= 'Updating layer %s';
  SThereAreNoDeleted= 'There are no deleted entities. Do you wish to' + CrLf +
                     'continue to do an evaluation of this file ?';
  SPackingLayer= 'Packing layer...';
  SWrongRecordsRecover= 'Cannot recover %d damaged records';
  SExprFail= 'Expression is not of boolean type !';
  SCannotDeleteLayer= 'Layer cannot be deleted.' + CrLf +
                      'Probably is being used in a network';
  SInternalListError= 'Internal list error';
  SLayerFilesNotFound= 'Cannot found the formerly files of this layer %s !' + CrLf +
                       'The layer is deleted from the map';
  SPrinterIsBusy= 'Printer is busy';
  SGISListError= 'Wrong Index in DrawBoxList';
  SGISUnassigned= 'Unassigned';

  SEzImplMissed= 'You must include unit ezimpl.pas in your project';
  SNoGISDefined= 'No basic component linked';
  SSelectinLayer= 'Selecting layer ';
  SEntityNotClosed= 'Entity is not closed. Cannot clip';
  SMultiPartNotSupported= 'Multi-part entities not supported in this release';
  SLayerNotFound= 'Layer name not found';
  SCannotGroup= 'Can group entities from same layer only';

  SUndoDelete= 'Undo erase';
  SUndoInsert= 'Undo insert';
  SCannotUndo= 'Cannot undo';
  SUndoTransform= 'Undo transform';

  SFlatScrollBarNotAllowed='Flat ScrollBar cannot be used ' +CrLf+
                           'the version of COMCTL32.dll in this system is lower than 4.71';

  SEntityOutOfBound= 'Entity number out of range !';
  SInvalidSymbolFile= 'Wrong file format for symbols';
  SSymbolOutOfBound= 'Symbol number out of range !';

  SInvalidSymbolVersion= 'File version is wrong !';
  SWrongImageFormat= 'This file format is not supported';

  SEntListIndexError= 'List index out of bounds';
  SEntListCountError= 'List count error';
  SEntListCapacityError= 'Capacity error';
  SVectorOutOfBound= 'Vector out of bound';


  SDefineFromPoint= 'From point :';
  SDefineToPoint= 'To point :';
  SFirstPoint= 'First point :';
  SSecondPoint= 'Second point :';
  SThirdPoint= 'Third point :';
  SFourthPoint= 'Fourth point :';
  SFifthPoint= 'Fifth point :';
  SNextPoint= 'Next point :';
  SClipPolygon= 'Clipping entity, '; // 'Clip Polygon, ';
  SCircleCenter= 'Center :';
  SCircleRadius= 'Radius :';
  SArcSweepAngle= 'Define sweep angle:';
  SCircleEndPoint= 'Identify First Arc End Point';


  SRealTimeZoom= 'Press Pick button and drag vertically to zoom';

  SDefineFirstZoomPoint= 'First corner';
  SDefineSecondZoomPoint= 'other corner';

  SNotEnoughData= 'Need more points to build entity !';

  SStartSingleSelect= 'Click an entity to select. SHIFT for single select';

  SDefineBasePoint= 'Base point :';
  SDefineEndPoint= 'Last point :';

  SReferenceFirstPoint= 'Reference length, first point :';
  SReferenceSecondPoint= 'Referenge length, second point :';
  STransformLastPoint= 'Last point :';
  SRotTransformLastPoint= 'Last point or angle :';

  SDefineSecondSelection= 'Other corner of selection';
  SWarnNoSelection= 'No entities selected !';
  SVertexSingleEntityError= 'Only one entity must be selected for the operation !';
  SInsertVertexPoint= 'Click in the new point for the selected vertex';
  SVertexEntityBadError= 'You can add vertexes to Polylines and Polygons only !';
  SChangeGridOrigin= 'Please click the new Grid Origin :';
  SShowHintCaption= 'Move mouse over an entity, then click for show hint. Click again for stacked entities. <Esc> finish';
  SVectorialFirstPt= 'Define area. First corner:';
  SVectorialSecondPt= 'Define area. Other corner:';


  SSelectRefEntity= 'Please select the reference entity';
  SBreakSelectFirstPoint= 'Select first point of entity';
  SBreakSelectSecndPoint= 'Select second point';
  SBreakWrongSelection= 'You must pick on same entity';
  SBreakWrongEntity= 'Cannot break this entity';
  SBreakNotClicked= 'No entities found';
  STrimNoCuttingEdge= 'No cutting edge selected yet';
  SExtendNoExtendEdge= 'No extend edge selected yet';
  STrimSelectEnt = 'Select entity to trim';
  SExtendSelectEnt= 'Select entity to extend';
  STrimWrongEntity= 'Cannot trim this entity';
  SExtendWrongEntity= 'Cannot extend this entity';
  SExtendWrongSegment= 'Cannot extend this segment';
  STrimOnlyOneCuttingEdge= 'Supported only one cutting edge';
  SExtendOnlyOneCuttingEdge= 'Supported only one extending edge';
  SFilletWrongEntity= 'Cannot fillet this entity';
  SFilletNotContiguous= 'No contiguous segments picked';
  STrimCuttingEdge= 'Cannot trim the cutting edge';
  SFirstExtensionLine= 'First extension line origin';
  SSecondExtensionLine= 'Second extension line origin';
  SDefineTextLocation= 'Text Location';


  SBlobErrNotEditing= 'Dataset not in edit or insert mode';
  SCannotOpenDesignMode= 'Cannot open on design mode';
  SLayerNotAssigned= 'Layer property is not assigned or is not visible';
  SLayerEmpty= 'Layer name is not defined';
  SExpressionEmpty= 'Expression or field name cannot be empty';
  SWrongFieldnameCol= 'Wrong field name column %d';
  SGetRecordInvalid= 'Error reading record';
  SInsertNotAllowed= 'Insertion is not allowed';
  SWrongReadOnly= 'Cannot change readonly property when dataset is active';

  SLatLonMismatch= 'Destination file is in different coordinate system' + CrLf +
                   'Action canceled';
  SWrongProjParams= 'Parameters for the projection are wrong';
  SWrongProjector= 'Projector property not defined';
  SLayerAlreadyExists= 'There is a layer with same name.'+CrLf+
                       'Do you want to replace existing layer ?';