dbdaoerr.h

希望我上传的这些东西可以对搞编程的程序员有点小小的帮助！谢谢！

#define E_DAO_ValueNotSet					DBDAOERR(3503) //The Synchronizer's Registry has no value set for the key you queried.
#define E_DAO_REPInvalidTID					DBDAOERR(3504) //The Synchronizer ID does not match an existing ID in the MSysTranspAddress table.
#define E_DAO_REPFilterNotFound				DBDAOERR(3505) //You attempted to delete or get information about a partial filter that does not exist in MSysFilters.
#define E_DAO_OpenLog						DBDAOERR(3506) //The Synchronizer is unable to open the Synchronizer log.
#define E_DAO_WriteLog						DBDAOERR(3507) //Failure writing to the Synchronizer log.
#define E_DAO_NoTransport					DBDAOERR(3508) //There is no active transport for the Synchronizer.
#define E_DAO_TransportNotFound				DBDAOERR(3509) //Could not find a valid transport for this Synchronizer.
#define E_DAO_ReplicaAlreadyLocked			DBDAOERR(3510) //The member of the replica set you are attempting to synchronize is currently being used in another synchronization.
#define E_DAO_DBAccess						DBDAOERR(3511) //*
#define E_DAO_TransportReadFailure			DBDAOERR(3512) //Failed to read the dropbox folder.
#define E_DAO_TransportWriteFailure			DBDAOERR(3513) //Failed to write to the dropbox folder.
#define E_DAO_NoExchange					DBDAOERR(3514) //Synchronizer could not find any scheduled or on-demand synchronizations to process.
#define E_DAO_SysClock						DBDAOERR(3515) //The Microsoft Jet database engine could not read the system clock on your computer.
#define E_DAO_NoTransportAddress			DBDAOERR(3516) //Destination synchronizer is not configured to support indirect synchronronization, and the destination replica is unavailable for direct synchronization
#define E_DAO_NoMessage						DBDAOERR(3517) //Synchronizer could not find any messages to process.
#define E_DAO_TransporterNotFound			DBDAOERR(3518) //Could not find Synchronizer in the MSysTranspAddress table.
#define E_DAO_TransportSendFailure			DBDAOERR(3519) //Failed to send a message.
#define E_DAO_ReplicaNotFound				DBDAOERR(3520) //The replica name or ID does not match a currently managed member of the replica set.
#define E_DAO_OutOfSynch					DBDAOERR(3521) //Two members of the replica set cannot be synchronized because there is no common point to start the synchronization.
#define E_DAO_ExchangeNotFound				DBDAOERR(3522) //Synchronizer cannot find the record of a specific synchronization in the MSysExchangeLog table.
#define E_DAO_SchemaNotFound				DBDAOERR(3523) //Synchronizer cannot find a specific version number in the MSysSchChange table.
#define E_DAO_SchemaHistMismatch			DBDAOERR(3524) //The history of design changes in the replica does not match the history in the Design Master.
#define E_DAO_MessageDBAccess				DBDAOERR(3525) //Synchronizer could not access the message database.
#define E_DAO_ObjectAlreadyExists			DBDAOERR(3526) //The name selected for the system object is already in use.
#define E_DAO_ObjectDoesntExist				DBDAOERR(3527) //The Synchronizer or Replication Manager could not find the system object.
#define E_DAO_NoNewData						DBDAOERR(3528) //There is no new data in shared memory for the Synchronizer or Replication Manager to read.
#define E_DAO_PrevDataNotRead				DBDAOERR(3529) //The Synchronizer or Replication Manager found unread data in the shared memory. The existing data will be overwritten.
#define E_DAO_ClientAlreadyExists			DBDAOERR(3530) //The Synchronizer is already serving a client.
#define E_DAO_WaitTimeout					DBDAOERR(3531) //The wait period for an event has timed out.
#define E_DAO_ServerInitialization			DBDAOERR(3532) //Synchronizer could not be initialized.
#define E_DAO_ObjectAbandoned				DBDAOERR(3533) //The system object used by a process still exists after the process has stopped.
#define E_DAO_NoEvent						DBDAOERR(3534) //Synchronizer looked for a system event but did not find one to report to the client.
#define E_DAO_ClientSentTerm				DBDAOERR(3535) //Client has asked the Synchronizer to terminate operation.
#define E_DAO_InvalidMessage				DBDAOERR(3536) //Synchronizer received an invalid message for a member of the replica set that it manages.
#define E_DAO_NoClient						DBDAOERR(3537) //The Synchronizer's client is no longer present and cannot be notified.
#define E_DAO_TooManyTasks					DBDAOERR(3538) //Cannot initialize Synchronizer because there are too many applications running.
#define E_DAO_SysDiskIO						DBDAOERR(3539) //A system error has occurred or your swap file has reached its limit.
#define E_DAO_PageFile						DBDAOERR(3540) //Your swap file has reached its limit or is corrupted.
#define E_DAO_ProcessStillActive			DBDAOERR(3541) //Synchronizer could not be shut down properly and is still active.
#define E_DAO_ProcessAborted				DBDAOERR(3542) //Process stopped when attempting to terminate Synchronizer client.
#define E_DAO_TransporterNotSetup			DBDAOERR(3543) //Synchronizer has not been set up.
#define E_DAO_ServerAlreadyRunning			DBDAOERR(3544) //Synchronizer is already running.
#define E_DAO_DiffReplicaSet				DBDAOERR(3545) //The two replicas you are attempting to synchronize are from different replica sets.
#define E_DAO_BadExchangeType				DBDAOERR(3546) //The type of synchronization you are attempting is not valid.
#define E_DAO_NoReplica						DBDAOERR(3547) //Synchronizer could not find a replica from the correct set to complete the synchronization.
#define E_DAO_GuidMismatch					DBDAOERR(3548) //GUIDs do not match or the requested GUID could not be found.
#define E_DAO_FilenameTooLong				DBDAOERR(3549) //The file name you provided is too long.
#define E_DAO_NoGuidIndex					DBDAOERR(3550) //There is no index on the GUID column.
#define E_DAO_UnableToDeleteParam			DBDAOERR(3551) //Unable to delete the specified Registry parameter for the Synchronizer.
#define E_DAO_ValueTooBig					DBDAOERR(3552) //The size of the Registry parameter exceeds the maximum allowed.
#define E_DAO_REPGuidCreateFailure			DBDAOERR(3553) //The GUID could not be created.
#define E_DAO_REPDBMovedCopied				DBDAOERR(3554) //*
#define E_DAO_REPNoValidNick				DBDAOERR(3555) //All valid nicknames for replicas are already in use.
#define E_DAO_TransportDestInvalidPath		DBDAOERR(3556) //Invalid path for destination dropbox folder.
#define E_DAO_TransDestInvalidAddress		DBDAOERR(3557) //Invalid address for destination dropbox folder.
#define E_DAO_TransportDestDiskIO			DBDAOERR(3558) //Disk I/O error at destination dropbox folder.
#define E_DAO_TransportDestDiskFull			DBDAOERR(3559) //Failure to write because destination disk is full.
#define E_DAO_REPSameReplicaID				DBDAOERR(3560) //The two members of the replica set you are attempting to synchronize have the same ReplicaID.
#define E_DAO_REPBothMasters				DBDAOERR(3561) //The two members of the replica set you are attempting to synchronize are both Design Masters.
#define E_DAO_TransDestAccessDenied			DBDAOERR(3562) //Access denied at destination dropbox folder.
#define E_DAO_TransportSrcAccess			DBDAOERR(3563) //Fatal error accessing a local dropbox folder.
#define E_DAO_TransportSrcFileNotFound		DBDAOERR(3564) //Synchronizer can't find the source file for messages.
#define E_DAO_TransSrcSharingViolation		DBDAOERR(3565) //There is a sharing violation in the source dropbox folder because the message database is open in another application.
#define E_DAO_NetworkIO						DBDAOERR(3566) //Network I/O error.
#define E_DAO_TransportWrongMessage			DBDAOERR(3567) //Message in dropbox folder belongs to the wrong Synchronizer.
#define E_DAO_TransportDeleteFailure		DBDAOERR(3568) //Synchronizer could not delete a file.
#define E_DAO_RepRemoved					DBDAOERR(3569) //This member of the replica set has been logically removed from the set and is no longer available.
#define E_DAO_FiltersChanged				DBDAOERR(3570) //The filters defining a partial replica are out of synch with each other.
#define E_DAO_LimitedUpdate					DBDAOERR(3571) //The attempt  to set a column in a partial replica violated a rule governing partial replicas.
#define E_DAO_TempDiskIO					DBDAOERR(3572) //A disk I/O error occurred while reading or writing to the TEMP directory.
#define E_DAO_DirNotManaged					DBDAOERR(3573) //The directory you queried for a list of replicas is not a managed directory.
#define E_DAO_RepidChanged					DBDAOERR(3574) //The ReplicaID for this member of the replica set was reassigned during a move or copy procedure.
#define E_DAO_DiskFullM						DBDAOERR(3575) //The disk drive you are attempting to write to is full.
#define E_DAO_ShareViolationM				DBDAOERR(3576) //The database you are attempting to open is already in use by another application.
#define E_DAO_UpdateReplCol					DBDAOERR(3577) //Can't update replication system column.
#define E_DAO_GetDbinfoM					DBDAOERR(3578) //Failure to replicate database; can't determine whether the database is open in exclusive mode.
#define E_DAO_MakeRepTablesM				DBDAOERR(3579) //Could not create replication system tables needed to make the database replicable.
#define E_DAO_AddReplicaInfoM				DBDAOERR(3580) //Could not add rows needed to make the database replicable.
#define E_DAO_OpenRepTablesM				DBDAOERR(3581) //Can't open replication system table '|' because the table is already in use.
#define E_DAO_CreateReplicaObjectM			DBDAOERR(3582) //Cannot make a new replica because the |2 object in |1 container could not be made replicable.
#define E_DAO_MakeObjectReplM				DBDAOERR(3583) //Cannot make the |2 object in |1 container replicable.
#define E_DAO_OutOfMemoryM					DBDAOERR(3584) //Insufficient memory to complete operation.
#define E_DAO_RepTooManyColumnsM			DBDAOERR(3585) //Can't replicate the table; the number of columns exceeds the maximum allowed.
#define E_DAO_PARTFilterExprSyntaxM			DBDAOERR(3586) //Syntax error in partial filter expression on table |1.
#define E_DAO_PARTUnknownTokenM				DBDAOERR(3587) //Invalid expression in the ReplicaFilter property.
#define E_DAO_PARTExprEvaluationM			DBDAOERR(3588) //Error when evaluating the partial filter expression.
#define E_DAO_PARTExprUnknownFuncM			DBDAOERR(3589) //The partial filter expression contains an unknown function.
#define E_DAO_LimitedUpdateM				DBDAOERR(3590) //Violates the rules for partial replicas.
#define E_DAO_LogInvalidPathM				DBDAOERR(3591) //Log file path '|1' is invalid.
#define E_DAO_REPPasswdNotAllowed			DBDAOERR(3592) //You can't replicate a password-protected database or set password protection on a replicated database.
#define E_DAO_BadSingleMasterAttrib			DBDAOERR(3593) //You can't change the data master attribute for the replica set.
#define E_DAO_BadMultiMasterAttrib			DBDAOERR(3594) //You can't change the data master attribute for the replica set.  It allows data changes only at the Design Master.
#define E_DAO_REPCantRepair					DBDAOERR(3595) //The system tables in your replica are no longer reliable and the replica should not be used.
#define E_DAO_NoDataIncluded				DBDAOERR(3596) //*
#define E_DAO_SenderNotFound				DBDAOERR(3597) //*
#define E_DAO_CouldnotFindService			DBDAOERR(3598) //*
#define E_DAO_UnableToStartService			DBDAOERR(3599) //*
#define E_DAO_ExprAggIllegalOnGuid			DBDAOERR(3600) //Aggregation expressions cannot use GUIDs.
#define E_DAO_RefreshReplicaList			DBDAOERR(3601) //*
#define E_DAO_MoreWorkNeeded				DBDAOERR(3602) //*
#define E_DAO_SenderTooOld					DBDAOERR(3603) //*
#define E_DAO_RepAccess						DBDAOERR(3604) //*
#define E_DAO_REPDbNotReplicableM			DBDAOERR(3605) //Synchronizing with a non-replicated database is not allowed. The '|' database is not a Design Master or replica.
#define E_DAO_DaemonDied					DBDAOERR(3606) //*
#define E_DAO_REPCantDelete					DBDAOERR(3607) //The replication property you are attempting to delete is read-only and cannot be removed.
#define E_DAO_IndexCantBuild				DBDAOERR(3608) //Record length is too long for an indexed Paradox table.
#define E_DAO_RelNoPrimaryIndex				DBDAOERR(3609) //No unique index found for the referenced field of the primary table.
#define E_DAO_QuerySameSrcDestTableM		DBDAOERR(3610) //Same table '|' referenced as both the source and destination in make-table query.
#define E_DAO_InvalidDDLObject				DBDAOERR(3611) //Can't execute data definition statements on linked data sources.
#define E_DAO_QueryMGBWithSubquery			DBDAOERR(3612) //Multi-level GROUP BY clause is not allowed in a subquery.
#define E_DAO_SQLLinkNotSupported			DBDAOERR(3613) //Can't create a relationship on linked ODBC tables.
#define E_DAO_InvalidFindOnGUID				DBDAOERR(3614) //GUID not allowed in Find method criteria expression.
#define E_DAO_QueryJoinExprInComp			DBDAOERR(3615) //Type mismatch in JOIN expression.
#define E_DAO_UpdateNotAvailable			DBDAOERR(3616) //Updating data in a linked table is not supported by this ISAM.
#define E_DAO_DeleteNotAvailable			DBDAOERR(3617) //Deleting data in a linked table is not supported by this ISAM.
#define E_DAO_ExceptTableCreateFail			DBDAOERR(3618) //Exceptions table could not be created on import/export.
#define E_DAO_ExceptTableWriteFail			DBDAOERR(3619) //Records could not be added to exceptions table.
#define E_DAO_ExcelOLEConnectLost			DBDAOERR(3620) //The connection for viewing your linked Microsoft Excel worksheet was lost.
#define E_DAO_CantChangeDbPwdOnShared		DBDAOERR(3621) //Can't change password on a shared open database.
#define E_DAO_RmtMustCheckTimeStamp			DBDAOERR(3622) //You must use the dbSeeChanges option with OpenRecordset when accessing a SQL Server table that has an IDENTITY column.
#define E_DAO_NotWithBoundFileM				DBDAOERR(3623) //Cannot access the FoxPro 3.0 bound DBF file '|'.
#define E_DAO_CommitConflict				DBDAOERR(3624) //Couldn't read the record; currently locked by another user.
#define E_DAO_NoSuchSpecM					DBDAOERR(3625) //The text file specification '|' does not exist.  You can't import, export, or link using the specification.
#define E_DAO_TooManyIndexesM				DBDAOERR(3626) //The operation failed.  There are too many indexes on table '|'.  Delete some of the indexes on the table and try the operation again.
#define E_DAO_TransExeNotFound				DBDAOERR(3627) //Cannot find the executable file for the Synchronizer (mstran35.exe).
#define E_DAO_RemRepNotManaged				DBDAOERR(3628) //Partner replica is not managed by a Synchronizer.
#define E_DAO_FSDropboxShared				DBDAOERR(3629) //Synchronizer '|1' is also using the same File System dropbox '|2'.
#define E_DAO_FSDropboxSharedM				DBDAOERR(3630) //Synchronizer '|1' is also using the same File System dropbox '|2'.
#define E_DAO_RepInvalidTableInFilter		DBDAOERR(3631) //Invalid Table Name In Filter
#define E_DAO_InetNotEnabled				DBDAOERR(3632) //Int