ucos2xx.cmd

uCOS_II在TMS320LF2407demo板上的移植.压宿包一个,还是不错的

/*--------------------------------------------------------------------------*/
/*  LINKER COMMAND FILE - MEMORY SPECIFICATION for F2407 DSK  	    	   */
/*  Last update 8 JULY 2001				         		   */
/*--------------------------------------------------------------------------*/
MEMORY
{           
/*程序空间*/
PAGE 0:		
	VECS:	ORIGIN=00000H,LENGTH=00040H  	/*中断向量存贮空间*/
	PVECS:	ORIGIN=00044H,LENGTH=00100H		/*外围中断向量*/
	PROG:	ORIGIN=00150H,LENGTH=07EB0H		/*片内flash存储空间*/
/*数据空间*/
PAGE 1:						
	MMRS:		ORIGIN=0H,LENGTH=60H		/*存储器映射的寄存器和保留地址*/
	B2:			ORIGIN=60H,LENGTH=20H		/*块B2*/
	B0:		 	ORIGIN=200H,LENGTH=100H		/*块B0,如果CNF=0，则分配为片内ARAM*/
	B1:		  	ORIGIN=300H,LENGTH=100H		/*块B1*/
	SARAM:	 	ORIGIN=800H,LENGTH=800H		/*如果正确培植SCSR2寄存器，则此为数据空间中的2K SARAM*/
	PERIPH:		ORIGIN=7000H,LENGTH=1000H	/*外围寄存器空间*/
/*	EX2:		ORIGIN=8000H,LENGTH=8000H	/*外围数据RAM*/
	DATA:		ORIGIN=8000H,LENGTH=0800H	/*外围数据RAM*/
/*I/O存储空间*/
PAGE 2:						
	IO_EX:		ORIGIN=0000H,LENGTH=0FFF0H	/*外部的I/O映射空间*/
	IO_IN:		ORIGIN=0FFF0H,LENGTH=0FH	/*片内的I/O映射空间*/
}
/*------------------------------------------------------------------------*/
/* SECTIONS ALLOCATION                                                    */
/*-------------------------------------------------------------- ---------*/
SECTIONS
{
	.reset:		{ }>VECS	PAGE 0	/*中断向量表*/
	.vectors:	{ }>VECS	PAGE 0
	.pvecs:		{ }>PVECS	PAGE 0
	.text:		{ }>PROG	PAGE 0
	.cinit:		{ }>PROG	PAGE 0 
	.switch:    { }>PROG    PAGE 0
	.const:		{ }>DATA	PAGE 1
	.bss:		{ }>DATA	PAGE 1
	.data:		{ }>DATA	PAGE 1
	.stack:     { }>DATA	PAGE 1
/*	.const:		{ }>SARAM	PAGE 1
	.bss:		{ }>SARAM	PAGE 1
    .data:		{ }>EX2		PAGE 1
	.stack:		{ }>B1		PAGE 1       */
}