📄 wdm.h
字号:
#define FILE_DEVICE_CONTROLLER 0x00000004
#define FILE_DEVICE_DATALINK 0x00000005
#define FILE_DEVICE_DFS 0x00000006
#define FILE_DEVICE_DISK 0x00000007
#define FILE_DEVICE_DISK_FILE_SYSTEM 0x00000008
#define FILE_DEVICE_FILE_SYSTEM 0x00000009
#define FILE_DEVICE_INPORT_PORT 0x0000000a
#define FILE_DEVICE_KEYBOARD 0x0000000b
#define FILE_DEVICE_MAILSLOT 0x0000000c
#define FILE_DEVICE_MIDI_IN 0x0000000d
#define FILE_DEVICE_MIDI_OUT 0x0000000e
#define FILE_DEVICE_MOUSE 0x0000000f
#define FILE_DEVICE_MULTI_UNC_PROVIDER 0x00000010
#define FILE_DEVICE_NAMED_PIPE 0x00000011
#define FILE_DEVICE_NETWORK 0x00000012
#define FILE_DEVICE_NETWORK_BROWSER 0x00000013
#define FILE_DEVICE_NETWORK_FILE_SYSTEM 0x00000014
#define FILE_DEVICE_NULL 0x00000015
#define FILE_DEVICE_PARALLEL_PORT 0x00000016
#define FILE_DEVICE_PHYSICAL_NETCARD 0x00000017
#define FILE_DEVICE_PRINTER 0x00000018
#define FILE_DEVICE_SCANNER 0x00000019
#define FILE_DEVICE_SERIAL_MOUSE_PORT 0x0000001a
#define FILE_DEVICE_SERIAL_PORT 0x0000001b
#define FILE_DEVICE_SCREEN 0x0000001c
#define FILE_DEVICE_SOUND 0x0000001d
#define FILE_DEVICE_STREAMS 0x0000001e
#define FILE_DEVICE_TAPE 0x0000001f
#define FILE_DEVICE_TAPE_FILE_SYSTEM 0x00000020
#define FILE_DEVICE_TRANSPORT 0x00000021
#define FILE_DEVICE_UNKNOWN 0x00000022
#define FILE_DEVICE_VIDEO 0x00000023
#define FILE_DEVICE_VIRTUAL_DISK 0x00000024
#define FILE_DEVICE_WAVE_IN 0x00000025
#define FILE_DEVICE_WAVE_OUT 0x00000026
#define FILE_DEVICE_8042_PORT 0x00000027
#define FILE_DEVICE_NETWORK_REDIRECTOR 0x00000028
#define FILE_DEVICE_BATTERY 0x00000029
#define FILE_DEVICE_BUS_EXTENDER 0x0000002a
#define FILE_DEVICE_MODEM 0x0000002b
#define FILE_DEVICE_VDM 0x0000002c
#define FILE_DEVICE_MASS_STORAGE 0x0000002d
#define FILE_DEVICE_SMB 0x0000002e
#define FILE_DEVICE_KS 0x0000002f
#define FILE_DEVICE_CHANGER 0x00000030
#define FILE_DEVICE_SMARTCARD 0x00000031
#define FILE_DEVICE_ACPI 0x00000032
#define FILE_DEVICE_DVD 0x00000033
#define FILE_DEVICE_FULLSCREEN_VIDEO 0x00000034
#define FILE_DEVICE_DFS_FILE_SYSTEM 0x00000035
#define FILE_DEVICE_DFS_VOLUME 0x00000036
#define FILE_DEVICE_SERENUM 0x00000037
//
// Macro definition for defining IOCTL and FSCTL function control codes. Note
// that function codes 0-2047 are reserved for Microsoft Corporation, and
// 2048-4095 are reserved for customers.
//
#define CTL_CODE( DeviceType, Function, Method, Access ) ( \
((DeviceType) << 16) | ((Access) << 14) | ((Function) << 2) | (Method) \
)
//
// Define the method codes for how buffers are passed for I/O and FS controls
//
#define METHOD_BUFFERED 0
#define METHOD_IN_DIRECT 1
#define METHOD_OUT_DIRECT 2
#define METHOD_NEITHER 3
//
// Define the access check value for any access
//
//
// The FILE_READ_ACCESS and FILE_WRITE_ACCESS constants are also defined in
// ntioapi.h as FILE_READ_DATA and FILE_WRITE_DATA. The values for these
// constants *MUST* always be in sync.
//
#define FILE_ANY_ACCESS 0
#define FILE_READ_ACCESS ( 0x0001 ) // file & pipe
#define FILE_WRITE_ACCESS ( 0x0002 ) // file & pipe
//
// Define access rights to files and directories
//
//
// The FILE_READ_DATA and FILE_WRITE_DATA constants are also defined in
// devioctl.h as FILE_READ_ACCESS and FILE_WRITE_ACCESS. The values for these
// constants *MUST* always be in sync.
// The values are redefined in devioctl.h because they must be available to
// both DOS and NT.
//
#define FILE_READ_DATA ( 0x0001 ) // file & pipe
#define FILE_LIST_DIRECTORY ( 0x0001 ) // directory
#define FILE_WRITE_DATA ( 0x0002 ) // file & pipe
#define FILE_ADD_FILE ( 0x0002 ) // directory
#define FILE_APPEND_DATA ( 0x0004 ) // file
#define FILE_ADD_SUBDIRECTORY ( 0x0004 ) // directory
#define FILE_READ_EA ( 0x0008 ) // file & directory
#define FILE_WRITE_EA ( 0x0010 ) // file & directory
#define FILE_EXECUTE ( 0x0020 ) // file
#define FILE_TRAVERSE ( 0x0020 ) // directory
#define FILE_DELETE_CHILD ( 0x0040 ) // directory
#define FILE_READ_ATTRIBUTES ( 0x0080 ) // all
#define FILE_WRITE_ATTRIBUTES ( 0x0100 ) // all
#define FILE_CREATE_PIPE_INSTANCE ( 0x0200 ) // named pipe
#define FILE_ALL_ACCESS (STANDARD_RIGHTS_REQUIRED | SYNCHRONIZE | 0x3FF)
#define FILE_GENERIC_READ (STANDARD_RIGHTS_READ |\
FILE_READ_DATA |\
FILE_READ_ATTRIBUTES |\
FILE_READ_EA |\
SYNCHRONIZE)
#define FILE_GENERIC_WRITE (STANDARD_RIGHTS_WRITE |\
FILE_WRITE_DATA |\
FILE_WRITE_ATTRIBUTES |\
FILE_WRITE_EA |\
FILE_APPEND_DATA |\
SYNCHRONIZE)
#define FILE_GENERIC_EXECUTE (STANDARD_RIGHTS_EXECUTE |\
FILE_READ_ATTRIBUTES |\
FILE_EXECUTE |\
SYNCHRONIZE)
//
// Define share access rights to files and directories
//
#define FILE_SHARE_READ 0x00000001
#define FILE_SHARE_WRITE 0x00000002
#define FILE_SHARE_DELETE 0x00000004
#define FILE_SHARE_VALID_FLAGS 0x00000007
//
// Define the file attributes values
//
// Note: 0x00000008 is reserved for use for the old DOS VOLID (volume ID)
// and is therefore not considered valid in NT.
//
// Note: 0x00000010 is reserved for use for the old DOS SUBDIRECTORY flag
// and is therefore not considered valid in NT. This flag has
// been disassociated with file attributes since the other flags are
// protected with READ_ and WRITE_ATTRIBUTES access to the file.
//
// Note: Note also that the order of these flags is set to allow both the
// FAT and the Pinball File Systems to directly set the attributes
// flags in attributes words without having to pick each flag out
// individually. The order of these flags should not be changed!
//
#define FILE_ATTRIBUTE_READONLY 0x00000001
#define FILE_ATTRIBUTE_HIDDEN 0x00000002
#define FILE_ATTRIBUTE_SYSTEM 0x00000004
//OLD DOS VOLID 0x00000008
#define FILE_ATTRIBUTE_DIRECTORY 0x00000010
#define FILE_ATTRIBUTE_ARCHIVE 0x00000020
#define FILE_ATTRIBUTE_ENCRYPTED 0x00000040
#define FILE_ATTRIBUTE_NORMAL 0x00000080
#define FILE_ATTRIBUTE_TEMPORARY 0x00000100
#define FILE_ATTRIBUTE_SPARSE_FILE 0x00000200
#define FILE_ATTRIBUTE_REPARSE_POINT 0x00000400
#define FILE_ATTRIBUTE_COMPRESSED 0x00000800
#define FILE_ATTRIBUTE_OFFLINE 0x00001000
#define FILE_ATTRIBUTE_CONTENT_INDEXED 0x00002000
#define FILE_ATTRIBUTE_VALID_FLAGS 0x00003ff7
#define FILE_ATTRIBUTE_VALID_SET_FLAGS 0x000031a7
//
// Define the create disposition values
//
#define FILE_SUPERSEDE 0x00000000
#define FILE_OPEN 0x00000001
#define FILE_CREATE 0x00000002
#define FILE_OPEN_IF 0x00000003
#define FILE_OVERWRITE 0x00000004
#define FILE_OVERWRITE_IF 0x00000005
#define FILE_MAXIMUM_DISPOSITION 0x00000005
//
// Define the create/open option flags
//
#define FILE_DIRECTORY_FILE 0x00000001
#define FILE_WRITE_THROUGH 0x00000002
#define FILE_SEQUENTIAL_ONLY 0x00000004
#define FILE_NO_INTERMEDIATE_BUFFERING 0x00000008
#define FILE_SYNCHRONOUS_IO_ALERT 0x00000010
#define FILE_SYNCHRONOUS_IO_NONALERT 0x00000020
#define FILE_NON_DIRECTORY_FILE 0x00000040
#define FILE_CREATE_TREE_CONNECTION 0x00000080
#define FILE_COMPLETE_IF_OPLOCKED 0x00000100
#define FILE_NO_EA_KNOWLEDGE 0x00000200
#define FILE_OPEN_FOR_RECOVERY 0x00000400
#define FILE_RANDOM_ACCESS 0x00000800
#define FILE_DELETE_ON_CLOSE 0x00001000
#define FILE_OPEN_BY_FILE_ID 0x00002000
#define FILE_OPEN_FOR_BACKUP_INTENT 0x00004000
#define FILE_NO_COMPRESSION 0x00008000
#define FILE_RESERVE_OPFILTER 0x00100000
#define FILE_OPEN_REPARSE_POINT 0x00200000
#define FILE_OPEN_NO_RECALL 0x00400000
#define FILE_OPEN_FOR_FREE_SPACE_QUERY 0x00800000
#define FILE_COPY_STRUCTURED_STORAGE 0x00000041
#define FILE_STRUCTURED_STORAGE 0x00000441
#define FILE_VALID_OPTION_FLAGS 0x00ffffff
#define FILE_VALID_PIPE_OPTION_FLAGS 0x00000032
#define FILE_VALID_MAILSLOT_OPTION_FLAGS 0x00000032
#define FILE_VALID_SET_FLAGS 0x00000036
//
// Define the I/O status information return values for NtCreateFile/NtOpenFile
//
#define FILE_SUPERSEDED 0x00000000
#define FILE_OPENED 0x00000001
#define FILE_CREATED 0x00000002
#define FILE_OVERWRITTEN 0x00000003
#define FILE_EXISTS 0x00000004
#define FILE_DOES_NOT_EXIST 0x00000005
//
// Define special ByteOffset parameters for read and write operations
//
#define FILE_WRITE_TO_END_OF_FILE 0xffffffff
#define FILE_USE_FILE_POINTER_POSITION 0xfffffffe
//
// Define alignment requirement values
//
#define FILE_BYTE_ALIGNMENT 0x00000000
#define FILE_WORD_ALIGNMENT 0x00000001
#define FILE_LONG_ALIGNMENT 0x00000003
#define FILE_QUAD_ALIGNMENT 0x00000007
#define FILE_OCTA_ALIGNMENT 0x0000000f
#define FILE_32_BYTE_ALIGNMENT 0x0000001f
#define FILE_64_BYTE_ALIGNMENT 0x0000003f
#define FILE_128_BYTE_ALIGNMENT 0x0000007f
#define FILE_256_BYTE_ALIGNMENT 0x000000ff
#define FILE_512_BYTE_ALIGNMENT 0x000001ff
//
// Define the maximum length of a filename string
//
#define MAXIMUM_FILENAME_LENGTH 256
//
// Define the various device characteristics flags
//
#define FILE_REMOVABLE_MEDIA 0x00000001
#define FILE_READ_ONLY_DEVICE 0x00000002
#define FILE_FLOPPY_DISKETTE 0x00000004
#define FILE_WRITE_ONCE_MEDIA 0x00000008
#define FILE_REMOTE_DEVICE 0x00000010
#define FILE_DEVICE_IS_MOUNTED 0x00000020
#define FILE_VIRTUAL_VOLUME 0x00000040
#define FILE_AUTOGENERATED_DEVICE_NAME 0x00000080
//
// Define the base asynchronous I/O argument types
//
typedef struct _IO_STATUS_BLOCK {
NTSTATUS Status;
ULONG Information;
} IO_STATUS_BLOCK, *PIO_STATUS_BLOCK;
//
// Define an Asynchronous Procedure Call from I/O viewpoint
//
typedef
VOID
(NTAPI *PIO_APC_ROUTINE) (
IN PVOID ApcContext,
IN PIO_STATUS_BLOCK IoStatusBlock,
IN ULONG Reserved
);
#define PIO_APC_ROUTINE_DEFINED
//
// Define the file information class values
//
// WARNING: The order of the following values are assumed by the I/O system.
// Any changes made here should be reflected there as well.
//
typedef enum _FILE_INFORMATION_CLASS {
FileBasicInformation = 4,
FileStandardInformation = 5,
FilePositionInformation = 14,
FileEndOfFileInformation = 20,
} FILE_INFORMATION_CLASS, *PFILE_INFORMATION_CLASS;
//
// Define the various structures which are returned on query operations
//
typedef struct _FILE_BASIC_INFORMATION {
LARGE_INTEGER CreationTime;
LARGE_INTEGER LastAccessTime;
LARGE_INTEGER LastWriteTime;
LARGE_INTEGER ChangeTime;
ULONG FileAttributes;
} FILE_BASIC_INFORMATION, *PFILE_BASIC_INFORMATION;
typedef struct _FILE_STANDARD_INFORMATION {
LARGE_INTEGER AllocationSize;
LARGE_INTEGER EndOfFile;
ULONG NumberOfLinks;
BOOLEAN DeletePending;
BOOLEAN Directory;
} FILE_STANDARD_INFORMATION, *PFILE_STANDARD_INFORMATION;
typedef struct _FILE_POSITION_INFORMATION {
LARGE_INTEGER CurrentByteOffset;
} FILE_POSITION_INFORMATION, *PFILE_POSITION_INFORMATION;
typedef struct _FILE_NETWORK_OPEN_INFORMATION {
LARGE_INTEGER CreationTime;
LARGE_INTEGER LastAccessTime;
LARGE_INTEGER LastWriteTime;
LARGE_INTEGER ChangeTime;
LARGE_INTEGER AllocationSize;
LARGE_INTEGER EndOfFile;
ULONG FileAttributes;
} FILE_NETWORK_OPEN_INFORMATION, *PFILE_NETWORK_OPEN_INFORMATION;
typedef struct _FILE_FULL_EA_INFORMATION {
ULONG NextEntryOffset;
UCHAR Flags;
UCHAR EaNameLength;
USHORT EaValueLength;
CHAR EaName[1];
} FILE_FULL_EA_INFORMATION, *PFILE_FULL_EA_INFORMATION;
//
// Define the file system information class values
//
// WARNING: The order of the following values are assumed by the I/O system.
// Any changes made here should be reflected there as well.
typedef enum _FSINFOCLASS {
FileFsVolumeInformation = 1,
FileFsLabelInformation, // 2
FileFsSizeInformation, // 3
FileFsDeviceInformation, // 4
FileFsAttributeInformation, // 5
FileFsControlInformation, // 6
FileFsFullSizeInformation, // 7
FileFsObjectIdInformation, // 8
FileFsMaximumInformation
} FS_INFORMATION_CLASS, *PFS_INFORMATION_CLASS;
typedef struct _FILE_FS_DEVICE_INFORMATION {
DEVICE_TYPE DeviceType;
ULONG Characteristics;
} FILE_FS_DEVICE_INFORMATION, *PFILE_FS_DEVICE_INFORMATION;
//
// Define the I/O bus interface types.
//
typedef enum _INTERFACE_TYPE {
InterfaceTypeUndefined = -1,
Internal,
Isa,
Eisa,
MicroChannel,
TurboChannel,
PCIBus,
VMEBus,
NuBus,
PCMCIABus,
CBus,
MPIBus,
MPSABus,
ProcessorInternal,
InternalPowerBus,
PNPISABus,
PNPBus,
MaximumInterfaceType
}INTERFACE_TYPE, *PINTERFACE_TYPE;
//
// Define the DMA transfer widths.
//
typedef enum _DMA_WIDTH {
Width8Bits,
Width16Bits,
Width32Bits,
MaximumDmaWidth
}DMA_WIDTH, *PDMA_WIDTH;
//
// Define DMA transfer speeds.
//
typedef enum _DMA_SPEED {
Compatible,
TypeA,
TypeB,
TypeC,
MaximumDmaSpeed
}DMA_SPEED, *PDMA_SPEED;
//
// Define I/O Driver error log packet structure. This structure is filled in
// by the driver.
//
typedef struct _IO_ERROR_LOG_PACKET {
UCHAR MajorFunctionCode;
UCHAR RetryCount;
USHORT DumpDataSize;
USHORT NumberOfStrings;
USHORT StringOffset;
USHORT EventCategory;
NTSTATUS ErrorCode;
ULONG UniqueErrorValue;
NTSTATUS FinalStatus;
ULONG SequenceNumber;
ULONG IoControlCode;
LARGE_INTEGER DeviceOffset;
ULONG DumpData[1];
}IO_ERROR_LOG_PACKET, *PIO_ERROR_LOG_PACKET;
//
// Define the I/O error log message. This message is sent by the error log
// thread over the lpc port.
//
typedef struct _IO_ERROR_LOG_MESSAGE {
USHORT Type;
USHORT Size;
USHORT DriverNameLength;
LARGE_INTEGER TimeStamp;
ULONG DriverNameOffset;
IO_ERROR_LOG_PACKET EntryData;
}IO_ERROR_LOG_MESSAGE, *PIO_ERROR_LOG_MESSAGE;
//
// Define the maximum message size that will be sent over the LPC to the
// application reading the error log entries.
//
#define IO_ERROR_LOG_MESSAGE_LENGTH PORT_MAXIMUM_MESSAGE_LENGTH
//
// Define the maximum packet size a driver can allocate.
//
#define ERROR_LOG_MAXIMUM_SIZE (IO_ERROR_LOG_MESSAGE_LENGTH + sizeof(IO_ERROR_LOG_PACKET) - \
sizeof(IO_ERROR_LOG_MESSAGE) - (sizeof(WCHAR) * 40))
#define PORT_MAXIMUM_MESSAGE_LENGTH 256
//
// Registry Specific Access Rights.
//
#define KEY_QUERY_VALUE (0x0001)
#define KEY_SET_VALUE (0x0002)
#define KEY_CREATE_SUB_KEY (0x00⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -