datetimeedit.cpp

Trolltech公司发布的图形界面操作系统。可在qt-embedded-2.3.7平台上编译为嵌入式图形界面操作系统。

/**********************************************************************
** Copyright (C) 2000-2002 Trolltech AS.  All rights reserved.
**
** This file is part of the Qtopia Environment.
**
** This file may be distributed and/or modified under the terms of the
** GNU General Public License version 2 as published by the Free Software
** Foundation and appearing in the file LICENSE.GPL included in the
** packaging of this file.
**
** This file is provided AS IS with NO WARRANTY OF ANY KIND, INCLUDING THE
** WARRANTY OF DESIGN, MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
**
** See http://www.trolltech.com/gpl/ for GPL licensing information.
**
** Contact [e-mail] if any conditions of this licensing are
** not clear to you.
**
**********************************************************************/

#include "datetimeedit.h"
#include <qvalidator.h>
#include <qapplication.h>
#include <qpopupmenu.h>

class TimeValidator : public QValidator
{
public:
    TimeValidator(QWidget *p, const char *n = 0) : QValidator(p,n)
    {
    }

    State validate(QString &input, int &cpos) const {
	QTime t;
	return evaluate(input, cpos, t);
    }

    State evaluate(QString &input, int &, QTime &result) const
    {
	// <00->23>:<00->59> [AM|PM]
	QString working = input.stripWhiteSpace();

	int i = 0;
	int st = 0; // hour, minute, second, end.
	int count = 0;
	int acc = 0;
	while (i < (int)working.length()) {
	    if (working[i].isSpace()) {
		i++;
		continue;
	    }
	    // expect digits,
	    if (working[i].isDigit()) {
		if (st > 2 || count > 1)
		    return Invalid;
		if (acc)
		    acc *= 10;
		acc += working[i].digitValue();
		count++;
		switch(st) {
		    case 0:
			if (acc > 23)
			    return Intermediate;
			result.setHMS(acc, 0, 0);
			break;
		    case 1:
			if (acc > 59)
			    return Intermediate;
			result.setHMS(result.hour(), acc, 0);
			break;
		    case 2:
			if (acc > 59)
			    return Intermediate;
			result.setHMS(result.hour(), result.minute(), acc);
			break;
		}
	    } else if (working[i] == QChar(':')) {
		if (st > 1 || count == 0)
		    return Intermediate;
		acc = 0;
		st++;
		count = 0;
	    } else if (working[i] == QChar('A')
		    || working[i] == QChar('a')
		    || working[i] == QChar('P')
		    || working[i] == QChar('p')) {
		if (st == 0 && count == 0)
		    return Intermediate;
		acc = 0;
		count = 0;
		st = 3;

		if (working[i] == QChar('p') || working[i] == QChar('P')) {
		    if (result.hour() == 12)
			result.setHMS(12, result.minute(), result.second());
		    else if (result.hour() > 11)
			return Intermediate;
		    else
			result.setHMS(result.hour() + 12, result.minute(), result.second());
		} else {
		    if (result.hour() == 12)
			result.setHMS(0, result.minute(), result.second());
		    else if (result.hour() > 11)
			return Intermediate;
		}
		if (i + 1 == (int)working.length())
		    return Valid;
		if (i + 2 != (int)working.length())
		    return  Intermediate;
		if (working[i+1] == QChar('m')
			|| working[i+1] == QChar('M'))
		    return Valid;
		else
		    return Invalid;
	    } else
		return Invalid;
	    i++;
	}
	return Valid;

    }
};


/*!
  \class QPETimeEdit datetimeedit.h
  \brief The QPETimeEdit class provides a compact widget for selecting a time.

  QPETimeEdit extends QSpinBox to validate times as they are entered.
  It handles 12 hour and 24 hour time formats.

  \ingroup qtopiaemb
*/

/*!
  \fn QPETimeEdit::valueChanged( const QTime &t );

  This signal is emitted when the time is changed.
*/

/*!
  Constructs a QPETimeEdit with the time set to 00:00.
*/
QPETimeEdit::QPETimeEdit( QWidget *parent, const char *name)
    : QSpinBox(parent, name)
{
    setWrapping(TRUE);

    setMinValue(0);
    setMaxValue(23*60 + 59);
    setLineStep(15);

    connect(this, SIGNAL(valueChanged(int)),
	    this, SLOT(changeTimeUsingValue(int)));

    tv = new TimeValidator(this);

    setValidator(tv);

    TimeString::connectChange(this,SLOT(clockChanged()) );
}

/*!
  Constructs a QPETimeEdit with the time set to \a dt.
*/
QPETimeEdit::QPETimeEdit( const QTime &dt, QWidget *parent,
	const char *name ) : QSpinBox(parent, name)
{
    setWrapping(TRUE);

    setMinValue(0);
    setMaxValue(23*60 + 59);
    setLineStep(15);

    setTime(dt);

    connect(this, SIGNAL(valueChanged(int)),
	    this, SLOT(changeTimeUsingValue(int)));

    tv = new TimeValidator(this);

    setValidator(tv);
}

/*!
  \internal
*/
void QPETimeEdit::clockChanged()
{
    updateDisplay();
}

/*!
  Destructs QPETimeEdit.
*/
QPETimeEdit::~QPETimeEdit()
{
}

/*!
  Reimplemented to validate the time entered.
*/
// minutes only;
QString QPETimeEdit::mapValueToText(int v)
{
    if (v >= 24*60)
	return QString::null;


    QTime t(v / 60, v % 60);
    return TimeString::localHM(t);
}

/*!
  Reimplemented to validate the time entered.
*/
int QPETimeEdit::mapTextToValue(bool *ok)
{
    QTime res;
    QString working = text();
    int cpos = 0;
    bool test = (tv->evaluate(working, cpos, res) == QValidator::Valid);

    if (ok)
	*ok = test;

    int h = res.hour();
    int m = res.minute();

    int v = h * 60 + m;

    return v;
}

/*!
  \internal
*/
QTime QPETimeEdit::mapValueToTime(int v) const
{
    QTime tm(v / 60, v % 60,0);
    return tm;
}

/*!
  \internal
*/
void QPETimeEdit::changeTimeUsingValue(int v)
{
    QTime tm = mapValueToTime(v);
    emit valueChanged(tm);
}

/*!
  Sets displayed time to \a tm.

  \sa time()
*/
void QPETimeEdit::setTime( const QTime &tm )
{
    if (tm == time())
	return;
    setValue(tm.hour() * 60 + tm.minute());
}

/*!
  Returns the time selected.

  \sa setTime()
*/
QTime QPETimeEdit::time( ) const
{
    QTime tm = mapValueToTime(value());
    return tm;
}

/*!
  Increases the time by 15 minutes.
*/
void QPETimeEdit::stepUp()
{
    int tmp = value();
    tmp = tmp - (tmp % 15);
    tmp += 15;
    if (tmp > maxValue()) {
	if (parent() && qstrcmp(parent()->className(), "QPEDateTimeEdit") == 0) {
	    QPEDateTimeEdit *dte = (QPEDateTimeEdit *)parent();
	    dte->blockSignals(TRUE);
	    dte->setDate(dte->date().addDays(1));
	    dte->blockSignals(FALSE);
	}
	tmp = 0;
    }
    setValue(tmp);
}

/*!
  Decreases the time by 15 minutes.
*/
void QPETimeEdit::stepDown()
{
    int tmp = value();
    if (tmp % 15)
	tmp = tmp - (tmp % 15);
    else
	tmp -=15;
    if (tmp < minValue()) {
	if (parent() && qstrcmp(parent()->className(), "QPEDateTimeEdit") == 0) {
	    QPEDateTimeEdit *dte = (QPEDateTimeEdit *)parent();
	    dte->blockSignals(TRUE);
	    dte->setDate(dte->date().addDays(-1));
	    dte->blockSignals(FALSE);
	}
	tmp = 23*60+45;
    }
    setValue(tmp);
}



/*=====================================*/

/*!
  \class QPEDateEdit datetimeedit.h
  \brief The QPEDateEdit class provides a compact widget for selecting
  a date.

  QPEDateEdit displays a QPushButton with the selected date displayed.
  When clicked, a QPEDatePicker is popped up and a new date can be
  selected.

  The button can display the date in either long or short format.

  It is also possible to allow no to date selected.

  \ingroup qtopiaemb
*/

/*!
  \fn QPEDateEdit::valueChanged( const QDate &t );

  This signal is emitted when the date is changed.
*/

/*!
  \fn bool QPEDateEdit::longFormat() const;

  Returns TRUE if dates are displayed in long format.

  \sa setLongFormat(), setDateFormat()
*/

/*!
  Constructs QPEDateEdit with the current date selected.

  If \a longDate is TRUE the push button will show the selected date in
  long format.

  If \a allowNullDate is TRUE it is possible to select no date.
*/
QPEDateEdit::QPEDateEdit( QWidget *parent, const char * name, bool longDate,
			      bool allowNullDate )
    :QPushButton( parent, name ), longFmt(longDate), mAllowNullButton(allowNullDate)
{
    df = TimeString::currentDateFormat();
    noneButton = 0;
    init();
    setLongFormat(longDate);
}


/*!
  Constructs QPEDateEdit with the date \a dt.

  If \a longDate is TRUE the push button will show the selected date in
  long format.

  If \a allowNullDate is TRUE it is possible to select no date.
*/
QPEDateEdit::QPEDateEdit( const QDate &dt, QWidget *parent, const char * name, bool longDate,
			      bool allowNullDate )
    :QPushButton( parent, name ), longFmt(longDate), mAllowNullButton(allowNullDate)
{
    currDate = dt;
    noneButton = 0;
    init();
    setLongFormat(longDate);
}

/*!
  \internal
*/
void QPEDateEdit::clockChanged()
{
    df = TimeString::currentDateFormat();
    updateButtonText();
}

/*!
  If \a l is TRUE, display the date in long format.

  \sa longFormat(), setDateFormat()
*/
void QPEDateEdit::setLongFormat( bool l )
{
    longFmt = l;
    updateButtonText();
}

void QPEDateEdit::init()
{
    QPopupMenu *popup = new QPopupMenu( this );
    monthView = new QPEDatePicker( popup );
    connect( monthView, SIGNAL(dateClicked(const QDate&)), popup, SLOT(close()) );

    // XXX WARNING DO NOT CHANGE THIS UNLESS....
    // you test VERY carefully.  There has been
    // three attempts to allow this to be changed after
    // init, and all of them resulted in a host of wierd bugs.
    // Resulting in having to roll back the change.
    // Watch espcially for:
    //    Focus bugs, whereby the keys don't do what they should
    //                Until TAB is pressed, or you can't get to the
    //                None Button.
    //    Layout bugs, Make sure the button actually hides/shows,
    //		      Both on the first show and later shows.
    //	  Key bugs.  All these should work,
    //		    Left,Right,Up,Down,Space.
    // XXX
    if (mAllowNullButton)  // set to 1 for show, 
	noneButton = new QPushButton(tr("None"), popup);
    // XXX WARNING See above.

    //
    // Geometry information for the QPEDatePicker widget is
    // setup by the QPopupMenu (parent).  However at 176x220,
    // the widget hangs off the side of the screen.  Force the
    // widget to be bounded by the desktop width.
    //
    monthView->setMaximumWidth(qApp->desktop()->width());

    popup->insertItem( monthView );

    if (mAllowNullButton) {
	popup->insertItem( noneButton );
	connect(noneButton, SIGNAL( clicked() ), this, SLOT(setNull()));
    }

    connect( monthView, SIGNAL( dateClicked( const QDate &) ),
	    this, SLOT( setDate( const QDate &) ) );
    connect( monthView, SIGNAL( dateClicked( const QDate &) ),
	    this, SIGNAL( valueChanged( const QDate &) ) );
    TimeString::connectChange(this,SLOT(clockChanged()));
    setPopup( popup );
    popup->setFocusPolicy(NoFocus);
    setDate( QDate::currentDate() );
    setSizePolicy( QSizePolicy(QSizePolicy::MinimumExpanding, QSizePolicy::Fixed) );
}

/*!
  Returns TRUE if it is possible to select a null date.
*/
bool QPEDateEdit::allowNullDate() const
{
    return mAllowNullButton;
}

/*!
  Display the calendar with weeks starting on Monday if \a startMonday is
  TRUE, otherwise weeks start with Sunday.
*/
void QPEDateEdit::setWeekStartsMonday( bool startMonday )
{
    weekStartsMonday = startMonday;
    monthView->setWeekStartsMonday( weekStartsMonday );
}

void QPEDateEdit::setNull()
{
    popup()->close();
    setDate( QDate() );
    emit valueChanged( QDate() );
}

void QPEDateEdit::updateButtonText()
{
    if ( currDate.isValid() ) {
#if defined(_WS_QWS_)
	setText( longFmt ? TimeString::longDateString(currDate,df) : TimeString::dateString(currDate,df) );
#else
	//setText( longFmt ? currDate.toString( "ddd MMMM d yy" ) : currDate.toString("dd/MM/yyyy"));
	setText( longFmt ? currDate.toString( "ddd MMMM d yy" ) : currDate.toString(Qt::LocalDate));
#endif
	monthView->setDate( currDate.year(), currDate.month(), currDate.day() );
    }
    else {
	setText( tr("None") );
    }
}

/*!
  Return the currently selected date.
*/
QDate QPEDateEdit::date() const
{
    return currDate;
}

/*!
  Set the current date to \a d.
*/
void QPEDateEdit::setDate( const QDate &d )
{
    if ( d != currDate ) {
	currDate = d;
	updateButtonText();
    }
}

/*!
  Set the long date format to \a format.

  \sa setLongFormat()
*/
void QPEDateEdit::setDateFormat( DateFormat format )
{
    df = format;
    updateButtonText();
}

/*=====================================*/

/*!
  \class QPEDateTimeEdit datetimeedit.h
  \brief The QPEDateTimeEdit class provides a compact widget for selecting
  a date and time.

  QPEDateTimeEdit displays a QPEDateEdit and QPETimeEdit side-by-side.

  \ingroup qtopiaemb
*/

/*!
  \fn QPEDateTimeEdit::valueChanged( const QDateTime &t );

  This signal is emitted when the date or time is changed.
*/

/*!
  Constructs a QPEDateTimeEdit with the date set to today and the time
  set to 00:00.
*/

QPEDateTimeEdit::QPEDateTimeEdit( QWidget *parent, const char *name)
    : QHBox(parent, name)
{
    de = new QPEDateEdit(this, "date"); // No tr
    te = new QPETimeEdit(this, "time"); // No tr
    connect(de, SIGNAL(valueChanged(const QDate &)),
	    this, SLOT(setDate( const QDate &)));
    connect(te, SIGNAL(valueChanged(const QTime &)),
	    this, SLOT(setTime( const QTime &)));
}

/*!
  Constructs QPEDateTimeEdit with the date and time \a dt.
*/
QPEDateTimeEdit::QPEDateTimeEdit( const QDateTime &dt, QWidget *parent,
	const char *name ) : QHBox(parent, name)
{
    de = new QPEDateEdit(dt.date(), this, "date"); // No tr
    te = new QPETimeEdit(dt.time(), this, "time"); // No tr
    connect(de, SIGNAL(valueChanged(const QDate &)),
	    this, SLOT(setDate( const QDate &)));
    connect(te, SIGNAL(valueChanged(const QTime &)),
	    this, SLOT(setTime( const QTime &)));
}

/*!
  Destructs QPEDateTimeEdit.
*/
QPEDateTimeEdit::~QPEDateTimeEdit() {}

/*!
  Sets the current date to \a dt.

  \sa setDateTime()
*/
void QPEDateTimeEdit::setDate( const QDate &dt )
{
    de->setDate(dt);
    emit valueChanged(dateTime());
}

/*!
  Sets the current time to \a dt.

  \sa setDateTime()
*/
void QPEDateTimeEdit::setTime( const QTime &dt )
{
    te->setTime(dt);
    emit valueChanged(dateTime());
}

/*!
  Sets the current date and time to \a dt.

  \sa setDate(), setTime()
*/
void QPEDateTimeEdit::setDateTime( const QDateTime &dt )
{
    de->setDate(dt.date());
    te->setTime(dt.time());
    emit valueChanged(dateTime());
}

/*!
  Returns the currently selected date.
*/
QDate QPEDateTimeEdit::date() const
{
    return de->date();
}

/*!
  Returns the currently selected time.
*/
QTime QPEDateTimeEdit::time() const
{
    return te->time();
}

/*!
  Returns the currently selected date and time.
*/
QDateTime QPEDateTimeEdit::dateTime() const
{
    return QDateTime(de->date(), te->time());
}

/*!
  Enables changing the date if \a b is TRUE, otherwise disables
  input.

  \sa dateIsEnabled(), setTimeEnabled()
*/
void QPEDateTimeEdit::setDateEnabled(bool b)
{
    de->setEnabled(b);
}

/*!
  Enables changing the time if \a b is TRUE, otherwise disables
  input.

  \sa timeIsEnabled(), setDateEnabled()
*/
void QPEDateTimeEdit::setTimeEnabled(bool b)
{
    te->setEnabled(b);
}

/*!
  Returns TRUE if changing the date is enabled, otherwise FALSE.

  \sa setDateEnabled()
*/
bool QPEDateTimeEdit::dateIsEnabled() const
{
    return de->isEnabled();
}


/*!
  Returns TRUE if changing the time is enabled, otherwise FALSE.

  \sa setTimeEnabled()
*/
bool QPEDateTimeEdit::timeIsEnabled() const
{
    return te->isEnabled();
}