ntstatus.h

USB1.1控制器pdusbd12 ddk 驱动源码

#define STATUS_UNABLE_TO_DECOMMIT_VM     ((NTSTATUS)0xC000002CL)

//
// MessageId: STATUS_NOT_COMMITTED
//
// MessageText:
//
//  An attempt was made to change the attributes on memory that
//  has not been committed.
//
#define STATUS_NOT_COMMITTED             ((NTSTATUS)0xC000002DL)

//
// MessageId: STATUS_INVALID_PORT_ATTRIBUTES
//
// MessageText:
//
//  Invalid Object Attributes specified to NtCreatePort or invalid
//  Port Attributes specified to NtConnectPort
//
#define STATUS_INVALID_PORT_ATTRIBUTES   ((NTSTATUS)0xC000002EL)

//
// MessageId: STATUS_PORT_MESSAGE_TOO_LONG
//
// MessageText:
//
//  Length of message passed to NtRequestPort or NtRequestWaitReplyPort
//  was longer than the maximum message allowed by the port.
//
#define STATUS_PORT_MESSAGE_TOO_LONG     ((NTSTATUS)0xC000002FL)

//
// MessageId: STATUS_INVALID_PARAMETER_MIX
//
// MessageText:
//
//  An invalid combination of parameters was specified.
//
#define STATUS_INVALID_PARAMETER_MIX     ((NTSTATUS)0xC0000030L)

//
// MessageId: STATUS_INVALID_QUOTA_LOWER
//
// MessageText:
//
//  An attempt was made to lower a quota limit below the current usage.
//
#define STATUS_INVALID_QUOTA_LOWER       ((NTSTATUS)0xC0000031L)

//
// MessageId: STATUS_DISK_CORRUPT_ERROR
//
// MessageText:
//
//  {Corrupt Disk}
//  The file system structure on the disk is corrupt and unusable.
//  Please run the Chkdsk utility on the volume %s.
//
#define STATUS_DISK_CORRUPT_ERROR        ((NTSTATUS)0xC0000032L)

//
// MessageId: STATUS_OBJECT_NAME_INVALID
//
// MessageText:
//
//  Object Name invalid.
//
#define STATUS_OBJECT_NAME_INVALID       ((NTSTATUS)0xC0000033L)

//
// MessageId: STATUS_OBJECT_NAME_NOT_FOUND
//
// MessageText:
//
//  Object Name not found.
//
#define STATUS_OBJECT_NAME_NOT_FOUND     ((NTSTATUS)0xC0000034L)

//
// MessageId: STATUS_OBJECT_NAME_COLLISION
//
// MessageText:
//
//  Object Name already exists.
//
#define STATUS_OBJECT_NAME_COLLISION     ((NTSTATUS)0xC0000035L)

//
// MessageId: STATUS_PORT_DISCONNECTED
//
// MessageText:
//
//  Attempt to send a message to a disconnected communication port.
//
#define STATUS_PORT_DISCONNECTED         ((NTSTATUS)0xC0000037L)

//
// MessageId: STATUS_DEVICE_ALREADY_ATTACHED
//
// MessageText:
//
//  An attempt was made to attach to a device that was already attached to
//  another device.
//
#define STATUS_DEVICE_ALREADY_ATTACHED   ((NTSTATUS)0xC0000038L)

//
// MessageId: STATUS_OBJECT_PATH_INVALID
//
// MessageText:
//
//  Object Path Component was not a directory object.
//
#define STATUS_OBJECT_PATH_INVALID       ((NTSTATUS)0xC0000039L)

//
// MessageId: STATUS_OBJECT_PATH_NOT_FOUND
//
// MessageText:
//
//  {Path Not Found}
//  The path %s does not exist.
//
#define STATUS_OBJECT_PATH_NOT_FOUND     ((NTSTATUS)0xC000003AL)

//
// MessageId: STATUS_OBJECT_PATH_SYNTAX_BAD
//
// MessageText:
//
//  Object Path Component was not a directory object.
//
#define STATUS_OBJECT_PATH_SYNTAX_BAD    ((NTSTATUS)0xC000003BL)

//
// MessageId: STATUS_DATA_OVERRUN
//
// MessageText:
//
//  {Data Overrun}
//  A data overrun error occurred.
//
#define STATUS_DATA_OVERRUN              ((NTSTATUS)0xC000003CL)

//
// MessageId: STATUS_DATA_LATE_ERROR
//
// MessageText:
//
//  {Data Late}
//  A data late error occurred.
//
#define STATUS_DATA_LATE_ERROR           ((NTSTATUS)0xC000003DL)

//
// MessageId: STATUS_DATA_ERROR
//
// MessageText:
//
//  {Data Error}
//  An error in reading or writing data occurred.
//
#define STATUS_DATA_ERROR                ((NTSTATUS)0xC000003EL)

//
// MessageId: STATUS_CRC_ERROR
//
// MessageText:
//
//  {Bad CRC}
//  A cyclic redundancy check (CRC) checksum error occurred.
//
#define STATUS_CRC_ERROR                 ((NTSTATUS)0xC000003FL)

//
// MessageId: STATUS_SECTION_TOO_BIG
//
// MessageText:
//
//  {Section Too Large}
//  The specified section is too big to map the file.
//
#define STATUS_SECTION_TOO_BIG           ((NTSTATUS)0xC0000040L)

//
// MessageId: STATUS_PORT_CONNECTION_REFUSED
//
// MessageText:
//
//  The NtConnectPort request is refused.
//
#define STATUS_PORT_CONNECTION_REFUSED   ((NTSTATUS)0xC0000041L)

//
// MessageId: STATUS_INVALID_PORT_HANDLE
//
// MessageText:
//
//  The type of port handle is invalid for the operation requested.
//
#define STATUS_INVALID_PORT_HANDLE       ((NTSTATUS)0xC0000042L)

//
// MessageId: STATUS_SHARING_VIOLATION
//
// MessageText:
//
//  A file cannot be opened because the share access flags are
//  incompatible.
//
#define STATUS_SHARING_VIOLATION         ((NTSTATUS)0xC0000043L)

//
// MessageId: STATUS_QUOTA_EXCEEDED
//
// MessageText:
//
//  Insufficient quota exists to complete the operation
//
#define STATUS_QUOTA_EXCEEDED            ((NTSTATUS)0xC0000044L)

//
// MessageId: STATUS_INVALID_PAGE_PROTECTION
//
// MessageText:
//
//  The specified page protection was not valid.
//
#define STATUS_INVALID_PAGE_PROTECTION   ((NTSTATUS)0xC0000045L)

//
// MessageId: STATUS_MUTANT_NOT_OWNED
//
// MessageText:
//
//  An attempt to release a mutant object was made by a thread that was not the
//  owner of the mutant object.
//
#define STATUS_MUTANT_NOT_OWNED          ((NTSTATUS)0xC0000046L)

//
// MessageId: STATUS_SEMAPHORE_LIMIT_EXCEEDED
//
// MessageText:
//
//  An attempt was made to release a semaphore such that its maximum count
//  would have been exceeded.
//
#define STATUS_SEMAPHORE_LIMIT_EXCEEDED  ((NTSTATUS)0xC0000047L)

//
// MessageId: STATUS_PORT_ALREADY_SET
//
// MessageText:
//
//  An attempt to set a processes DebugPort or ExceptionPort was made,
//  but a port already exists in the process.
//
#define STATUS_PORT_ALREADY_SET          ((NTSTATUS)0xC0000048L)

//
// MessageId: STATUS_SECTION_NOT_IMAGE
//
// MessageText:
//
//  An attempt was made to query image information on a section
//  which does not map an image.
//
#define STATUS_SECTION_NOT_IMAGE         ((NTSTATUS)0xC0000049L)

//
// MessageId: STATUS_SUSPEND_COUNT_EXCEEDED
//
// MessageText:
//
//  An attempt was made to suspend a thread whose suspend count
//  was at its maximum.
//
#define STATUS_SUSPEND_COUNT_EXCEEDED    ((NTSTATUS)0xC000004AL)

//
// MessageId: STATUS_THREAD_IS_TERMINATING
//
// MessageText:
//
//  An attempt was made to suspend a thread that has begun
//  termination.
//
#define STATUS_THREAD_IS_TERMINATING     ((NTSTATUS)0xC000004BL)

//
// MessageId: STATUS_BAD_WORKING_SET_LIMIT
//
// MessageText:
//
//  An attempt was made to set the working set limit to an
//  invalid value (minimum greater than maximum, etc).
//
#define STATUS_BAD_WORKING_SET_LIMIT     ((NTSTATUS)0xC000004CL)

//
// MessageId: STATUS_INCOMPATIBLE_FILE_MAP
//
// MessageText:
//
//  A section was created to map a file which is not compatible
//  to an already existing section which maps the same file.
//
#define STATUS_INCOMPATIBLE_FILE_MAP     ((NTSTATUS)0xC000004DL)

//
// MessageId: STATUS_SECTION_PROTECTION
//
// MessageText:
//
//  A view to a section specifies a protection which is incompatible
//  with the initial view's protection.
//
#define STATUS_SECTION_PROTECTION        ((NTSTATUS)0xC000004EL)

//
// MessageId: STATUS_EAS_NOT_SUPPORTED
//
// MessageText:
//
//  An operation involving EAs failed because the file system does not
//  support EAs.
//
#define STATUS_EAS_NOT_SUPPORTED         ((NTSTATUS)0xC000004FL)

//
// MessageId: STATUS_EA_TOO_LARGE
//
// MessageText:
//
//  An EA operation failed because EA set is too large.
//
#define STATUS_EA_TOO_LARGE              ((NTSTATUS)0xC0000050L)

//
// MessageId: STATUS_NONEXISTENT_EA_ENTRY
//
// MessageText:
//
//  An EA operation failed because the name or EA index is invalid.
//
#define STATUS_NONEXISTENT_EA_ENTRY      ((NTSTATUS)0xC0000051L)

//
// MessageId: STATUS_NO_EAS_ON_FILE
//
// MessageText:
//
//  The file for which EAs were requested has no EAs.
//
#define STATUS_NO_EAS_ON_FILE            ((NTSTATUS)0xC0000052L)

//
// MessageId: STATUS_EA_CORRUPT_ERROR
//
// MessageText:
//
//  The EA is corrupt and non-readable.
//
#define STATUS_EA_CORRUPT_ERROR          ((NTSTATUS)0xC0000053L)

//
// MessageId: STATUS_FILE_LOCK_CONFLICT
//
// MessageText:
//
//  A requested read/write cannot be granted due to a conflicting file lock.
//
#define STATUS_FILE_LOCK_CONFLICT        ((NTSTATUS)0xC0000054L)

//
// MessageId: STATUS_LOCK_NOT_GRANTED
//
// MessageText:
//
//  A requested file lock cannot be granted due to other existing locks.
//
#define STATUS_LOCK_NOT_GRANTED          ((NTSTATUS)0xC0000055L)

//
// MessageId: STATUS_DELETE_PENDING
//
// MessageText:
//
//  A non close operation has been requested of a file object with a
//  delete pending.
//
#define STATUS_DELETE_PENDING            ((NTSTATUS)0xC0000056L)

//
// MessageId: STATUS_CTL_FILE_NOT_SUPPORTED
//
// MessageText:
//
//  An attempt was made to set the control attribute on a file.  This
//  attribute is not supported in the target file system.
//
#define STATUS_CTL_FILE_NOT_SUPPORTED    ((NTSTATUS)0xC0000057L)

//
// MessageId: STATUS_UNKNOWN_REVISION
//
// MessageText:
//
//  Indicates a revision number encountered or specified is not one
//  known by the service.  It may be a more recent revision than the
//  service is aware of.
//
#define STATUS_UNKNOWN_REVISION          ((NTSTATUS)0xC0000058L)

//
// MessageId: STATUS_REVISION_MISMATCH
//
// MessageText:
//
//  Indicates two revision levels are incompatible.
//
#define STATUS_REVISION_MISMATCH         ((NTSTATUS)0xC0000059L)

//
// MessageId: STATUS_INVALID_OWNER
//
// MessageText:
//
//  Indicates a particular Security ID may not be assigned as the
//  owner of an object.
//
#define STATUS_INVALID_OWNER             ((NTSTATUS)0xC000005AL)

//
// MessageId: STATUS_INVALID_PRIMARY_GROUP
//
// MessageText:
//
//  Indicates a particular Security ID may not be assigned as the
//  primary group of an object.
//
#define STATUS_INVALID_PRIMARY_GROUP     ((NTSTATUS)0xC000005BL)

//
// MessageId: STATUS_NO_IMPERSONATION_TOKEN
//
// MessageText:
//
//  An attempt has been made to operate on an impersonation token
//  by a thread that is not currently impersonating a client.
//
#define STATUS_NO_IMPERSONATION_TOKEN    ((NTSTATUS)0xC000005CL)

//
// MessageId: STATUS_CANT_DISABLE_MANDATORY
//
// MessageText:
//
//  A mandatory group may not be disabled.
//
#define STATUS_CANT_DISABLE_MANDATORY    ((NTSTATUS)0xC000005DL)

//
// MessageId: STATUS_NO_LOGON_SERVERS
//
// MessageText:
//
//  There are currently no logon servers available to service the logon
//  request.
//
#define STATUS_NO_LOGON_SERVERS          ((NTSTATUS)0xC000005EL)

//
// MessageId: STATUS_NO_SUCH_LOGON_SESSION
//
// MessageText:
//
//   A specified logon session does not exist.  It may already have
//   been terminated.
//
#define STATUS_NO_SUCH_LOGON_SESSION     ((NTSTATUS)0xC000005FL)

//
// MessageId: STATUS_NO_SUCH_PRIVILEGE
//
// MessageText:
//
//   A specified privilege does not exist.
//
#define STATUS_NO_SUCH_PRIVILEGE         ((NTSTATUS)0xC0000060L)

//
// MessageId: STATUS_PRIVILEGE_NOT_HELD
//
// MessageText:
//
//   A required privilege is not held by the client.
//
#define STATUS_PRIVILEGE_NOT_HELD        ((NTSTATUS)0xC0000061L)

//
// MessageId: STATUS_INVALID_ACCOUNT_NAME
//
// MessageText:
//
//  The name provided is not a properly formed account name.
//
#define STATUS_INVALID_ACCOUNT_NAME      ((NTSTATUS)0xC0000062L)

//
// MessageId: STATUS_USER_EXISTS
//
// MessageText:
//
//  The specified user already exists.
//
#define STATUS_USER_EXISTS               ((NTSTATUS)0xC0000063L)

//
// MessageId: STATUS_NO_SUCH_USER
//
// MessageText:
//
//  The specified user does not exist.
//
#define STATUS_NO_SUCH_USER              ((NTSTATUS)0xC0000064L)     // ntsubauth

//
// MessageId: STATUS_GROUP_EXISTS
//
// MessageText:
//
//  The specified group already exists.
//
#define STATUS_GROUP_EXISTS              ((NTSTATUS)0xC0000065L)

//
// MessageId: STATUS_NO_SUCH_GROUP
//
// MessageText:
//
//  The specified group does not exist.
//
#define STATUS_NO_SUCH_GROUP             ((NTSTATUS)0xC0000066L)

//