programview.cpp

用VC编制的集成的野人和八数码演示程序。其中野人程序用动态的效果演示

// ProgramView.cpp : CProgramView 类的实现

#include "stdafx.h"
#include "Program.h"

#include "ProgramDoc.h"
#include "ProgramView.h"
#include ".\programview.h"

#ifdef _DEBUG
#define new DEBUG_NEW
#endif

#include "IntelligenceDlg.h"
#include "AiResult.h"
#include "McSpeed.h"
#include "EightNumberDlg.h"
// CProgramView

IMPLEMENT_DYNCREATE(CProgramView, CScrollView)

BEGIN_MESSAGE_MAP(CProgramView, CScrollView)
	// 标准打印命令
	ON_COMMAND(ID_FILE_PRINT, CScrollView::OnFilePrint)
	ON_COMMAND(ID_FILE_PRINT_DIRECT, CScrollView::OnFilePrint)
	ON_COMMAND(ID_FILE_PRINT_PREVIEW, CScrollView::OnFilePrintPreview)
	ON_COMMAND(ID_INTELLIGENCE_BEGIN, OnIntelligenceBegin)
	ON_COMMAND(ID_MC_BEGIN, OnMcBegin)
	ON_COMMAND(ID_EIGHTNUMBER_BEGIN, OnEightnumberBegin)
	ON_COMMAND(ID_EIGHTNUMBER_SHOW_ALL, OnEightnumberShowAll)
	ON_UPDATE_COMMAND_UI(ID_EIGHTNUMBER_SHOW_ALL, OnUpdateEightnumberShowAll)
	ON_COMMAND(ID_EIGHTNUMBER_SHOW_RESULT, OnEightnumberShowResult)
	ON_UPDATE_COMMAND_UI(ID_EIGHTNUMBER_SHOW_RESULT, OnUpdateEightnumberShowResult)
	ON_WM_TIMER()
	ON_UPDATE_COMMAND_UI(ID_INTELLIGENCE_BEGIN, OnUpdateIntelligenceBegin)
	ON_UPDATE_COMMAND_UI(ID_EIGHTNUMBER_BEGIN, OnUpdateEightnumberBegin)
	ON_UPDATE_COMMAND_UI(ID_MC_BEGIN, OnUpdateMcBegin)
	ON_COMMAND(ID_MC_SETUP_SPEED, OnMcSetupSpeed)
	ON_UPDATE_COMMAND_UI(ID_MC_SETUP_SPEED, OnUpdateMcSetupSpeed)
END_MESSAGE_MAP()

// CProgramView 构造/析构

CProgramView::CProgramView()
: m_bMissionarySavage(false)
, m_bEightNumber(false)
, m_bEightNumberAll(true)
, m_bEightNumberResult(false)
, m_nMcSpeed(40)
{
	// TODO: 在此处添加构造代码

}

CProgramView::~CProgramView()
{
}

BOOL CProgramView::PreCreateWindow(CREATESTRUCT& cs)
{
	// TODO: 在此处通过修改 CREATESTRUCT cs 来修改窗口类或
	// 样式

	return CScrollView::PreCreateWindow(cs);
}

// CProgramView 绘制

void CProgramView::OnDraw(CDC* pDC)
{
	CProgramDoc* pDoc = GetDocument();
	ASSERT_VALID(pDoc);
	if (!pDoc)
		return;

	// TODO: 在此处为本机数据添加绘制代码
		CSize sizeTotal;
	// TODO: 计算此视图的合计大小
	sizeTotal.cx = sizeTotal.cy = 100;
	if ( m_bEightNumber )
		if ( m_bEightNumberAll )
		    sizeTotal=m_cEightNumber.showAll(pDC,m_cEightNumber.getResultList(),m_nEightNumber);
		else
			sizeTotal=m_cEightNumber.showResult(pDC,m_cEightNumber.getResultList(),m_nEightNumber);
	if ( m_bMissionarySavage )
		if ( m_cMissionarySavage.show(pDC) )
		{
			KillTimer( 1 );
			m_bMissionarySavage = false;
			AfxMessageBox("演示完毕");
		}
	SetScrollSizes(MM_TEXT, sizeTotal);
}

void CProgramView::OnInitialUpdate()
{
	CScrollView::OnInitialUpdate();
	CSize sizeTotal;
	// TODO: 计算此视图的合计大小
	sizeTotal.cx = sizeTotal.cy = 100;
	SetScrollSizes(MM_TEXT, sizeTotal);
	m_cMissionarySavage.searchByAlgorithm();
}


// CProgramView 打印

BOOL CProgramView::OnPreparePrinting(CPrintInfo* pInfo)
{
	// 默认准备
	return DoPreparePrinting(pInfo);
}

void CProgramView::OnBeginPrinting(CDC* /*pDC*/, CPrintInfo* /*pInfo*/)
{
	// TODO: 打印前添加额外的初始化
}

void CProgramView::OnEndPrinting(CDC* /*pDC*/, CPrintInfo* /*pInfo*/)
{
	// TODO: 打印后添加清除过程
}


// CProgramView 诊断

#ifdef _DEBUG
void CProgramView::AssertValid() const
{
	CScrollView::AssertValid();
}

void CProgramView::Dump(CDumpContext& dc) const
{
	CScrollView::Dump(dc);
}

CProgramDoc* CProgramView::GetDocument() const // 非调试版本是内联的
{
	ASSERT(m_pDocument->IsKindOf(RUNTIME_CLASS(CProgramDoc)));
	return (CProgramDoc*)m_pDocument;
}
#endif //_DEBUG


// CProgramView 消息处理程序

void CProgramView::OnIntelligenceBegin()
{
	// TODO: 在此添加命令处理程序代码
	m_bEightNumber = false;
	Invalidate();
	CIntelligenceDlg i_cIntelligenceDlg;
	if ( i_cIntelligenceDlg.DoModal()==IDOK )
	{
		if (m_cIntelligence.initIntelligence(i_cIntelligenceDlg.m_strSource,i_cIntelligenceDlg.m_strDestination))
		{
			BeginWaitCursor();
		    if ( m_cIntelligence.searchByAlgorithm() )
			    AfxMessageBox("恭喜你！已经找到目标结点");
		    else
			    AfxMessageBox("找不到目标结点");
		    m_cIntelligence.generateList();
			EndWaitCursor();
		    CAiResult i_cAiResult;
	    	i_cAiResult.m_pIntelligence = m_cIntelligence.getResultList();
		    i_cAiResult.DoModal();
		}
		else
			AfxMessageBox("初始化错误");
	}
}
void CProgramView::OnUpdateIntelligenceBegin(CCmdUI *pCmdUI)
{
	// TODO: 在此添加命令更新用户界面处理程序代码
	pCmdUI->Enable( !m_bMissionarySavage );
}
void CProgramView::OnMcBegin()
{
	// TODO: 在此添加命令处理程序代码
	if ( !m_bMissionarySavage )
	{
	    m_cMissionarySavage.setTimer();
	    m_bMissionarySavage = true;
	    m_bEightNumber = false;
	    SetTimer(1,m_nMcSpeed,NULL);
	}
	else
	{
		KillTimer( 1 );
		m_bMissionarySavage = false;
	}
	Invalidate();
}
void CProgramView::OnUpdateMcBegin(CCmdUI *pCmdUI)
{
	// TODO: 在此添加命令更新用户界面处理程序代码
	if ( !m_bMissionarySavage )
		pCmdUI->SetText("演示\tCtrl+D");
	else
		pCmdUI->SetText("停止演示\tCtrl+D");
}
void CProgramView::OnMcSetupSpeed()
{
	// TODO: 在此添加命令处理程序代码
	CMcSpeed i_cMcSpeed;
	if ( i_cMcSpeed.DoModal() )
		m_nMcSpeed = i_cMcSpeed.m_nMcSpeed;
}
void CProgramView::OnUpdateMcSetupSpeed(CCmdUI *pCmdUI)
{
	// TODO: 在此添加命令更新用户界面处理程序代码
	pCmdUI->Enable( !m_bMissionarySavage );
}
void CProgramView::OnEightnumberBegin()
{
	// TODO: 在此添加命令处理程序代码
	m_bEightNumber = false;
	Invalidate();
	CEightNumberDlg i_cEightNumberDlg;
	if( i_cEightNumberDlg.DoModal() == IDOK )
	{
		if ( m_cEightNumber.initEightNumber ( i_cEightNumberDlg.m_aEightNumber ) )
		{
			BeginWaitCursor();
			if ( m_cEightNumber.searchByAlgorithm() )
			{
				m_nEightNumber = m_cEightNumber.getResultNum();
				AfxMessageBox("恭喜你！已经找到目标结点");
			}
			else
			{
				m_nEightNumber = 50;
				AfxMessageBox("算法失败！请换其它数据试试");
			}
			EndWaitCursor();
			m_bEightNumber = true;
			Invalidate();
		}
		else
			AfxMessageBox("八数码问题的初始化非法");
	}
}

void CProgramView::OnUpdateEightnumberBegin(CCmdUI *pCmdUI)
{
	// TODO: 在此添加命令更新用户界面处理程序代码
	pCmdUI->Enable( !m_bMissionarySavage );
}
void CProgramView::OnEightnumberShowAll()
{
	// TODO: 在此添加命令处理程序代码
	m_bEightNumberAll = true;
	m_bEightNumberResult = false;
	Invalidate();
}

void CProgramView::OnUpdateEightnumberShowAll(CCmdUI *pCmdUI)
{
	// TODO: 在此添加命令更新用户界面处理程序代码
	pCmdUI->SetRadio( m_bEightNumberAll );
	pCmdUI->Enable( !m_bMissionarySavage );
}

void CProgramView::OnEightnumberShowResult()
{
	// TODO: 在此添加命令处理程序代码
	m_bEightNumberAll = false;
	m_bEightNumberResult = true;
	Invalidate();
}

void CProgramView::OnUpdateEightnumberShowResult(CCmdUI *pCmdUI)
{
	// TODO: 在此添加命令更新用户界面处理程序代码
	pCmdUI->SetRadio( m_bEightNumberResult );
	pCmdUI->Enable( !m_bMissionarySavage );
}

void CProgramView::OnTimer(UINT nIDEvent)
{
	// TODO: 在此添加消息处理程序代码和/或调用默认值
	Invalidate();

	CScrollView::OnTimer(nIDEvent);
}