motelist-linux

tinyos最新版

#!/usr/bin/perl
#
# Reads /proc/bus/usb/devices and selectively lists and/or
# interprets it with /proc/tty/driver/usb-serial to determine which
# motes are connected on which virtual comm ports at /dev/ttyUSB*
#
# Written by Joe Polastre
#
# $Id: motelist-linux,v 1.1 2004/07/25 02:25:18 jpolastre Exp $
#

use Getopt::Std;

sub custom {
  (split /\t/,$a)[1] <=>
      (split /\t/,$b)[1];
}

$DEVFILENAME = "/proc/bus/usb/devices";
$DRIVERFILENAME = "/proc/tty/driver/usb-serial";
$PROGNAME = $0;
$debug = 0;

if (@ARGV > 0) {
  $help = getopts('hclf:');
  if ($opt_h == 1) {
	print "usage: $0 [-l] [-c] [-f <file>]\n\n";
	print '  $Revision: 1.1 $ $Date: 2004/07/25 02:25:18 $' . "\n\n";
	print "options:\n";
	print "  -h  display this help\n";
	print "  -l  long format, also display disconnected devices\n";
	print "  -c  compact format, not pretty but easier for parsing\n";
        print "  -f  use file specified for 'usb-serial' instead of /proc/tty/driver\n";
	exit(0);
  }
}

if (! open (DEVNUM, "<$DEVFILENAME"))
{
	print "$PROGNAME: cannot open '$DEVFILENAME'\n";
	exit 1;
}
if ($opt_f) {
  if (! open (DRIVERNUM, "<$opt_f"))
  {
	print "$PROGNAME: cannot open '$DRIVERFILENAME'\n\n";
        print "make sure that $DRIVERFILENAME is world readable by either\n";
	print "running $0 as root or setting up a cron job to copy\n";
	print "/proc/tty/driver/usb-serial to /tmp periodically\n\n";
	print "use '$0 -h' for help\n";
	exit 1;
  }
}
else {
  if (! open (DRIVERNUM, "<$DRIVERFILENAME"))
  {
	print "$PROGNAME: cannot open '$DRIVERFILENAME'\n\n";
        print "make sure that $DRIVERFILENAME is world readable by either\n";
	print "running $0 as root or setting up a cron job to copy\n";
	print "/proc/tty/driver/usb-serial to /tmp periodically\n\n";
	print "use '$0 -h' for help\n";
	exit 1;
  }
}

$showconfig = "yes";
$currentlevel = 0;
$portstr = "";


while ($line = <DEVNUM>)	# read a text line from DEVNUM
{
        $origline = $line;
	# skip all lines except those we recognize:
	if (($line !~ "^C:")		# Configuration: one is active
		    && ($line !~ "^D:")	# Device:
		    && ($line !~ "^I:")	# Interface: protocol group
		    && ($line !~ "^S:") # String: used with root hub
		    && ($line !~ "^T:")	# Topology: starts each device
		    && ($line !~ "^P:")	# Product : vendor and prod id
		    )
	{
		next;	# to the next line
	}

	chomp $line;		# remove line endings

	# First convert '=' signs to spaces.
	$line =~ tr/=/ /;

	# and convert all '(' and ')' to spaces.
	$line =~ tr/(/ /;
	$line =~ tr/)/ /;

	# split the line at spaces.
	@fields = split / +/, $line;

	# T:  Bus=01 Lev=01 Prnt=01 Port=03 Cnt=01 Dev#=  3 Spd=1.5 MxCh= 0
	if ($line =~ "^T:")
	{
		# split yields: $bus, $level, $parent, $port, $count, $devnum, $speed, $maxchild.

		$bus    = @fields [2];
		$level  = @fields [4];
		$parent = @fields [6];		# parent devnum
		$port   = @fields [8] + 1;	# make $port 1-based
		$count  = @fields [10];
		$devnum = @fields [12];
		$speed  = @fields [14];
		$maxchild = @fields [16];

		if (($level == 0) && ($currentlevel == 0)) {
		    $portstr = $port;
		    $currentlevel = $level;
		}
                elsif ($level > $currentlevel) {
		    $portstr = $portstr . "." . $port;
		    $currentlevel = $level;
		}
		elsif ($level <= $currentlevel) {
		    @portsplit = split /\./, $portstr;
                    $portstr = @portsplit[0];
		    for ($i = 1; $i < $level; $i++) {
			$portstr = $portstr . "\." . @portsplit[$i];
		    }
		    $portstr = $portstr . "\." . $port;
		    $currentlevel = $level;
		}

		$devclass = "?";
		$intclass = "?";
		$driver   = "?";
		$ifnum    = "?";
		$showclass = "?";	# derived from $devclass or $intclass
		$lastif = "?";			# show only first altsetting
		$HCtype = "?";
                $vendor = "?";
                $prodid = "?";
		$showconfig = "no";
		$nconfig = "0";
		next;
	} # end T: line

        elsif ( $line =~ "^P:" ) {
	    $vendor = @fields[2];
            $prodid = @fields[4];
            next;
        }

	# only show the _active_ configuration
	# C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=100mA
	elsif ( $line =~ "^C:" ) {
	    if ( $line =~ "^C:\\*" ) {
		$showconfig = @fields[4];
	    } else {
		$showconfig = "no";
	    }
	    next;
	}

	# D:  Ver= 1.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
	elsif ($line =~ "^D:")
	{ # for D: line
		$devclass = @fields [5];
		$nconfig = @fields [13];
		next;
	}

	# in case this is a root hub, look at the device strings.
	#  - S:  Manufacturer:Linux 2.6.5 ehci_hcd	[all 2.6]
	#  - S:  Product=USB UHCI Root Hub 		[all 2.4, 2.2]
	#  - S:  Product=OPTi Inc 82C861		[2.6/PCI_NAMES]
	elsif ( $line =~ "^S:" )
	{ # for S: line
		if ( $level == 00 && $line =~ "hcd" )
		{
		    $HCtype = @fields [4];
		}
		elsif ( $level == 00 && $line =~ "HCI" && $HCtype eq "?")
		{
		    $HCtype = @fields [3];
		}
                elsif ( ($line =~ "Product") && ($vendor = "0403") ) 
		{
		    chomp($origline);
		    @temparr = split /^S:  Product=/, $origline;
		    $product = @temparr[1];
		    chomp($product);
                }
                  
                elsif ( ($line =~ "SerialNumber") && ( $vendor == "0403" )) 
                {
		    @temparr = split /\./, $portstr;
		    $temparrlen = @temparr;
		    $realstr = @temparr[1];
		    for ($i = 2; $i < $temparrlen; $i++) {
			$realstr = $realstr . "\." . @temparr[$i];
		    }
		    push ( @serialnums, @fields[2] );
                    push ( @deviceids, $realstr );
		    push ( @productids, $product );
                }
		next;
	}

	# the rest of this code:
	#  - only shows interface descriptors
	#  - for the active configuration
	#  - for the first (prefer: active!) altsetting
	elsif ( ! ( $line =~ "^I:" )
		|| "$showconfig" eq "no") {
	    next;
	}

	
	# I:  If#= 0 Alt= 0 #EPs= 1 Cls=03(HID  ) Sub=01 Prot=02 Driver=hid
	$intclass = @fields [9];
	$ifnum    = @fields [2];
	$driver   = @fields [15];

	if (($devclass eq ">ifc") || ($devclass eq "unk."))
	{	# then use InterfaceClass, not DeviceClass
		$showclass = $intclass;
	}
	else
	{	# use DeviceClass
		$showclass = $devclass;
	}

	if ($level == 0)
	{
	    # substitute real driver name
	    if ( $HCtype =~ "UHCI-alt" )
	    {
		$HC = "uhci";
	    }
	    elsif ( $HCtype =~ "UHCI" )
	    {
		$HC = "usb-uhci";
	    }
	    elsif ( $HCtype =~ "OHCI" )
	    {
		$HC = "usb-ohci";
	    }
	    else
	    {
		$HC = $HCtype;
	    }

	    if ($debug != 0) {
		print sprintf ("/:  Bus $bus.Port $port: Dev $devnum, Class=root_hub, Driver=%s/%sp, %sM\n",
			 $HC, $maxchild, $speed );
	    }
	}
	elsif ($lastif ne $ifnum)
	{
		$temp = $level;
		if ($debug != 0) {
		    while ($temp >= 1)
		    {
			print "    ";
			$temp--;
		    }

		    if ($nconfig ne "1") {
			$temp = " Cfg $showconfig/$nconfig";
		    } else {
			$temp = "";
		    }

		    print sprintf ("|__ Port $port: Dev $devnum$temp, If $ifnum, Class=$showclass, Driver=$driver%s, %sM\n",
				   ($maxchild == 0) ? "" : ("/" . $maxchild . "p"),
				   $speed);
		}
	   
		$lastif = $ifnum;
	}
} # end while DEVNUM

close (DEVNUM);

$count = @serialnums;
while ($line = <DRIVERNUM>)	# read a text line from DEVNUM
{
    for ($i = 0; $i < $count; $i++) {
	if ($line =~ $deviceids[$i]) {
	    @temparr = split ":", $line;
	    @devaddress[$i] = @temparr[0];
	}
    }
}

close (DRIVERNUM);

for ($i = 0; $i < $count; $i++) {
    @sortarray[$i] = $serialnums[$i] . "\t" . $devaddress[$i] . "\t" . $productids[$i];
}

@sorted = sort custom @sortarray;

if ($opt_c != 1) {
    print "Reference  \tCommPort   \tDescription\n";
    print "---------- \t---------- \t----------------------------------------\n";
}

for ($i = 0; $i < $count; $i++) {
    $temp = @sorted[$i];
    @fields = split /\t/,$temp;
    if ($opt_c == 1) {
      print @fields[0] . ",/dev/ttyUSB" . @fields[1] . ",0," . @fields[2] . "\n";
    }
    else {
      print @fields[0] . "\t/dev/ttyUSB" . @fields[1] . "\t" . @fields[2] . "\n";
    }
}

# END.