combine.shar

这是广泛使用的通信开源项目,对于大容量,高并发的通讯要求完全能够胜任,他广泛可用于网络游戏医学图像网关的高qos要求.更详细的内容可阅读相应的材料

  $shar_touch -am 03191459100 'page03.pre' &&
  chmod 0664 'page03.pre' ||
  $echo 'restore of' 'page03.pre' 'failed'
  if ( md5sum --help 2>&1 | grep 'sage: md5sum \[' ) >/dev/null 2>&1 \
  && ( md5sum --version 2>&1 | grep -v 'textutils 1.12' ) >/dev/null; then
    md5sum -c << SHAR_EOF >/dev/null 2>&1 \
    || $echo 'page03.pre:' 'MD5 check failed'
134a60947715be2de3ca2589a3e652e2  page03.pre
SHAR_EOF
  else
    shar_count="`LC_ALL= LC_CTYPE= LANG= wc -c < 'page03.pre'`"
    test 395 -eq "$shar_count" ||
    $echo 'page03.pre:' 'original size' '395,' 'current size' "$shar_count!"
  fi
fi
# ============= page04.pre ==============
if test -f 'page04.pre' && test "$first_param" != -c; then
  $echo 'x -' SKIPPING 'page04.pre' '(file already exists)'
else
  $echo 'x -' extracting 'page04.pre' '(text)'
  sed 's/^X//' << 'SHAR_EOF' > 'page04.pre' &&
<P>
Ok, finally we get to main().  Sorry for the diversion but it was
important to lay some of that groundwork before getting here.
<P>
<HR WIDTH="100%">
SHAR_EOF
  $shar_touch -am 03191459100 'page04.pre' &&
  chmod 0664 'page04.pre' ||
  $echo 'restore of' 'page04.pre' 'failed'
  if ( md5sum --help 2>&1 | grep 'sage: md5sum \[' ) >/dev/null 2>&1 \
  && ( md5sum --version 2>&1 | grep -v 'textutils 1.12' ) >/dev/null; then
    md5sum -c << SHAR_EOF >/dev/null 2>&1 \
    || $echo 'page04.pre:' 'MD5 check failed'
8989e75934f20e9b74d38a2d3687613a  page04.pre
SHAR_EOF
  else
    shar_count="`LC_ALL= LC_CTYPE= LANG= wc -c < 'page04.pre'`"
    test 154 -eq "$shar_count" ||
    $echo 'page04.pre:' 'original size' '154,' 'current size' "$shar_count!"
  fi
fi
# ============= page05.pre ==============
if test -f 'page05.pre' && test "$first_param" != -c; then
  $echo 'x -' SKIPPING 'page05.pre' '(file already exists)'
else
  $echo 'x -' extracting 'page05.pre' '(text)'
  sed 's/^X//' << 'SHAR_EOF' > 'page05.pre' &&
<P>
The Task is the only object we've not been through yet.  I'll go ahead
and show both the header and cpp on this one page since the header
isn't very large.
<P>
<HR WIDTH="100%">
SHAR_EOF
  $shar_touch -am 03191459100 'page05.pre' &&
  chmod 0664 'page05.pre' ||
  $echo 'restore of' 'page05.pre' 'failed'
  if ( md5sum --help 2>&1 | grep 'sage: md5sum \[' ) >/dev/null 2>&1 \
  && ( md5sum --version 2>&1 | grep -v 'textutils 1.12' ) >/dev/null; then
    md5sum -c << SHAR_EOF >/dev/null 2>&1 \
    || $echo 'page05.pre:' 'MD5 check failed'
ed1b82e232cc376efa7b78f391c893bd  page05.pre
SHAR_EOF
  else
    shar_count="`LC_ALL= LC_CTYPE= LANG= wc -c < 'page05.pre'`"
    test 182 -eq "$shar_count" ||
    $echo 'page05.pre:' 'original size' '182,' 'current size' "$shar_count!"
  fi
fi
# ============= page06.pre ==============
if test -f 'page06.pre' && test "$first_param" != -c; then
  $echo 'x -' SKIPPING 'page06.pre' '(file already exists)'
else
  $echo 'x -' extracting 'page06.pre' '(text)'
  sed 's/^X//' << 'SHAR_EOF' > 'page06.pre' &&
<P>
Once again, we come to the end of a tutorial.  By creating a simple
specialization of ACE_Message_Block, we've been able to remove a lot
of complexity and erorr potential from our previous implementation.
<UL>
<LI><A HREF="Makefile">Makefile</A>
<LI><A HREF="message_queue.cpp">message_queue.cpp</A>
<LI><A HREF="work.h">work.h</A>
<LI><A HREF="block.h">block.h</A>
<LI><A HREF="task.h">task.h</A>
<LI><A HREF="task.cpp">task.cpp</A>
</UL>
<P>
SHAR_EOF
  $shar_touch -am 03191459100 'page06.pre' &&
  chmod 0664 'page06.pre' ||
  $echo 'restore of' 'page06.pre' 'failed'
  if ( md5sum --help 2>&1 | grep 'sage: md5sum \[' ) >/dev/null 2>&1 \
  && ( md5sum --version 2>&1 | grep -v 'textutils 1.12' ) >/dev/null; then
    md5sum -c << SHAR_EOF >/dev/null 2>&1 \
    || $echo 'page06.pre:' 'MD5 check failed'
64afabb236ea02927914d03f258e620b  page06.pre
SHAR_EOF
  else
    shar_count="`LC_ALL= LC_CTYPE= LANG= wc -c < 'page06.pre'`"
    test 448 -eq "$shar_count" ||
    $echo 'page06.pre:' 'original size' '448,' 'current size' "$shar_count!"
  fi
fi
# ============= page02.pst ==============
if test -f 'page02.pst' && test "$first_param" != -c; then
  $echo 'x -' SKIPPING 'page02.pst' '(file already exists)'
else
  $echo 'x -' extracting 'page02.pst' '(text)'
  sed 's/^X//' << 'SHAR_EOF' > 'page02.pst' &&
<HR WIDTH="100%">
<P>
This is basically the same as the <i>DataBase</i> in the previous
tutorial but I've changed the name to be more generic.  The feeling is
that a <i>Data</i> object would be a C struct but an <i>Work</i>
object would be a class with methods.
<P>
Now that you know what we'll be putting into the queue, lets go to the
next page where I specialize the ACE_Message_Block.
<P>
SHAR_EOF
  $shar_touch -am 03191459100 'page02.pst' &&
  chmod 0664 'page02.pst' ||
  $echo 'restore of' 'page02.pst' 'failed'
  if ( md5sum --help 2>&1 | grep 'sage: md5sum \[' ) >/dev/null 2>&1 \
  && ( md5sum --version 2>&1 | grep -v 'textutils 1.12' ) >/dev/null; then
    md5sum -c << SHAR_EOF >/dev/null 2>&1 \
    || $echo 'page02.pst:' 'MD5 check failed'
ab34347fca8c20953552cf0ecebd394f  page02.pst
SHAR_EOF
  else
    shar_count="`LC_ALL= LC_CTYPE= LANG= wc -c < 'page02.pst'`"
    test 393 -eq "$shar_count" ||
    $echo 'page02.pst:' 'original size' '393,' 'current size' "$shar_count!"
  fi
fi
# ============= page03.pst ==============
if test -f 'page03.pst' && test "$first_param" != -c; then
  $echo 'x -' SKIPPING 'page03.pst' '(file already exists)'
else
  $echo 'x -' extracting 'page03.pst' '(text)'
  sed 's/^X//' << 'SHAR_EOF' > 'page03.pst' &&
<HR WIDTH="100%">
<P>
Ok, this looks pretty good.  We just construct our specialized
Message_Block instead of the generic ACE_Message_Block and let it
carry our data along.  When our application is done with the message
block and release()es it, we know that our work object will also be
taken care of.
<P>
Let's now go to main() and see what we had to change there to use this
specialization.
<P>
SHAR_EOF
  $shar_touch -am 03191459100 'page03.pst' &&
  chmod 0664 'page03.pst' ||
  $echo 'restore of' 'page03.pst' 'failed'
  if ( md5sum --help 2>&1 | grep 'sage: md5sum \[' ) >/dev/null 2>&1 \
  && ( md5sum --version 2>&1 | grep -v 'textutils 1.12' ) >/dev/null; then
    md5sum -c << SHAR_EOF >/dev/null 2>&1 \
    || $echo 'page03.pst:' 'MD5 check failed'
01e400b5683e0e1c3dfa25cc8120bfa6  page03.pst
SHAR_EOF
  else
    shar_count="`LC_ALL= LC_CTYPE= LANG= wc -c < 'page03.pst'`"
    test 398 -eq "$shar_count" ||
    $echo 'page03.pst:' 'original size' '398,' 'current size' "$shar_count!"
  fi
fi
# ============= page04.pst ==============
if test -f 'page04.pst' && test "$first_param" != -c; then
  $echo 'x -' SKIPPING 'page04.pst' '(file already exists)'
else
  $echo 'x -' extracting 'page04.pst' '(text)'
  sed 's/^X//' << 'SHAR_EOF' > 'page04.pst' &&
<HR WIDTH="100%">
<P>
That certainly looks cleaner than the previous approach!  If you
blink, you'll miss the part where the Work object goes into the Queue.
<P>
SHAR_EOF
  $shar_touch -am 03191459100 'page04.pst' &&
  chmod 0664 'page04.pst' ||
  $echo 'restore of' 'page04.pst' 'failed'
  if ( md5sum --help 2>&1 | grep 'sage: md5sum \[' ) >/dev/null 2>&1 \
  && ( md5sum --version 2>&1 | grep -v 'textutils 1.12' ) >/dev/null; then
    md5sum -c << SHAR_EOF >/dev/null 2>&1 \
    || $echo 'page04.pst:' 'MD5 check failed'
245db1d5e74203bf085369bb47d646db  page04.pst
SHAR_EOF
  else
    shar_count="`LC_ALL= LC_CTYPE= LANG= wc -c < 'page04.pst'`"
    test 162 -eq "$shar_count" ||
    $echo 'page04.pst:' 'original size' '162,' 'current size' "$shar_count!"
  fi
fi
# ============= page05.pst ==============
if test -f 'page05.pst' && test "$first_param" != -c; then
  $echo 'x -' SKIPPING 'page05.pst' '(file already exists)'
else
  $echo 'x -' extracting 'page05.pst' '(text)'
  sed 's/^X//' << 'SHAR_EOF' > 'page05.pst' &&
<HR WIDTH="100%">
<P>
Like main() this is actually simpler than the previous tutorial.  It's
much cleaner to carry around a pointer to the object we're working
with than to try copying data.
<P>
The only complication is the new ACE_Barrier.  It's a pretty simple
object that makes it easy for you to synch threads in this way.  You
could do some fancy tricks with mutexes, counters & semaphores but why
bother when the Barrier already exists.
<P>
SHAR_EOF
  $shar_touch -am 03191459100 'page05.pst' &&
  chmod 0664 'page05.pst' ||
  $echo 'restore of' 'page05.pst' 'failed'
  if ( md5sum --help 2>&1 | grep 'sage: md5sum \[' ) >/dev/null 2>&1 \
  && ( md5sum --version 2>&1 | grep -v 'textutils 1.12' ) >/dev/null; then
    md5sum -c << SHAR_EOF >/dev/null 2>&1 \
    || $echo 'page05.pst:' 'MD5 check failed'
a7f519237d11a25b28af7aa33f5aaf30  page05.pst
SHAR_EOF
  else
    shar_count="`LC_ALL= LC_CTYPE= LANG= wc -c < 'page05.pst'`"
    test 447 -eq "$shar_count" ||
    $echo 'page05.pst:' 'original size' '447,' 'current size' "$shar_count!"
  fi
fi
rm -fr _sh32620
exit 0