acinclude.m4

certi-SHM-3.0.tar 不错的开源的分布式方针软件 大家多多支持 他是linux

       CFLAGS="$ac_save_CFLAGS"
       LIBS="$ac_save_LIBS"
     fi
  fi
  if test "x$no_gtk" = x ; then
     AC_MSG_RESULT(yes)
     ifelse([$2], , :, [$2])     
  else
     AC_MSG_RESULT(no)
     if test "$GTK_CONFIG" = "no" ; then
       echo "*** The gtk-config script installed by GTK could not be found"
       echo "*** If GTK was installed in PREFIX, make sure PREFIX/bin is in"
       echo "*** your path, or set the GTK_CONFIG environment variable to the"
       echo "*** full path to gtk-config."
     else
       if test -f conf.gtktest ; then
        :
       else
          echo "*** Could not run GTK test program, checking why..."
          CFLAGS="$CFLAGS $GTK_CFLAGS"
          LIBS="$LIBS $GTK_LIBS"
          AC_TRY_LINK([
#include <gtk/gtk.h>
#include <stdio.h>
],      [ return ((gtk_major_version) || (gtk_minor_version) || (gtk_micro_version)); ],
        [ echo "*** The test program compiled, but did not run. This usually means"
          echo "*** that the run-time linker is not finding GTK or finding the wrong"
          echo "*** version of GTK. If it is not finding GTK, you'll need to set your"
          echo "*** LD_LIBRARY_PATH environment variable, or edit /etc/ld.so.conf to point"
          echo "*** to the installed location  Also, make sure you have run ldconfig if that"
          echo "*** is required on your system"
	  echo "***"
          echo "*** If you have an old version installed, it is best to remove it, although"
          echo "*** you may also be able to get things to work by modifying LD_LIBRARY_PATH"
          echo "***"
          echo "*** If you have a RedHat 5.0 system, you should remove the GTK package that"
          echo "*** came with the system with the command"
          echo "***"
          echo "***    rpm --erase --nodeps gtk gtk-devel" ],
        [ echo "*** The test program failed to compile or link. See the file config.log for the"
          echo "*** exact error that occured. This usually means GTK was incorrectly installed"
          echo "*** or that you have moved GTK since it was installed. In the latter case, you"
          echo "*** may want to edit the gtk-config script: $GTK_CONFIG" ])
          CFLAGS="$ac_save_CFLAGS"
          LIBS="$ac_save_LIBS"
       fi
     fi
     GTK_CFLAGS=""
     GTK_LIBS=""
     ifelse([$3], , :, [$3])
  fi
  AC_SUBST(GTK_CFLAGS)
  AC_SUBST(GTK_LIBS)
  rm -f conf.gtktest
])

## +--------------+ ##########################################################
## | Other Macros | ##########################################################
## +--------------+ ##########################################################

# /* This program is free software; you can redistribute it and/or modify
#    it under the terms of the GNU General Public License as published by
#    the Free Software Foundation; either version 2, or (at your option)
#    any later version.

#    This program is distributed in the hope that it will be useful,
#    but WITHOUT ANY WARRANTY; without even the implied warranty of
#    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
#    GNU General Public License for more details.  */

AC_DEFUN(ACX_WITH_GSSAPI,[
#
# Use --with-gssapi[=DIR] to enable GSSAPI support.
#
# defaults to enabled with DIR in default list below
#
# Search for /SUNHEA/ and read the comments about this default below.
#
AC_ARG_WITH([gssapi],
            [  --with-gssapi=value     GSSAPI directory],
            [acx_gssapi_withgssapi=$withval], [acx_gssapi_withgssapi=yes])dnl

dnl
dnl FIXME - cache withval and obliterate later cache values when options change
dnl
#
# Try to locate a GSSAPI installation if no location was specified, assuming
# GSSAPI was enabled (the default).
# 
if test -n "$acx_gssapi_cv_gssapi"; then
  # Granted, this is a slightly ugly way to print this info, but the
  # AC_CHECK_HEADER used in the search for a GSSAPI installation makes using
  # AC_CACHE_CHECK worse
  AC_MSG_CHECKING([for GSSAPI])
else :; fi
AC_CACHE_VAL([acx_gssapi_cv_gssapi], [
if test x$acx_gssapi_withgssapi = xyes; then
  # --with but no location specified
  # assume a gssapi.h or gssapi/gssapi.h locates our install.
  #
  # This isn't always strictly true.  For instance Solaris 7's SUNHEA (header)
  # package installs gssapi.h whether or not the necessary libraries are
  # installed.  I'm still not sure whether to consider this a bug.  The long
  # way around is to not consider GSSPAI installed unless gss_import_name is
  # found, but that brings up a lot of other hassles, like continuing to let
  # gcc & ld generate the error messages when the user uses --with-gssapi=dir
  # as a debugging aid.  The short way around is to disable GSSAPI by default,
  # but I think Sun users have been faced with this for awhile and I haven't
  # heard many complaints.
  acx_gssapi_save_CPPFLAGS=$CPPFLAGS
  for acx_gssapi_cv_gssapi in yes /usr/kerberos /usr/cygnus/kerbnet no; do
    if test x$acx_gssapi_cv_gssapi = xno; then
      break
    fi
    if test x$acx_gssapi_cv_gssapi = xyes; then
      AC_CHECKING([for GSSAPI])
    else
      CPPFLAGS="$acx_gssapi_save_CPPFLAGS -I$acx_gssapi_cv_gssapi/include"
      AC_CHECKING([for GSSAPI in $acx_gssapi_cv_gssapi])
    fi
    unset ac_cv_header_gssapi_h
    unset ac_cv_header_gssapi_gssapi_h
    AC_CHECK_HEADERS([gssapi.h gssapi/gssapi.h])
    if test "$ac_cv_header_gssapi_h" = "yes" ||
        test "$ac_cv_header_gssapi_gssapi_h" = "yes"; then
      break
    fi
  done
  CPPFLAGS=$acx_gssapi_save_CPPFLAGS
else
  acx_gssapi_cv_gssapi=$acx_gssapi_withgssapi
fi
AC_MSG_CHECKING([for GSSAPI])
])dnl
AC_MSG_RESULT([$acx_gssapi_cv_gssapi])

#
# Set up GSSAPI includes for later use.  We don't bother to check for
# $acx_gssapi_cv_gssapi=no here since that will be caught later.
#
if test x$acx_gssapi_cv_gssapi = yes; then
  # no special includes necessary
  GSSAPI_INCLUDES=""
else
  # GSSAPI at $acx_gssapi_cv_gssapi (could be 'no')
  GSSAPI_INCLUDES=" -I$acx_gssapi_cv_gssapi/include"
fi

#
# Get the rest of the information CVS needs to compile with GSSAPI support
#
if test x$acx_gssapi_cv_gssapi != xno; then
  # define HAVE_GSSAPI and set up the includes
  AC_DEFINE([HAVE_GSSAPI],, [Define if you have GSSAPI with Kerberos version 5 available.])
  includeopt=$includeopt$GSSAPI_INCLUDES

  # locate any other headers
  acx_gssapi_save_CPPFLAGS=$CPPFLAGS
  CPPFLAGS=$CPPFLAGS$GSSAPI_INCLUDES
  dnl We don't use HAVE_KRB5_H anywhere, but including it here might make it
  dnl easier to spot errors by reading configure output
  AC_CHECK_HEADERS([gssapi.h gssapi/gssapi.h gssapi/gssapi_generic.h krb5.h])
  # And look through them for GSS_C_NT_HOSTBASED_SERVICE or its alternatives
  AC_CACHE_CHECK([for GSS_C_NT_HOSTBASED_SERVICE], [acx_gssapi_cv_gss_c_nt_hostbased_service],
   [acx_gssapi_cv_gss_c_nt_hostbased_service=no
    if test "$ac_cv_header_gssapi_h" = "yes"; then
      AC_EGREP_HEADER([GSS_C_NT_HOSTBASED_SERVICE], [gssapi.h],
                      [acx_gssapi_cv_gss_c_nt_hostbased_service=yes],
                      AC_EGREP_HEADER([gss_nt_service_name], [gssapi.h],
                                      [acx_gssapi_cv_gss_c_nt_hostbased_service=gss_nt_service_name]))
    fi
    if test $acx_gssapi_cv_gss_c_nt_hostbased_service = no &&
        test "$ac_cv_header_gssapi_gssapi_h" = "yes"; then
      AC_EGREP_HEADER([GSS_C_NT_HOSTBASED_SERVICE], [gssapi/gssapi.h],
                      [acx_gssapi_cv_gss_c_nt_hostbased_service],
                      AC_EGREP_HEADER([gss_nt_service_name], [gssapi/gssapi.h],
                                      [acx_gssapi_cv_gss_c_nt_hostbased_service=gss_nt_service_name]))
    fi
    if test $acx_gssapi_cv_gss_c_nt_hostbased_service = no &&
        test "$ac_cv_header_gssapi_gssapi_generic_h" = "yes"; then
      AC_EGREP_HEADER([GSS_C_NT_HOSTBASED_SERVICE], [gssapi/gssapi_generic.h],
                      [acx_gssapi_cv_gss_c_nt_hostbased_service],
                      AC_EGREP_HEADER([gss_nt_service_name], [gssapi/gssapi_generic.h],
                                      [acx_gssapi_cv_gss_c_nt_hostbased_service=gss_nt_service_name]))
    fi])
  if test $acx_gssapi_cv_gss_c_nt_hostbased_service != yes &&
      test $acx_gssapi_cv_gss_c_nt_hostbased_service != no; then
    # don't define for yes since that means it already means something and
    # don't define for no since we'd rather the compiler catch the error
    AC_DEFINE_UNQUOTED([GSS_C_NT_HOSTBASED_SERVICE], [$acx_gssapi_cv_gss_c_nt_hostbased_service],
[Define to an alternative value if GSS_C_NT_HOSTBASED_SERVICE isn't defined
in the gssapi.h header file.  MIT Kerberos 1.2.1 requires this.  Only relevant
when using GSSAPI.])
  fi
  CPPFLAGS=$acx_gssapi_save_CPPFLAGS

  # Expect the libs to be installed parallel to the headers
  #
  # We could try once with and once without, but I'm not sure it's worth the
  # trouble.
  if test x$acx_gssapi_cv_gssapi != xyes; then
    if test -z "$LIBS"; then
      LIBS="-L$acx_gssapi_cv_gssapi/lib"
    else
      LIBS="-L$acx_gssapi_cv_gssapi/lib $LIBS"
    fi
  else :; fi

  dnl What happens if we want to enable, say, krb5 and some other GSSAPI
  dnl authentication method at the same time?
  #
  # Some of the order below is particular due to library dependencies
  #

  #
  # des                 Heimdal K 0.3d, but Heimdal seems to be set up such
  #                     that it could have been installed from elsewhere.
  #
  AC_SEARCH_LIBS([des_set_odd_parity], [des])

  #
  # com_err             Heimdal K 0.3d
  #
  # com_err             MIT K5 v1.2.2-beta1
  #
  AC_SEARCH_LIBS([com_err], [com_err])

  #
  # asn1                Heimdal K 0.3d          -lcom_err
  #
  AC_SEARCH_LIBS([initialize_asn1_error_table_r], [asn1])

  #
  # resolv              required, but not installed by Heimdal K 0.3d
  #
  # resolv              MIT K5 1.2.2-beta1
  #                     Linux 2.2.17
  #
  AC_SEARCH_LIBS([__dn_expand], [resolv])

  #
  # roken               Heimdal K 0.3d          -lresolv
  #
  AC_SEARCH_LIBS([roken_gethostbyaddr], [roken])

  #
  # k5crypto            MIT K5 v1.2.2-beta1
  #
  AC_SEARCH_LIBS([valid_enctype], [k5crypto])

  #
  # gen                 ? ? ?                   Needed on Irix 5.3 with some
  #                     Irix 5.3                version of Kerberos.  I'm not
  #                                             sure which since Irix didn't
  #                                             get any testing this time
  #                                             around.  Original comment:
  #
  # This is necessary on Irix 5.3, in order to link against libkrb5 --
  # there, an_to_ln.o refers to things defined only in -lgen.
  #
  AC_SEARCH_LIBS([compile], [gen])

  #
  # krb5                ? ? ?                   -lgen -l???
  #                     Irix 5.3
  #
  # krb5                MIT K5 v1.1.1
  #
  # krb5                MIT K5 v1.2.2-beta1     -lcrypto -lcom_err
  #                     Linux 2.2.17
  #
  # krb5                MIT K5 v1.2.2-beta1     -lcrypto -lcom_err -lresolv
  #
  # krb5                Heimdal K 0.3d          -lasn1 -lroken -ldes
  #
  AC_SEARCH_LIBS([krb5_free_context], [krb5])

  #
  # gssapi_krb5         Only lib needed with MIT K5 v1.2.1, so find it first in
  #                     order to prefer MIT Kerberos.  If both MIT & Heimdal
  #                     Kerberos are installed and in the path, this will leave
  #                     some of the libraries above in LIBS unnecessarily, but
  #                     noone would ever do that, right?
  #
  # gssapi_krb5         MIT K5 v1.2.2-beta1     -lkrb5
  #
  # gssapi              Heimdal K 0.3d          -lkrb5
  #
  AC_SEARCH_LIBS([gss_import_name], [gssapi_krb5 gssapi])
fi
])dnl