winioctl.h

希望我上传的这些东西可以对搞编程的程序员有点小小的帮助！谢谢！

#pragma option push -b -a8 -pc -A- /*P_O_Push*/
/*++ BUILD Version: 0013    // Increment this if a change has global effects

Copyright (c) 1990-1999  Microsoft Corporation

Module Name:

    winioctl.h

Abstract:

    This module defines the 32-Bit Windows Device I/O control codes.

Revision History:

--*/


//
// Interface GUIDs
//
// need these GUIDs outside conditional includes so that user can
//   #include <winioctl.h> in precompiled header
//   #include <initguid.h> in a single source file
//   #include <winioctl.h> in that source file a second time to instantiate the GUIDs
//
#ifdef DEFINE_GUID
//
// Make sure FAR is defined...
//
#ifndef FAR
#ifdef _WIN32
#define FAR
#else
#define FAR _far
#endif
#endif

DEFINE_GUID(DiskClassGuid,               0x53f56307L, 0xb6bf, 0x11d0, 0x94, 0xf2, 0x00, 0xa0, 0xc9, 0x1e, 0xfb, 0x8b);
DEFINE_GUID(CdRomClassGuid,              0x53f56308L, 0xb6bf, 0x11d0, 0x94, 0xf2, 0x00, 0xa0, 0xc9, 0x1e, 0xfb, 0x8b);
DEFINE_GUID(PartitionClassGuid,          0x53f5630aL, 0xb6bf, 0x11d0, 0x94, 0xf2, 0x00, 0xa0, 0xc9, 0x1e, 0xfb, 0x8b);
DEFINE_GUID(TapeClassGuid,               0x53f5630bL, 0xb6bf, 0x11d0, 0x94, 0xf2, 0x00, 0xa0, 0xc9, 0x1e, 0xfb, 0x8b);
DEFINE_GUID(WriteOnceDiskClassGuid,      0x53f5630cL, 0xb6bf, 0x11d0, 0x94, 0xf2, 0x00, 0xa0, 0xc9, 0x1e, 0xfb, 0x8b);
DEFINE_GUID(VolumeClassGuid,             0x53f5630dL, 0xb6bf, 0x11d0, 0x94, 0xf2, 0x00, 0xa0, 0xc9, 0x1e, 0xfb, 0x8b);
DEFINE_GUID(MediumChangerClassGuid,      0x53f56310L, 0xb6bf, 0x11d0, 0x94, 0xf2, 0x00, 0xa0, 0xc9, 0x1e, 0xfb, 0x8b);
DEFINE_GUID(FloppyClassGuid,             0x53f56311L, 0xb6bf, 0x11d0, 0x94, 0xf2, 0x00, 0xa0, 0xc9, 0x1e, 0xfb, 0x8b);
DEFINE_GUID(CdChangerClassGuid,          0x53f56312L, 0xb6bf, 0x11d0, 0x94, 0xf2, 0x00, 0xa0, 0xc9, 0x1e, 0xfb, 0x8b);
DEFINE_GUID(StoragePortClassGuid,        0x2accfe60L, 0xc130, 0x11d2, 0xb0, 0x82, 0x00, 0xa0, 0xc9, 0x1e, 0xfb, 0x8b);
DEFINE_GUID(GUID_CLASS_COMPORT,          0x86e0d1e0L, 0x8089, 0x11d0, 0x9c, 0xe4, 0x08, 0x00, 0x3e, 0x30, 0x1f, 0x73);
DEFINE_GUID(GUID_SERENUM_BUS_ENUMERATOR, 0x4D36E978L, 0xE325, 0x11CE, 0xBF, 0xC1, 0x08, 0x00, 0x2B, 0xE1, 0x03, 0x18);
#endif // DEFINE_GUID

#ifndef _WINIOCTL_
#define _WINIOCTL_


#ifndef _DEVIOCTL_
#define _DEVIOCTL_

// begin_ntddk begin_wdm begin_nthal begin_ntifs
//
// Define the various device type values.  Note that values used by Microsoft
// Corporation are in the range 0-32767, and 32768-65535 are reserved for use
// by customers.
//

#define DEVICE_TYPE DWORD

#define FILE_DEVICE_BEEP                0x00000001
#define FILE_DEVICE_CD_ROM              0x00000002
#define FILE_DEVICE_CD_ROM_FILE_SYSTEM  0x00000003
#define FILE_DEVICE_CONTROLLER          0x00000004
#define FILE_DEVICE_DATALINK            0x00000005
#define FILE_DEVICE_DFS                 0x00000006
#define FILE_DEVICE_DISK                0x00000007
#define FILE_DEVICE_DISK_FILE_SYSTEM    0x00000008
#define FILE_DEVICE_FILE_SYSTEM         0x00000009
#define FILE_DEVICE_INPORT_PORT         0x0000000a
#define FILE_DEVICE_KEYBOARD            0x0000000b
#define FILE_DEVICE_MAILSLOT            0x0000000c
#define FILE_DEVICE_MIDI_IN             0x0000000d
#define FILE_DEVICE_MIDI_OUT            0x0000000e
#define FILE_DEVICE_MOUSE               0x0000000f
#define FILE_DEVICE_MULTI_UNC_PROVIDER  0x00000010
#define FILE_DEVICE_NAMED_PIPE          0x00000011
#define FILE_DEVICE_NETWORK             0x00000012
#define FILE_DEVICE_NETWORK_BROWSER     0x00000013
#define FILE_DEVICE_NETWORK_FILE_SYSTEM 0x00000014
#define FILE_DEVICE_NULL                0x00000015
#define FILE_DEVICE_PARALLEL_PORT       0x00000016
#define FILE_DEVICE_PHYSICAL_NETCARD    0x00000017
#define FILE_DEVICE_PRINTER             0x00000018
#define FILE_DEVICE_SCANNER             0x00000019
#define FILE_DEVICE_SERIAL_MOUSE_PORT   0x0000001a
#define FILE_DEVICE_SERIAL_PORT         0x0000001b
#define FILE_DEVICE_SCREEN              0x0000001c
#define FILE_DEVICE_SOUND               0x0000001d
#define FILE_DEVICE_STREAMS             0x0000001e
#define FILE_DEVICE_TAPE                0x0000001f
#define FILE_DEVICE_TAPE_FILE_SYSTEM    0x00000020
#define FILE_DEVICE_TRANSPORT           0x00000021
#define FILE_DEVICE_UNKNOWN             0x00000022
#define FILE_DEVICE_VIDEO               0x00000023
#define FILE_DEVICE_VIRTUAL_DISK        0x00000024
#define FILE_DEVICE_WAVE_IN             0x00000025
#define FILE_DEVICE_WAVE_OUT            0x00000026
#define FILE_DEVICE_8042_PORT           0x00000027
#define FILE_DEVICE_NETWORK_REDIRECTOR  0x00000028
#define FILE_DEVICE_BATTERY             0x00000029
#define FILE_DEVICE_BUS_EXTENDER        0x0000002a
#define FILE_DEVICE_MODEM               0x0000002b
#define FILE_DEVICE_VDM                 0x0000002c
#define FILE_DEVICE_MASS_STORAGE        0x0000002d
#define FILE_DEVICE_SMB                 0x0000002e
#define FILE_DEVICE_KS                  0x0000002f
#define FILE_DEVICE_CHANGER             0x00000030
#define FILE_DEVICE_SMARTCARD           0x00000031
#define FILE_DEVICE_ACPI                0x00000032
#define FILE_DEVICE_DVD                 0x00000033
#define FILE_DEVICE_FULLSCREEN_VIDEO    0x00000034
#define FILE_DEVICE_DFS_FILE_SYSTEM     0x00000035
#define FILE_DEVICE_DFS_VOLUME          0x00000036
#define FILE_DEVICE_SERENUM             0x00000037
#define FILE_DEVICE_TERMSRV             0x00000038
#define FILE_DEVICE_KSEC                0x00000039

//
// Macro definition for defining IOCTL and FSCTL function control codes.  Note
// that function codes 0-2047 are reserved for Microsoft Corporation, and
// 2048-4095 are reserved for customers.
//

#define CTL_CODE( DeviceType, Function, Method, Access ) (                 \
    ((DeviceType) << 16) | ((Access) << 14) | ((Function) << 2) | (Method) \
)

//
// Macro to extract device type out of the device io control code
//
#define DEVICE_TYPE_FROM_CTL_CODE(ctrlCode)     (((DWORD)(ctrlCode & 0xffff0000)) >> 16)

//
// Define the method codes for how buffers are passed for I/O and FS controls
//

#define METHOD_BUFFERED                 0
#define METHOD_IN_DIRECT                1
#define METHOD_OUT_DIRECT               2
#define METHOD_NEITHER                  3

//
// Define the access check value for any access
//
//
// The FILE_READ_ACCESS and FILE_WRITE_ACCESS constants are also defined in
// ntioapi.h as FILE_READ_DATA and FILE_WRITE_DATA. The values for these
// constants *MUST* always be in sync.
//
//
// FILE_SPECIAL_ACCESS is checked by the NT I/O system the same as FILE_ANY_ACCESS.
// The file systems, however, may add additional access checks for I/O and FS controls
// that use this value.
//


#define FILE_ANY_ACCESS                 0
#define FILE_SPECIAL_ACCESS    (FILE_ANY_ACCESS)
#define FILE_READ_ACCESS          ( 0x0001 )    // file & pipe
#define FILE_WRITE_ACCESS         ( 0x0002 )    // file & pipe

// end_ntddk end_wdm end_nthal end_ntifs

#endif // _DEVIOCTL_


#ifndef _NTDDSTOR_H_
#define _NTDDSTOR_H_

#ifdef __cplusplus
extern "C" {
#endif

//
// IoControlCode values for storage devices
//

#define IOCTL_STORAGE_BASE FILE_DEVICE_MASS_STORAGE

//
// The following device control codes are common for all class drivers.  They
// should be used in place of the older IOCTL_DISK, IOCTL_CDROM and IOCTL_TAPE
// common codes
//

#define IOCTL_STORAGE_CHECK_VERIFY     CTL_CODE(IOCTL_STORAGE_BASE, 0x0200, METHOD_BUFFERED, FILE_READ_ACCESS)
#define IOCTL_STORAGE_CHECK_VERIFY2    CTL_CODE(IOCTL_STORAGE_BASE, 0x0200, METHOD_BUFFERED, FILE_ANY_ACCESS)
#define IOCTL_STORAGE_MEDIA_REMOVAL    CTL_CODE(IOCTL_STORAGE_BASE, 0x0201, METHOD_BUFFERED, FILE_READ_ACCESS)
#define IOCTL_STORAGE_EJECT_MEDIA      CTL_CODE(IOCTL_STORAGE_BASE, 0x0202, METHOD_BUFFERED, FILE_READ_ACCESS)
#define IOCTL_STORAGE_LOAD_MEDIA       CTL_CODE(IOCTL_STORAGE_BASE, 0x0203, METHOD_BUFFERED, FILE_READ_ACCESS)
#define IOCTL_STORAGE_LOAD_MEDIA2      CTL_CODE(IOCTL_STORAGE_BASE, 0x0203, METHOD_BUFFERED, FILE_ANY_ACCESS)
#define IOCTL_STORAGE_RESERVE          CTL_CODE(IOCTL_STORAGE_BASE, 0x0204, METHOD_BUFFERED, FILE_READ_ACCESS)
#define IOCTL_STORAGE_RELEASE          CTL_CODE(IOCTL_STORAGE_BASE, 0x0205, METHOD_BUFFERED, FILE_READ_ACCESS)
#define IOCTL_STORAGE_FIND_NEW_DEVICES CTL_CODE(IOCTL_STORAGE_BASE, 0x0206, METHOD_BUFFERED, FILE_READ_ACCESS)

#define IOCTL_STORAGE_EJECTION_CONTROL CTL_CODE(IOCTL_STORAGE_BASE, 0x0250, METHOD_BUFFERED, FILE_ANY_ACCESS)
#define IOCTL_STORAGE_MCN_CONTROL      CTL_CODE(IOCTL_STORAGE_BASE, 0x0251, METHOD_BUFFERED, FILE_ANY_ACCESS)

#define IOCTL_STORAGE_GET_MEDIA_TYPES  CTL_CODE(IOCTL_STORAGE_BASE, 0x0300, METHOD_BUFFERED, FILE_ANY_ACCESS)
#define IOCTL_STORAGE_GET_MEDIA_TYPES_EX CTL_CODE(IOCTL_STORAGE_BASE, 0x0301, METHOD_BUFFERED, FILE_ANY_ACCESS)

#define IOCTL_STORAGE_RESET_BUS        CTL_CODE(IOCTL_STORAGE_BASE, 0x0400, METHOD_BUFFERED, FILE_READ_ACCESS)
#define IOCTL_STORAGE_RESET_DEVICE     CTL_CODE(IOCTL_STORAGE_BASE, 0x0401, METHOD_BUFFERED, FILE_READ_ACCESS)

#define IOCTL_STORAGE_GET_DEVICE_NUMBER CTL_CODE(IOCTL_STORAGE_BASE, 0x0420, METHOD_BUFFERED, FILE_ANY_ACCESS)

#define IOCTL_STORAGE_PREDICT_FAILURE CTL_CODE(IOCTL_STORAGE_BASE, 0x0440, METHOD_BUFFERED, FILE_ANY_ACCESS)


//
// These ioctl codes are obsolete.  They are defined here to avoid resuing them
// and to allow class drivers to respond to them more easily.
//

#define OBSOLETE_IOCTL_STORAGE_RESET_BUS        CTL_CODE(IOCTL_STORAGE_BASE, 0x0400, METHOD_BUFFERED, FILE_READ_ACCESS | FILE_WRITE_ACCESS)
#define OBSOLETE_IOCTL_STORAGE_RESET_DEVICE     CTL_CODE(IOCTL_STORAGE_BASE, 0x0401, METHOD_BUFFERED, FILE_READ_ACCESS | FILE_WRITE_ACCESS)

//
// IOCTL_STORAGE_GET_DEVICE_NUMBER
//
// input - none
//
// output - STORAGE_DEVICE_NUMBER structure
//          The values in the STORAGE_DEVICE_NUMBER structure are guaranteed
//          to remain unchanged until the system is rebooted.  They are not
//          guaranteed to be persistant across boots.
//

typedef struct _STORAGE_DEVICE_NUMBER {

    //
    // The FILE_DEVICE_XXX type for this device.
    //

    DEVICE_TYPE DeviceType;

    //
    // The number of this device
    //

    DWORD       DeviceNumber;

    //
    // If the device is partitionable, the partition number of the device.
    // Otherwise -1
    //

    DWORD       PartitionNumber;
} STORAGE_DEVICE_NUMBER, *PSTORAGE_DEVICE_NUMBER;

//
// Define the structures for scsi resets
//

typedef struct _STORAGE_BUS_RESET_REQUEST {
    BYTE  PathId;
} STORAGE_BUS_RESET_REQUEST, *PSTORAGE_BUS_RESET_REQUEST;

//
// IOCTL_STORAGE_MEDIA_REMOVAL disables the mechanism
// on a storage device that ejects media. This function
// may or may not be supported on storage devices that
// support removable media.
//
// TRUE means prevent media from being removed.
// FALSE means allow media removal.
//

typedef struct _PREVENT_MEDIA_REMOVAL {
    BOOLEAN PreventMediaRemoval;
} PREVENT_MEDIA_REMOVAL, *PPREVENT_MEDIA_REMOVAL;

// begin_ntminitape


typedef struct _TAPE_STATISTICS {
    DWORD Version;
    DWORD Flags;
    LARGE_INTEGER RecoveredWrites;
    LARGE_INTEGER UnrecoveredWrites;
    LARGE_INTEGER RecoveredReads;
    LARGE_INTEGER UnrecoveredReads;
    BYTE          CompressionRatioReads;
    BYTE          CompressionRatioWrites;
} TAPE_STATISTICS, *PTAPE_STATISTICS;

#define RECOVERED_WRITES_VALID   0x00000001
#define UNRECOVERED_WRITES_VALID 0x00000002
#define RECOVERED_READS_VALID    0x00000004
#define UNRECOVERED_READS_VALID  0x00000008
#define WRITE_COMPRESSION_INFO_VALID  0x00000010
#define READ_COMPRESSION_INFO_VALID   0x00000020

typedef struct _TAPE_GET_STATISTICS {
    DWORD Operation;
} TAPE_GET_STATISTICS, *PTAPE_GET_STATISTICS;

#define TAPE_RETURN_STATISTICS 0L
#define TAPE_RETURN_ENV_INFO   1L
#define TAPE_RESET_STATISTICS  2L

//
// IOCTL_STORAGE_GET_MEDIA_TYPES_EX will return an array of DEVICE_MEDIA_INFO
// structures, one per supported type, embedded in the GET_MEDIA_TYPES struct.
//

typedef enum _STORAGE_MEDIA_TYPE {
    //
    // Following are defined in ntdddisk.h in the MEDIA_TYPE enum
    //
    // Unknown,                // Format is unknown
    // F5_1Pt2_512,            // 5.25", 1.2MB,  512 bytes/sector
    // F3_1Pt44_512,           // 3.5",  1.44MB, 512 bytes/sector
    // F3_2Pt88_512,           // 3.5",  2.88MB, 512 bytes/sector
    // F3_20Pt8_512,           // 3.5",  20.8MB, 512 bytes/sector
    // F3_720_512,             // 3.5",  720KB,  512 bytes/sector
    // F5_360_512,             // 5.25", 360KB,  512 bytes/sector
    // F5_320_512,             // 5.25", 320KB,  512 bytes/sector
    // F5_320_1024,            // 5.25", 320KB,  1024 bytes/sector
    // F5_180_512,             // 5.25", 180KB,  512 bytes/sector
    // F5_160_512,             // 5.25", 160KB,  512 bytes/sector
    // RemovableMedia,         // Removable media other than floppy
    // FixedMedia,             // Fixed hard disk media
    // F3_120M_512,            // 3.5", 120M Floppy
    // F3_640_512,             // 3.5" ,  640KB,  512 bytes/sector
    // F5_640_512,             // 5.25",  640KB,  512 bytes/sector
    // F5_720_512,             // 5.25",  720KB,  512 bytes/sector
    // F3_1Pt2_512,            // 3.5" ,  1.2Mb,  512 bytes/sector
    // F3_1Pt23_1024,          // 3.5" ,  1.23Mb, 1024 bytes/sector
    // F5_1Pt23_1024,          // 5.25",  1.23MB, 1024 bytes/sector