lnk0t.xcl

针对蓄电池充电过程中出现的种种问题

/*                      - lnk0t.xcl -

    XLINK command file for the ICCA90 C-compiler using the -v0, -mt options.
    Segments are defined for a generic AT90S with a maximum of
    160 bytes data address space and   8 Kbytes program address space.

    Usage: xlink your_file(s) -f lnk0t

    File version:   $Revision: 1.9 $

    The following segments are used by the compiler:

    Program address space read only segments (internal Flash)
    =========================================================
    segment     address range  max size (dec)  used with compiler options    
    -------     -------------  --------------  --------------------------    
    INTVEC          0 -    1B   28 bytes       -e ("interrupt" keyword)      
    RCODE          1C -  1FFF    8 Kbytes     
    SWITCH         1C -  1FFF    8 Kbytes     
    FLASH          1C -  1FFF    8 Kbytes      -e ("flash" keyword)          
    CDATA0         1C -  1FFF    8 Kbytes                                    
    CDATA1         1C -  1FFF    8 Kbytes      -e ("near" keyword)           
    CCSTR          1C -  1FFF    8 Kbytes                                    
    CODE           1C -  1FFF    8 Kbytes     

    Data address space read/write segments
    ==============================================================
    segment     address range  max size (dec)  used with compiler options    
    -------     -------------  --------------  --------------------------    
    UDATA0         60 -    FF  224 bytes                                     
    IDATA0         60 -    FF  224 bytes                                     
    CSTACK         60 -    FF  224 bytes      
    RSTACK         60 -    FF  224 bytes      
    UDATA1         60 -    FF  160 bytes       -e ("near" keyword)           
    IDATA1         60 -    FF  160 bytes       -e ("near" keyword)           
    ECSTR          60 -    FF  224 bytes      

   "tiny" pointers can only access objects in the range 0-FF.
    Strings and constants are placed in RAM (segments IDATA0 and ECSTR
    respectively). Initial values are copied from program space 
    (CDATA0 and CCSTR respectively).
*/

/*  First define CPU */

-ca90

// Program address space (internal Flash memory) 
-Z(CODE)INTVEC,RCODE,CDATA0,CCSTR,SWITCH,FLASH,CODE=00-7FF

/* 
   Data address space 
   Built-in SRAM in 60-FF. The registers are in 0-1F and 
   memmory mapped I/O in 20-5F 
*/

-Z(DATA)IDATA0,UDATA0,ECSTR,CSTACK+40,RSTACK+30=60-DF

/*  Select reduced "printf" support to reduce library size.
    See configuration section in manual concerning printf/sprintf. */

-e_small_write=_formatted_write
-e_small_write_P=_formatted_write_P

/*  Disable floating-point support in "scanf" to reduce library size.
    See configuration section in manual concerning scanf/sscanf */

-e_medium_read=_formatted_read
-e_medium_read_P=_formatted_read_P

// Suppress one warning which is not relevant for this processor 
-w29

//  Now load the 'C' library 

cl0t

/*  Code will now reside in file aout.a90 or aout.d90, unless -o is specified 
   .d90 is the default if debug system is linked (option -r) 
   .a90 is the default without debugging. Default format is -Fmotorola */