makefile

linux平台上的开放源代码的网络摄像机程序.实现视频捕捉,传输以及云台控制等.非常具有参考价值.

# Set up the Axis specific devices for an eLinux product
#
# $Id: Makefile,v 1.7 2001/05/12 10:39:10 pkj Exp $

include $(APPS)/Rules.elinux

MKNOD     = mknod_elinux
DEV       = $(prefix)/dev

install:
#
#       First the character devices...
#
	@echo "CLINUX flash devices using MTD subsystem"
# 0= /dev/mtd0 (rw) 1= /dev/mtdr0 (ro) etc. for character devices

	@$(MKNOD) -m 0644           $(DEV)/cflash0   c  90   0
	@$(MKNOD) -m 0644           $(DEV)/cflash1   c  90   2
	@$(MKNOD) -m 0644           $(DEV)/cflash2   c  90   4
	@$(MKNOD) -m 0644           $(DEV)/cflash3   c  90   6

#
#       then the block devices... /dev/rom0
#       0-7 is rw, 8- is ro for the block devices
	@$(MKNOD) -m 0644           $(DEV)/flash0    b  31   0
	@$(MKNOD) -m 0644           $(DEV)/flash1    b  31   1
	@$(MKNOD) -m 0644           $(DEV)/flash2    b  31   2
	@$(MKNOD) -m 0644           $(DEV)/flash3    b  31   3

#       More character devices...
#        
	@$(MKNOD) -m 0444           $(DEV)/cam0      c  61   0
	@$(MKNOD) -m 0444           $(DEV)/cam1      c  61   1
	@$(MKNOD) -m 0444           $(DEV)/cam2      c  61   2
	@$(MKNOD) -m 0444           $(DEV)/cam3      c  61   3
	@$(MKNOD) -m 0444           $(DEV)/camquad   c  61  32

	@$(MKNOD) -m 0666           $(DEV)/ircontrol c  62   0

	@$(MKNOD) -m 0666           $(DEV)/syncser_old c 63  0	

	@$(MKNOD) -m 0666           $(DEV)/gpioa     c 120   0
	@$(MKNOD) -m 0666           $(DEV)/gpiob     c 120   1
	@$(MKNOD) -m 0666           $(DEV)/leds      c 120   2

	@$(MKNOD) -m 0664           $(DEV)/rtc       c 121   0

	@$(MKNOD) -m 0644           $(DEV)/eeprom    c 122   0

	@$(MKNOD) -m 0644           $(DEV)/i2c       c 123   0

	@$(MKNOD) -m 0666 -g tty    $(DEV)/ttyBT0    c 124   0
	@$(MKNOD) -m 0666 -g tty    $(DEV)/ttyBT1    c 124   1
	@$(MKNOD) -m 0666 -g tty    $(DEV)/ttyBT2    c 124   2
	@$(MKNOD) -m 0666 -g tty    $(DEV)/ttyBT3    c 124   3
	@$(MKNOD) -m 0666 -g tty    $(DEV)/ttyBT4    c 124   4
	@$(MKNOD) -m 0666 -g tty    $(DEV)/ttyBT5    c 124   5
	@$(MKNOD) -m 0666 -g tty    $(DEV)/ttyBT6    c 124   6
	@$(MKNOD) -m 0666 -g tty    $(DEV)/ttyBTC    c 124   7

	@$(MKNOD) -m 0666           $(DEV)/syncser0  c 125   0
	@$(MKNOD) -m 0666           $(DEV)/syncser1  c 125   1
#       My character devices...
#	@$(MKNOD) -m 0666           $(DEV)/csp0      c 137   0

	@$(MKNOD) -m 0666           $(DEV)/ccamrw   c 126   1
	@$(MKNOD) -m 0666           $(DEV)/ccami2c  c 126   2
	@$(MKNOD) -m 0444           $(DEV)/ccam.raw c 126   3
	@$(MKNOD) -m 0666           $(DEV)/ccam_dma.raw c 126   4
	@$(MKNOD) -m 0666           $(DEV)/ccammcp c 126   5