hpijs_readme.html

HP喷墨打印机驱动代码 HP内部资料！ 珍贵 珍贵 珍贵

     Quality=1 ColorMode=0 MediaType=0 PenSet=2
   <b>Draft Color</b> 
     Quality=1 ColorMode=2 MediaType=0 PenSet=2	
   <b>Normal Grayscale</b> 
     Quality=0 ColorMode=0 MediaType=0 PenSet=2
   <b>Normal Color</b> (default)
     Quality=0 ColorMode=2 MediaType=0 PenSet=2	 
   <b>Photo</b>
     Quality=2 ColorMode=2 MediaType=2 PenSet=2	 
   <b>HiRes</b>
     Quality=3 ColorMode=2 MediaType=2 PenSet=2	    
</pre>
<p>
<li>
<b>DeskJet 3320 series (DJ3320)</b> - 
The DJ3320 device class will support single pen printing.
           Resolution setting 600x600 is available for Normal and Photo modes. 
<p>
The 3320 series handles pen alignment parameters differently than normal HP inkjet printers. Most inkjets store 
pen alignment parameters in the printer and any pen alignment values would be used by printer firmware. 
For the 3320 pen alignment parameters are stored in the printer, but any pen alignment would be performed
by the device class.
<p>
Currently the DJ3320 device class does not use pen alignment parameters stored in the printer. 
This could be a issue with two pen color print modes - Draft Color and Normal Color (KCMY). 
This is not a problem for two pen Photo mode (mostly CMY). 
<p>
If there are pen alignment issues with two pen color printing, use a single pen color print mode (ie: PenSet=1). 
We are currently evaluating pen alignment options and expect to address this issue in a future release.
<p>
The following options can be selected with Ghostscript commands.
<pre>
   <b>DeviceModel</b>
     deskjet 3320
     deskjet 3420
     deskjet 3425
     deskjet 3500
     officejet 4100
     officejet 4200
     psc 1100 series
     psc 1200 series

   <b>Draft Grayscale</b> 
     Quality=1 ColorMode=0 MediaType=0 PenSet=0
   <b>Draft Color</b> 
     Quality=1 ColorMode=2 MediaType=0 PenSet=1
     Quality=1 ColorMode=2 MediaType=0 PenSet=2	
   <b>Normal Grayscale</b> 
     Quality=0 ColorMode=0 MediaType=0 PenSet=0
   <b>Normal Color</b> 
     Quality=0 ColorMode=2 MediaType=0 PenSet=1
     Quality=0 ColorMode=2 MediaType=0 PenSet=2	(default)
   <b>Photo</b>
     Quality=2 ColorMode=2 MediaType=2 PenSet=1
     Quality=2 ColorMode=2 MediaType=2 PenSet=2	    
</pre>
<p>
<li>
<b>DeskJet 3600 series (DJ3600)</b> - 
The DJ3600 device class supports full bleed (borderless) printing.
DJ3600 is backward compatable with DJ3320. This means all DJ3320 caveats apply to DJ3600. 
           Resolution setting 600x600 is available for Normal and Photo modes. 
The photo pen is also supported.
<p>
Full bleed support is paper size specific. Full bleed is only available for paper sizes Oufuku-Hagaki or smaller.
<p>
The following options can be selected with Ghostscript commands.
<pre>
   <b>DeviceModel</b>
     deskjet 3600
     officejet 5500
     psc 1300
     psc 1310

   <b>Draft Grayscale</b> 
     Quality=1 ColorMode=0 MediaType=0 PenSet=0
   <b>Draft Color</b> 
     Quality=1 ColorMode=2 MediaType=0 PenSet=1
     Quality=1 ColorMode=2 MediaType=0 PenSet=2	
   <b>Normal Grayscale</b> 
     Quality=0 ColorMode=0 MediaType=0 PenSet=0
   <b>Normal Color</b> 
     Quality=0 ColorMode=2 MediaType=0 PenSet=1
     Quality=0 ColorMode=2 MediaType=0 PenSet=2	(default)
   <b>Photo</b>
     Quality=2 ColorMode=2 MediaType=2 PenSet=1
     Quality=2 ColorMode=2 MediaType=2 PenSet=2	    
     Quality=2 ColorMode=2 MediaType=2 PenSet=4	    
</pre>
<p>
<li>
<b>DeskJet 5550 series (DJGenericVIP)</b> -
The DJGenericVIP device class supports full bleed (borderless) printing. 
Single pen printing is supported, but this is independent of the driver. 
DJGenericVIP is backward compatable with DJ9xxVIP.
<p>
In Draft and Normal modes the DJGenericVIP device class will detect photo paper and automatically print in Photo mode.
HiRes is another photo mode which supports the maximum resolution of the printer.
HiRes mode does not do auto media detection.
           Resolution setting 600x600 is available for Normal modes. 
           Resolution setting 1200x1200 is available for HiRes mode.
<p>
           Duplex printing is supported.
Duplex is not available in HiRes mode.
<p>
Note, the Deskjet 450 does not support auto media detection and full bleed. Use Photo or HiRes mode for photo media. 
<p>
Full bleed support is paper size specific. Full bleed is only available for paper sizes Oufuku-Hagaki or smaller.
<p> 
Current full bleed support is 3-sided. We are currently evaluating 4-sided large paper size or smaller full bleed
support (ie: Deskjet 5100/5600) and expect to address this issue in a future release. 
<p>
The following options can be selected with Ghostscript commands.
<pre>
   <b>DeviceModel</b>
     dj450
     deskjet 5100
     deskjet 5550
     deskjet 5551
     deskjet 5600
     deskjet 5800
     deskjet 9600
     photosmart 7150
     photosmart 7260
     photosmart 7268
     photosmart 7345
     photosmart 7350
     photosmart 7550
     photosmart 7660
     photosmart 7760
     photosmart 7960
     OfficeJet 6100
     OfficeJet 6150
     PSC 2100
     PSC 2150
     PSC 2170
     PSC 2200
     psc 2300
     psc 2400
     psc 2500

   <b>Draft Grayscale</b> 
     Quality=1 ColorMode=0 MediaType=0 PenSet=2
   <b>Draft Color</b> 
     Quality=1 ColorMode=2 MediaType=0 PenSet=2	
   <b>Normal Grayscale</b> 
     Quality=0 ColorMode=0 MediaType=0 PenSet=2
   <b>Normal Color</b> (default)
     Quality=0 ColorMode=2 MediaType=0 PenSet=2	 
   <b>Photo</b>
     Quality=2 ColorMode=2 MediaType=2 PenSet=2	 
   <b>HiRes</b>
     Quality=3 ColorMode=2 MediaType=2 PenSet=2	    
</pre>
<p>
<li>
<b>Apollo 2000 series (AP2xxx)</b> -    
The AP2xxx device class will support single <b>color</b> pen printing.
           Resolution setting 600x300 is required for Best Grayscale mode. 
The following options can be selected with Ghostscript commands. 
<pre>
   <b>DeviceModel</b>
     APOLLO P-22 (Apollo 2200/2250)

   <b>Draft Grayscale</b>
     Quality=1 ColorMode=0 MediaType=0 PenSet=2
   <b>Draft Color</b>
     Quality=1 ColorMode=2 MediaType=0 PenSet=1
     Quality=1 ColorMode=2 MediaType=0 PenSet=2
   <b>Normal Grayscale</b> 
     Quality=0 ColorMode=0 MediaType=0 PenSet=2
   <b>Normal Color</b> 
     Quality=0 ColorMode=2 MediaType=0 PenSet=1	(default)    
     Quality=0 ColorMode=2 MediaType=0 PenSet=2	    
   <b>Best Grayscale</b>
     Quality=2 ColorMode=0 MediaType=0 PenSet=2
   <b>Photo</b>
     Quality=2 ColorMode=2 MediaType=1 PenSet=4	    
</pre>
<p>
<li>
<b>Apollo 2100 series (AP21xx)</b> -  
The AP21xx device class will support single <b>color</b> pen printing.
           Resolution setting 600x300 is required for Best Grayscale mode. 
The following options can be selected with Ghostscript commands. 
<pre>
   <b>DeviceModel</b>
     P-2000U (Apollo 2100/2150)

   <b>Draft Grayscale</b>
     Quality=1 ColorMode=0 MediaType=0 PenSet=2
   <b>Draft Color</b>
     Quality=1 ColorMode=2 MediaType=0 PenSet=1
     Quality=1 ColorMode=2 MediaType=0 PenSet=2
   <b>Normal Grayscale</b> 
     Quality=0 ColorMode=0 MediaType=0 PenSet=2
   <b>Normal Color</b> 
     Quality=0 ColorMode=2 MediaType=0 PenSet=1	(default)    
     Quality=0 ColorMode=2 MediaType=0 PenSet=2	    
   <b>Best Grayscale</b>
     Quality=2 ColorMode=0 MediaType=0 PenSet=2
   <b>Photo</b>
     Quality=2 ColorMode=2 MediaType=1 PenSet=4	    
</pre>
<p>
<li>
<b>Apollo 2560 series (AP2560)</b> - 
The AP2560 device class will support single <b>color</b> pen printing.
           Resolution setting 600x300 is required for Best Grayscale mode. 
The following options can be selected with Ghostscript commands. 
<pre>
   <b>DeviceModel</b>
     APOLLO P2500/2600

   <b>Draft Grayscale</b>
     Quality=1 ColorMode=0 MediaType=0 PenSet=2
   <b>Draft Color</b>
     Quality=1 ColorMode=2 MediaType=0 PenSet=1
     Quality=1 ColorMode=2 MediaType=0 PenSet=2
   <b>Normal Grayscale</b> 
     Quality=0 ColorMode=0 MediaType=0 PenSet=2
   <b>Normal Color</b> 
     Quality=0 ColorMode=2 MediaType=0 PenSet=1	(default)    
     Quality=0 ColorMode=2 MediaType=0 PenSet=2	    
   <b>Best Grayscale</b>
     Quality=2 ColorMode=0 MediaType=0 PenSet=2
   <b>Photo</b>
     Quality=2 ColorMode=2 MediaType=1 PenSet=4	    
</pre>
<p>
<li>
<b>Photosmart 100 series (PS100)</b> -  
The PS100 device class supports full bleed (borderless) photo printing and only uses the color pen.
In Normal mode the 100 series printers will detect photo paper and automatically print in Photo mode.
HiRes is another photo mode which supports the maximum resolution of the printer.
HiRes mode does not do auto media detection like Normal mode.
Resolution setting 600x600 is available for Normal mode.
           Resolution setting 1200x1200 is available for HiRes mode. 
<p>
The following options can be selected with Ghostscript commands. 
<pre>
   <b>DeviceModel</b>
     PHOTOSMART 100
     PHOTOSMART 130
     photosmart 140
     PHOTOSMART 230
     photosmart 240     

   <b>Normal</b> (default)
     Quality=0 ColorMode=2 MediaType=0 PenSet=1 FullBleed=1	    
   <b>HiRes</b> 
     Quality=3 ColorMode=2 MediaType=2 PenSet=1 FullBleed=1